Hello MKX and All, Thank you for your previous response. Based upon your explanation I configured the Mikrotik hEX PoE as followed: Port 1 WAN Port 2 Main LAN Port 3 LAN 2 Port 4 LAN 3 Port 5 VLAN TRUNK ( 2 other subnets to Mikrotik RB260 Switches) I did not use a bridge as it was not needed but I d...

Hello MKX, Thank you for the reply. To clarify my diagram a bit the firewall pictured is the Mikrotik hEX PoE router and I created a trunk port on port 5 of the router to expand the ports of the router. Port 5 is then connected to a Mikrotik RB260GS switch and to that I connected the individual RB26...

Hello All, I am attempting to configure a home Iot using the hEX PoE (RB960PGS) using the router on a stick / inter-vlan topology and I am confused as to whether or not on the router if I still have configure the vlans in a bridge. I have configured the vlans on the individual Mikrotik switches (RB2...

Hello Everyone, I am hoping to get some assistance with an issue that I can't seem to figure out with regards to seeing one or two users active in the users list when I log into winbox as I am the only user to this router. I installed RouterOS version 6.35 and run the dude on an x86 server and whene...

Hello dgnevans, Thank you for your assistance in suggesting that I check my firewall rules. I did just that and found that in my address list to block bad IP's I found one that was 192.0.0.0/2 and after going through 2754 addresses I had to remove that one to resolve my issue. It makes a lot of sens...

Hello Soonwai, Thank you for your reply. I will try the rule adjustment you suggested and update you with the result. To answer dgnevans question the server being used is linux. As for going through the firewall rules I will review them again after I try the aforementioned suggestion. Thank you both...

Hello All, I would like to ask for some assistance and/or pointers on how to resolve an issue I've been having for about 2 weeks that driving me up the walls. I was trying to upgrade a web server by running a WGET command but kept getting "host unreachable". I then attempted to ping google...

Hello All, Thank you for the reply's. I was able to resolve all my issues by turning off all my firewall rules and enabling them one by one to find the one causing me to be unable to access the dude. Once I found the rule (drop all) I created a rule to allow port 2211 on my local LAN then re-enabled...

Hello All, Kind of new to using the forum and thank you for the replies. The screenshot taken at the time was just as an example of what I was receiving however the dude server was/ is running as I did a dude/ print and that's what it showed. As for using the latest stable version of the dude as sta...

dude client v6.35 connect timeout.jpg Hello All, I recently installed the dude version 6.35 on an x86 machine by importing my .xml files from my current dude version 3.6 as importing the .xml backup file to all the current versions did not work. The install on v6.35 worked and I was able to view my...

Hello All, As this is my first time using this forum I am not too sure where to begin but I am I desperately need some help from anyone that can offer it. I am currently using an RB450 for PPtP and Radius authentication for several remote RB433 base stations. When any user attempts to connect to the...