Described situation was on RouterOS 7.4.1 (stable).

Looks like switching to 7.5rc1 (testing) is a fixing problem for Planet MFB-FX SFP module.
Hope to achieve this on stable release too.

EEPROM readings on HP x111 100M module is still partial. No link.

Following Mikrotik hardware support wiki: https://wiki.mikrotik.com/wiki/MikroTik_wired_interface_compatibility#SFP_interface_compatibility_with_100M_optical_transceivers I found that my “NetMetal ac²” should support 100Mbit/s fiber modules in its SFP cage. I tried Planet MFB-FX and HP x111 100M mod...

ARP list on LTE interface is filling up with all-Internet-wide IP's. This ARP list is going to be endless. That is likely a configuration mistake. You enabled proxy-ARP? For LTE interfaces there is no ARP config at all. But looking to APR list there is a feeling exactly like in case of PROXY-ARP. A...

ARP list on LTE interface is filling up with all-Internet-wide IP's.
This ARP list is going to be endless.

Equipment:
wAPR-2nD with R11e-LTE (LTE firmware: MikroTik_CP_2.160.000_v020)
mipsbe v.7.2 (stable)

BGP is missing in SMIPS v.7.2.1 (Stable) package.
Is it a “new normal” or mistake?

P.S. I upgraded my RB941 to v.7.2.1 directly from v.6.49.2, so I can’t comment about SMIPS BGP status in previous v.7.x releases.

Recently I tried RouterOS 7beta on my “wAP LTE kit” box. Upgrade procedure was smooth, and router was operational, but it seems that it did not detect built-in 4G modem card R11e-LTE. So I was forced to do a quick downgrade back to stable version 6. Is this modem supported in RouterOS 7beta ? Or not...

I started to sanitize configs for production of cleaner supout file. But after several reboots, /ip ipsec section is accessible again. Off course all IPsec config was lost and should be re-added from pre upgrade backups. Now all boxes restored in working state. Platform summary - The problem was on ...

The same IPSEC config problem on some RB2011 (mipsBE) device too. Console output: /ip ipsec profile> add ..... error - contact MikroTik support and send a supout file /ip ipsec export #error exporting /ip ipsec mode-config #error exporting /ip ipsec peer #error exporting /ip ipsec policy group #erro...

The same problem on some RB2011 (mipsBE) device too. Console output: /ip ipsec profile> add ..... error - contact MikroTik support and send a supout file /ip ipsec export #error exporting /ip ipsec mode-config #error exporting /ip ipsec peer #error exporting /ip ipsec policy group #error exporting /...

BUG – v.6.44 on ARM boxes RB3011 is losing IPSEC configuration After upgrade of ARM boxes (RB3011) to latest stable version 6.44, IPSEC is not working. Winbox GUI /ip ipsec section in is empty and no new config parameters can be added; In console /ip ipsec export gives just info that all subsection...

BUG – v.6.44 on ARM boxes RB3011 is losing IPSEC configuration After upgrade of ARM boxes (RB3011) to latest stable version 6.44, IPSEC is not working. Winbox GUI /ip ipsec section in is empty and no new config parameters can be added; In console /ip ipsec export gives just info that all subsection...

My RB941-2nD (smips) routers are installed as separate (just selected ones) RouterOS package setup.
Doing upgrade to v6.43 via Dude, devices are loosing Wireless package.

P.S. Upgrade from Mikrotik website via "Check for Update" function works correctly.

Config made according to: https://wiki.mikrotik.com/wiki/Manual:CRS1xx/2xx_series_switches_examples#VLAN_Based_Mirroring Initialy it was tested on some RouterOS 6.41rc__ and was very promising, but in reality - until version 6.42.4 it works for just a few minutes from system startup. Starting from v...

Just noticed, The Dude shows installed individual packages in random order per device. In my case all devices /software versions are equal, but package names in Dude “Device” tab are displayed in a random sequence. It may confuse admins during software upgrade process. It would be nice to show them ...

Thanks for reply... With “programmed delay” i mean exactly thous things (combination of them) You are mentioning – Interval, Timeout, Down Count. So I am in a following situations: #1 Probe is going really down and after some 10-15 min i get DOWN notification. Service is restored and i got UP notifi...

I am using e-mail notifications from Dude about nodes going down and up. In situations when service is unstable, its very nice to use a programmed delays for notification sending. Unfortunately this delay is configurable only for DOWN event and is not influencing related UP messages. Maybe there is ...

If Mikrotik routers ARP list contains entry's without corresponding MAC’s (device dos not exists), then The Dude shows fake MAC’s in its section Devices → MAC Mappings. All non-existing/unknown MACs in Dude -> Devices -> MacMappings menu are marked as "XEROXCORP:00:06:00" In other TheDude ...