Tested with i9 13th 16core

4100 Simple Queue with fq-codel -- CPU hitting 18% @ 10Gbps

the NFO has deployed the fibre

Thanks dtaht

I think I am going to try Mikrotik with an X86 Xeon setup and if that does not work I will definitely try LibreQoE.

I already use Preseem for my wireless clients but this will be for my Fibre clients so it needs to be a cost-effective solution

Hi I am thinking of putting in a CCR2116 inline for shaping 5000 clients with simple queues and fq_codel Between 10Gbps and 12Gbps at peak times at the moment Will bond 2x 10Gbps to a CCR1072 which is doing the PPPoE without any simple queues at the moment. Splynx will then inject the simple queue t...

Is it possible to change http://www.mikrotik.com/download/centos.tar.bz2 HDD Size
Say from 2Gigs to 10Gigs ?

Hi I have done something similar to that , just used add to src-address-list... I add all my clients that use p2p to the list and shape high udp/tcp ports with queue tree and pcq queues . Also have marked all know traffic that uses high ports and passthrough off action=add-src-to-address-list addres...

Power was off on the routerboard
card was inserted
Pigtail and antenna put on
Put Power back on the router

Card worked great for 2 to 5mins
Changed frequency
Card stop working
Card settings @ default


This is a pity , i had great faith in the R5H but will go back to using XR5

Just had my first R5H go up in smoke after working for 2mins now.

RB532
v3.27

Thanks

Good day Can you use wildcards within a script with routeros ? :global dslip [ /ip address get [/ip address find interface=dsl ] address ] :if ($dslip !="211.*") do={ /system script run pppoe-running} My isp will change my ip address once my international capped is reach but will be allowe...

Hi aea9tthompson

I was wonder if you could show me how you get your ping average on the dude map ?

Hi I have a couple of small relay links that need to be setup. I would like to bridge these relay points with the next main site and run pppoe on it. RB433 bridged Relay 0 X name="bridge" mtu=1500 arp=enabled mac-address=00:0C:42:0C:BE:EB protocol-mode=none priority=0x8000 auto-mac=yes adm...

Hi

Not sure if this is possible but would like to know if i had a script that telnet into port 25 and it did not come back with a response i could then execute a command / ip firewall nat set [find comment=redirect_port25] disabled=no

Any ideas ?