MikroTik

muetzekoeln

Yes please, implement this mikrotik!

muetzekoeln

I would like to request a separate wifiwave2 package for IPQ4018/IPQ4019 devices with 16MB of ROM. With such a package a lot of more users could test this it, send feedbacks and bug reports which will result in an earlier available bugfree stable release.

+1

muetzekoeln

+1

viewtopic.php?f=2&t=45934&p=701850&hilit=BBR#p701850

muetzekoeln

WiFi 6 ( 6 GHz )

WiFi6 ist 2.4 and 5 GHz.
WiFi6e includes 6GHz

muetzekoeln

RFC8325 section 4.3 gives recommendations for translation from DSCP codepoints to WMM categories. These differ from the default translation in RouterOS... Here is the table from RFC8325 compared with from-dscp-high-3-bits result: IETF DSCP RFC WMM MKT DiffServ Code 8325 Access 3-bits Service Point ...

muetzekoeln

It is a bit of a pity that that article does not contain any examples, and that the "by default usually wanted" configuration of "take priority from DSCP" is not included in the default config of RouterOS ... new-priority=from-dscp-high-3-bits Sorry, for still off-topic. I would...

muetzekoeln

WMM priority when received over WLAN how is it marked? DSCP (TOS) or MKT priority?

See:
http://wifi-insider.com/wlan/wmm.htm

muetzekoeln

I would like to know how to use "high priorities on WLAN (no mangle rule needed)" , and get those high priorities without mangle rules. This is how I understand it: When AP and station are WMM enabled each can send (after negotiation) priority frames. So PC or TV could use more airtime. T...

muetzekoeln

wmm-support=enabled (still studying what the impact is) but how can it work without the QoS priority mangle rules. Everything is priority 0! No differentiation or special handling. With WMM enabled NAS or TV could dominate airtime, when using high priorities on WLAN (no mangle rule needed). Frames ...

muetzekoeln

What do you mean by wlan1? This is just the first time when I use Mikrotik.
if you mean 2.4 GHz Wi-Fi, then I do not use it.

Yes, 2.4GHz. It's worth a try!

muetzekoeln

Try with hw-protection-mode=none and wmm-support=disabled or ampdu-priorities=0,1,2,3,4,5,6,7.
Do you have the same problems when using wlan1?

muetzekoeln

If you are using priorities, you should enable HT-AMDPU for used priorities.

See
viewtopic.php?t=141081#p751458

muetzekoeln

+6Ghz (Wifi 6e) support

muetzekoeln

+1

see also:
viewtopic.php?t=110925
viewtopic.php?t=42614
viewtopic.php?t=94291

Internet-Uplinks going IPv6 only. Small IoT devices stick to IPv4.

muetzekoeln

+1

It's standard with other vendors

muetzekoeln

we need both DOH and DNS forwarding.

+1

muetzekoeln

Bump...

No supporters?

muetzekoeln

+1 ... PLEASE ...

IPv6 really arrived!

muetzekoeln

+1 (for my dual-homed setup)

Also IPv4 to IPv6 address-port-translation is needed (initiator of connection on v4-side). Many small devices (aka IoT) or legacy devices only have IPv4 stack, but carriers will only offer IPv6 addresses in the very near future.

muetzekoeln

There a devices (phase coupler) for this. But you need an electrician to install.

viewtopic.php?f=7&t=148993&p=734790&hilit=phase#p734790

muetzekoeln

There are also other region locks.

Please, can you post a list?
I would also like to know if there are plans for ETSI or DE (Germany) region locks.

muetzekoeln

muetzekoeln

Hey Mikrotik,
please implement dot11w PMF in the next ROS release! It's about time ...

muetzekoeln

+1

IPv6 should at least have the same (if not more) features in ROS as IPv4.

muetzekoeln

It could synchronize NV2 Tx/Rx time slots to help against co-location interference, without GPS hardware.

You need a central grand master clock in your network. These a typical GNSS (GPS, GLONASS, Galileo, ..) based.

muetzekoeln

Add static route to 192.168.30.0/24 with gateway 192.168.10.43 on your Fritzbox.

muetzekoeln

IEEE1588 and SyncE would be great, but requires specific support in hardware level IEEE1588 works without hardware support, but performance is not so good. It even works over WLAN: https://www.researchgate.net/profile/Wu_Chen9/publication/276305251_An_implementation_of_IEEE_1588_protocol_for_IEEE_8...

muetzekoeln

+1

I support this feature request. ROS already has the dangerous UPNP server. Why not add UPNP client for cases where ROS device is not the WAN router.
This would be useful e.g. for requesting the routers WAN address by UPNP to make use of it in ROS (e.g. ping it).

muetzekoeln

MVR is not supported in ROS. Other manufactures (Netgear, TP-Link, Zyxel) have it.

In addition some users have problems with IGMPv3 for IPTV with ROS. E.g:
viewtopic.php?t=125722

muetzekoeln

I have a small feature-request in the wireless departement:

Please make antenna-gain respected when using superchannel and no-country-set. It is useful for test-setups to lower output power and this is easily done by increasing antenna-gain setting.

muetzekoeln

DHCP server ... disabled

What about this?

/ip dhcp-server
add authoritative=after-2sec-delay interface=ether1 lease-time=3d name=dhcp1

muetzekoeln

Disable DHCP-client on your Mikrotik devices. They have static IPs already.
Also, check that DHCP-Relay is disabled.

muetzekoeln

+++ 1. Is this around yet?

No. Maybe you can add it to a wishlist for ROS 8 features

muetzekoeln

I presume this will have 802.11r/k/v ?

You are quite alone with this. Unfortunately!

muetzekoeln

Absolutely; support was first-class and did get on it! You need to set all radio queues to use aggregation with '/interface wireless set ampdu-priorities=0,1,2,3,4,5,6,7'; without block aggregation, the medium is quickly overwhelmed with management packets at the basic rate (typically 6Mb/s). By de...

muetzekoeln

When packets get a priority between 1 and 7, which maps to a WMM traffic class (eg with [1]), I can't get transmit more than 20-25Mbits/s UDP [2,3] shared to all clients. If I set the priority to 0 (or disable the rule), I get 440Mbits/s. ... The WMM enabled/disabled setting on the wlan interface d...

muetzekoeln

RFC8325 section 4.3 gives recommendations for translation from DSCP codepoints to WMM categories. These differ from the default translation in RouterOS (https://wiki.mikrotik.com/wiki/Manual:WMM) when setting packet priority by from-dscp-high-3-bits . Would be good to have an additional option for s...

muetzekoeln

With the new kernel version in RouterOS v7 it could be possible to use containers for supporting third-party packages. It would be great to have some OpenSource software available as optional packages in ROS, like Let's Encrypt Freeradius Wireguard FRRouting udpxy iPerf3 NGINX MaraDNS, dnsmasq Mikro...

muetzekoeln

See also:

viewtopic.php?t=133186

muetzekoeln

Do you use layer7 matcher in firewall? Maybe some string there matches a part of a language name from the translate menu.

muetzekoeln

I use my Fritzbox as WLAN-AP and VoIP/DECT gateway in IP-Client-Mode. For WAN I have an Zyxel VDSL-Box in Bridge-Mode. Mikrotik HEX POE as Router (doing PPPoE, NAT and firewalling). Fritzbox as a Router is meant as a all-in-one solution. May have unwanted side-effects when used together with another...

muetzekoeln

Do you both know about Safe Mode?

Safe Mode is quite the opposite of the requested commit!

The idea is to collect all changes and apply them at once!

muetzekoeln

Maybe you configured the Mikrotik to use NAT? And take care with that Fritzbox. I have the same. You cannot use it as simple Modem. Also do not use the builtin Ethernports as a switch. I will not forward all packets (some DHCP packets in my case) and it doesn' t like VLAN tagged packets. If you use ...

muetzekoeln

add the command :commit to commit all the changes to the flash, otherwise to discard changes after reboot

+1

Have seen it in professional equipment before. Very useful!!

muetzekoeln

add
- 802.11w support; viewtopic.php?t=108923
- EAP-PWD (RFC5931) support; viewtopic.php?t=129518#p726274

muetzekoeln

See:

viewtopic.php?t=122753

Do you want 802.11w?
viewtopic.php?t=129518#p670805
viewtopic.php?t=108923

muetzekoeln

Let's collect all feature requests (for ROS 7) regarding wireless in this thread. Starting with an extended version of an existing request my me: - dot11k/r/v based roaming / AP steering in CAPsManager; https://forum.mikrotik.com/viewtopic.php?t=86271&start=50 - dot11k/r/v based band steering (a...

muetzekoeln

This is an old thread.

Which version of ROS did change this? Or was the information from this old thread wrong? And by the way, what is the default value? Infinitely, as FAQ states? Normis??

muetzekoeln

The regulation you linked states also: Dit is het maximum gemiddelde e.i.r.p., hiermee wordt het e.i.r.p. bedoeld van een burst uitzending met de hoogste instelling van het uitgangsvermogen van de zender indien een vorm van Transmitter Power Control is geïmplementeerd. Het zendvermogen wordt met TPC...

muetzekoeln

Will ROS v7 sport a IPv6-Ready logo from the beginning?

https://www.ipv6ready.org

muetzekoeln

# echo 1 > /proc/sys/net/ipv4/icmp_errors_use_inbound_ifaddr

+1 to make this an configurable option!

muetzekoeln

If "disconnect some user" involves an interface going down, this is normal while using masquerade or dynamic routing protocols.

See also
viewtopic.php?t=117958

Have a look where your CPU cycles are used with profiler tool of ROS.

muetzekoeln

This is only about naming conventions! https://support.metageek.com/hc/en-us/articles/203532644-802-11ac-Channels Mikrotik does not use the AC channel naming but gives you control where your 20MHz control channel is positioned. E.g.: AC 160Mhz "channel" 50 can be set on Mikrotik by specify...

muetzekoeln

... please provide recommended Firewall filter rules.

Please see also:
viewtopic.php?f=2&t=149425&hilit=CVE+2019+11477#p735645

muetzekoeln

Could the new LtAP be used as GPS-based stratum-1 NTP server? I know previous devices didn't support 1PPS but perhaps you did route that one additional signal from the GPS module to CPU GPIO this time? Or do we still have to use a Raspberry Pi for that? +1 I like this idea. Stratum 1 server by Mikt...

muetzekoeln

Search for topics DFS and Radar detection.

muetzekoeln

Great news! In which version of ROS6? Is that only announcement of the development or some builds are available as of now? Don't get me wrong! I was hopeful when dot1x and ike2 features were released in 6.45beta, that developement of often reqested features was sped up. So I brought up my favorites...

muetzekoeln

Some postings in this forum suggest, that VLAN-ID of 1 is used internally by ROS as the default when no VLAN-ID is set. Setting VLAN-ID=0 is nowhere allowed (as far as I know) in ROS. I would like a different aproach: Make VLAN-ID of 0 the internal default when no VLAN-ID is set and allow for settin...

muetzekoeln

Ah you have also been looking for it

Indeed. And I must admit, that I did not try sebastias suggestion: viewtopic.php?f=13&t=143940&p=708698#p708634
Maybe we should start a formal feature request, so that it has a chance for ROSv7

muetzekoeln

Often asked or requested, e.g.:

viewtopic.php?f=2&t=145248&p=714929#p714929

viewtopic.php?f=13&t=143940&p=708698#p708698

muetzekoeln

Yes. See here: https://forum.mikrotik.com/viewtopic.php?f=21&t=142967&p=704556#p704556 Can you provide a link to these phase coupling devices as an example? https://www.eichhoff.de/produktuebersicht/plc/phasenkoppler https://www.allnet.de/en/allnet-brand/produkte/powerline/powerline-zubehoe...

muetzekoeln

aren't there a special devices to overcome these automatic fuses problem?

Yes. See here:
viewtopic.php?f=21&t=142967&p=704556#p704556

muetzekoeln

I have connected two appartements by POTS (plain old telephone system) wires using a pair of G.HN modems giving about 500Mbit/s combined up+down. Formerly I used a pair of VDSL modems for this giving 100/100 with profile 30a.

Unfortunately none of this hardware is made by MT.

muetzekoeln

What task do you have for your s10 for about 1Gbps?

ax is not only about higher peak thruput. It will give you improved coverage and less interference in crowded environments. And there is more, e.g. lower latency.

muetzekoeln

+1 for NS records in DNS static cache, but also I would like to have SVR records there.

muetzekoeln

Why use SSID for this? This may bring compatibilty problems. Wouldn't a preferred list of AP's (e.g. by address instead of SSID) on the client alone help with your issues? So no change on the AP side necessary.

muetzekoeln

Mikrotik had a GPON/ONU SFP module, to make any Mikrotik device with SFP slot an ONU:
https://mikrotik.com/product/SFPONU

It is discontinued. Don't know why.

muetzekoeln

It would be really nice to add NAT66 support for IPv6 ...

+1

I am dual-homed residential customer and both my ISPs support IPv6.

muetzekoeln

Dear Mikrotik, what about automatic sertificates from Let's Encrypt?

Someone wrote a lightweight ACMEv2 client in C:
https://github.com/ndilieto/uacme

So it should be possible to implement as ROS package.

muetzekoeln

https://mikrotik.com/download/archive

muetzekoeln

+1

viewtopic.php?f=1&t=45934&p=714953#p714953
viewtopic.php?f=1&t=45934&p=727173#p727173

muetzekoeln

I would like to have an option to select and enable DFS (in the variants ETSI, FCC and JP) when using 5GHz superchannel/no_country_set setting.

muetzekoeln

Maybe you can learn about problems from this thread or contact it's poster:

viewtopic.php?f=7&t=146457

muetzekoeln

If not already done, try "cts-to-self" or "rts-cts" hw-protection-mode. Well, this was too quick. You can try if enabling RTS/CTS on your ROS APs helps, but most of all, you should try to enable it on your Motorola devices. Also, when enabling RTS/CTS you have to specify a minim...

muetzekoeln

When improving PPPoE, please look also into RFC4938. The link metrics extensions make sense with wireless links as well as with DSL, where bandwidth can change for an up-state interface. PADQ information could be applied to QoS/queue parameters if made available by PPP event scripts (new events nece...

muetzekoeln

Maybe you would like to suggest an improved ping client and server to Mikrotik as a feature request. Like here: https://forum.mikrotik.com/viewtopic.php?t=20448 https://forum.mikrotik.com/viewtopic.php?t=110083 Feature request for improved time sync are already there. E.g.: https://forum.mikrotik.co...

muetzekoeln

Can PPP event scripts be used for adding/deleting entries in DynDNS like services? I have my own domain name from Strato.de and a DynDNS service came with it. I would like up/down events of my PPPoE WAN uplink to trigger ROS-scripts for registering the current public ipv4 address to this service (AP...

muetzekoeln

With this configuration, ping times to the local gateway IP are better than before, but still not great. Sorry, I just read your thread. Little late I guess.... I think you still have some interference between your APs, but you also may have a severe hidden node problem: https://en.wikipedia.org/wi...

muetzekoeln

When both parties support type 13 ICMP echo request it can be done. But as mkx pointed out clocks of both parties should be in good sync.

See also:
http://www.networksorcery.com/enp/proto ... /msg13.htm

muetzekoeln

They would have to invent an ISO-protocol stack with CLNS, ISO addressing and all that in order to make it work. There are no such implementations for Linux, so they would have to engineer it from the bottom. There now is a Linux implementation of IS-IS (and multithreaded BGP) and it was suggested ...

muetzekoeln

Since lately there is some developement in ROS6 features regarding long awaited features, I would like to bump this ones: - dot11k/r/v based roaming / AP steering in CAPsManager - dot11k/r/v based band steering (also without CAPsManager) - option for airtime fairness Also from other threads: - suppo...

muetzekoeln

Version 6.45beta31 has been released.

*) wireless - improved wireless country settings for EU countries;

Please explain!

muetzekoeln

+1 for WPA3
and EAP-PWD (RFC5931) for WPA2 would be very useful also.

Of course both with the latest patches against dragonblood attack.

OpenWRT has both, implemented in software!

muetzekoeln

IEEE1588 and SyncE would be great, but requires specific support in hardware level IEEE1588 works without hardware support, but performance is not so good. It even works over WLAN: https://www.researchgate.net/profile/Wu_Chen9/publication/276305251_An_implementation_of_IEEE_1588_protocol_for_IEEE_8...

muetzekoeln

+1

viewtopic.php?t=127742#p629568
viewtopic.php?t=59720

muetzekoeln

Dear Mikrotik, what about automatic sertificates from Let's Encrypt?

+1 again

viewtopic.php?t=92673

muetzekoeln

+1 for EFM and other features for carrier ethernet

viewtopic.php?t=92278
viewtopic.php?t=146191#p719993

muetzekoeln

Any updates about e-vpn for kernel v7 on mikrotik?

Don't ask on april fool's day!

muetzekoeln

Please read this thread:

viewtopic.php?f=7&t=142154

muetzekoeln

That is not DMZ. That is just forwarding.
DMZ by definition should be separated from LAN.

Right. But "normal routers" concept of "DMZ" is really nothing different than an "exposed host".

muetzekoeln

Is Priority ... range 0-7?

To me it looks like any other label. Any string seems to be allowed. I already asked the forum about it:
viewtopic.php?f=13&t=142252&p=701712#p701712

muetzekoeln

Can pw48v-12v150w power supply charge external batteries ? For charging batteries, supplied voltage must be higher than battery nominal voltage. For 48V lead-acid batteries this is about 54V (at room temperature). Don't know about voltage output of "pw48v-12v150w". Charging other battery ...

muetzekoeln

... maybe one or two OS updates and eventually one firmware update for the routerboard ...

Try to downgrade.

muetzekoeln

Can we get standard 802.11s support? +1 802.11s would be useful to mesh for example with OpenWRT based devices (some of which may be routerboards ;-) But to mesh RouterOS with coming commercial devices it would need Wi-Fi EasyMesh: https://www.wi-fi.org/discover-wi-fi/wi-fi-easymesh Please implemen...

muetzekoeln

You really should build a ring topology by connecting the last cottage switch back to the router. This way you have some redundancy for your "backbone". Of course you have to run some kind of dynamic routing protocol to make good use of it and prevent loops. For layer 2 infrastructure this...

muetzekoeln

configure device as a HUB

A hub is a multiport repeater working on layer 1. It will span a big collision domain. If THIS is needed for what reason ever, you cannot use any switch/bridge (layer 2) device.

muetzekoeln

Ethernet over 1,5km? The big cost of fiber optic access is not the fiber and fiber hardware. Civil engineering is the most expensive, so why copper laying on the ground? I wished Mikrotik had jumped the G.hn bandwagon for power-line as well as long-reach ethernet. So already installed wires (power-...

muetzekoeln

About "GPEN": do Mikrotik has plans for OAM like 802.1ag or ITU-T Y.1731?

OAM would also be useful if you once build a PWR-Line with Ethernet (instead of USB) connectivity to manage powerline modem.
OAM-Winbox would also be great

muetzekoeln

You are welcome.

I think it's some weird case of inrush currents detected by the HEX.

muetzekoeln

For your "overload" problem: if you are using a short ethernet cable, try using a longer one, eg 10m. This helped me to power a hAP AC by a HEX POE. It will "flicker" a few times thou before it is stable.

muetzekoeln

It would be useful to have link-up and link-down event scripts for PPPoE client. And please make "message" from Authenticate-Ack and Authenticate-Nak available for parsing. Some carriers communicate DSL connection speed by using Authenticate-Ack message [PAP AuthAck id=0x1 "SRU=upload...

muetzekoeln

I already tried to find out how to do this (to send priority-only frames). Maybe it's not implemented.
Would be worth a feature-request. Strange VLAN-ID=1 problems may also be addressed with this change.

muetzekoeln

I never heard of Bequant. But googling for a clue I found this: http://www.ecs.umass.edu/ece/wolf/pubs/comcom2009.pdf But I don't know the connection to their patented algorithm. https://worldwide.espacenet.com/publicationDetails/biblio?CC=EP&NR=3135009&KC=&locale=en_EP With this feature...

muetzekoeln

This link may help inform........... https://en.wikipedia.org/wiki/HTTP/3 Also worth reading: https://calendar.perfplanet.com/2018/quic-and-http-3-too-big-to-fail/ https://datatracker.ietf.org/meeting/100/materials/slides-100-mptcp-a-proactive-approach-to-avoid-performance-degradation-of-mptcp-00

muetzekoeln

Quic is coming!!

Really? Can someone share how much of their current traffic is QUIC, please?
I have the impression, that QUIC was feeler by google and will soon be repaced by BBR with TCP-TLS.

muetzekoeln

Anyway management interfaces, be it Winbox, APIs, ssh, web and whatnot should never be exposed without proper filtering.

You are right with this statement, but impacts of the latest ROS vulnerability show this ideal is not the real world.

muetzekoeln

Please remove OS version from telnet. It is not needed. +1 I too plead for data stinginess. Only disclose data when/where needed. This is the same thinking as a default deny-all rule in firewalls. For me the ROS version is of no value at login prompt. And MT did not explain why they broadcast ROS v...

muetzekoeln

RouterOS includes limited (S)NTP support for syncing clocks. For many applications (e.g. in telecoms and industry) more time precision is required. Protocol IEEE 1588-2008 (aka PTP, IEEE1588v2) is used for this. It would be a great benefit if Mikrotik devices would support IEEE 1588 and function as ...

muetzekoeln

What about the lastest 6.44beta. Something different in the beacon?

muetzekoeln

Since many AccessPoints have it and some devices are dependent on it, it maybe worth a feature request. Mikrotik please add 802.11d support in ROS. It would be great to have country-code and allowed-rf-power in the beacon. Of course there should be an option to disable one or both. Also it would be ...

muetzekoeln

In "queue tree" please provide the option of specifying limit-at and max-limit as a percentage of the limit on the next higher layer. When the value of the limit in the parent item changes, automatically re-calculate the values specified by percentage. +1 Yes please, this is very useful!

muetzekoeln

Its been in there for years. Go into your access control list under wireless. You can generate/set per Mac address passwords. /interface wireless access-list add comment=Jayden mac-address=5C:1D:D9:C3:C6:15 private-pre-shared-key=supersecretpasswordexample vlan-mode=no-tag Is this the same as EAP-P...

muetzekoeln

+1 for RFC5216 support

muetzekoeln

I have some devices in my LAN which ignore VLAN-tagged frames. With some luck they accept priority-only tagged frames. For checking I need to source such frames with my MT devices. Parts of my home LAN are connected by two remote bridges (unmanaged). These have QoS built it, but based on 802.1p only...

muetzekoeln

set-priority action & ingress-priority property How_to_set_priority OK, in bridge filter: "0" is allowed for VLAN-ID. I didn't know that. But please give me example configuration commands. I simply want to have all Ethernet ports in one bridge. No VLAN's, just one big broadcast domain...

muetzekoeln

Yes, I found this. But how are packets with VLAN-ID of 0 are processed then? It is not possible to set PVID or VLAN to "0".
And how to send prority-only tagged frames with ROS?

muetzekoeln

How to configure RouterOS (I have RB960, RB962) to make use of priority-only tagged Ethernet frames? Just to transport priority information, when IP DSCP/ToS cannot be used. It is common practice to use VLAN-ID 0 for this, although not specified in the 802.* standards as I recall. Is is possible? If...

muetzekoeln

+1 for RTSP2 2.0 (RFC 7826) ALG and/or proxy server in ROS.

muetzekoeln

No, it's not "must", it is "shall".

But if you do TPC you are allowed higher max RF power on certain channels.

muetzekoeln

There are only four 5GHz channels without enforced DFS by most regulatories:
36 (5180MHz)
40 (5200MHz)
44 (5220MHz)
48 (5240MHz)

muetzekoeln

I am powering a hAP AC from a Cisco SG250 (SG250-08HP). Works like a charm, although it should not work by the datasheet.

muetzekoeln

perform better between outlets on different phases if wires of both phases leading to utilized outlets parallel to each other for a few metres. Obviously inter-wire crosstalk is high enough and magnetic circuit breaker's attenuation big enough to make this difference. Same phenomenon helps better P...

muetzekoeln

They push us to not using "czech_republic" settings, if we wants to be comply with our laws rules. That's not true. Please read this thread carefully. The next Beta release will have indoor/outdoor option, so I guess the next stable release for your production environment will have it too...

muetzekoeln

KidControl doesn’t work with IPv6

Well, RouterOS Version 6.44beta50 added IPv6 for KidControl and I am quite happy about this.
Let's hope that means, that IPv6 will be better supported in the rest of RouterOS in the near future ....

muetzekoeln

It would be nice to have zero-wait DFS in RouterOS, like AVM and Aerohive have it. This is to eliminate wait time on 5GHz band after changing operational channel because of Radar detection. RouterOS could do continuous background scanning (using Scanlist) to find "available" and "unav...

muetzekoeln

authorities about DFS detection thresholds I found some interesting information about this: https://mentor.ieee.org/802.18/dcn/08/18-08-0016-00-0000-eu-dfs-update-march2008.ppt https://www.nts.com/resources/Dynamic%20Frequency%20Selection%20and%20the%205GHz%20Unlicensed%20Band.pdf https://mentor.ie...

muetzekoeln

How does RouterOS handle DFS radar detections? Is there something like "zero wait DFS" (https://avm.de/fritz-labor/fritz-labor-fuer-fritzbox-6590-cable/neues-verbesserungen/zero-wait-dfs/)? RouterOS could do continuous background scanning to find "available" and "unavailable...

muetzekoeln

cannot use 5480MHz, why? This would be channel 96. You can ask the same for channel 32 (5160MHz). At least with 20MHz bandwidth and OFDM it should be allowed to use. But this two channels are not selectable with any equipment I know. And the only webpage I found which lists them as allowed for Euro...

muetzekoeln

This is requested by users for many years:

viewtopic.php?f=19&t=86271

muetzekoeln

I would prefer to see CPU frequency always in MHz, even if higher than 1000MHz.

Two variants of RB4011 are specified 1400MHz resp. 1.4GHz.

muetzekoeln

Nice one!

I am missing "hEX PoE", product code RB960PGS.

An additional column with products codes would also be nice. They appear in the mouse-over URL on the product names, but you cannot search or sort by product code.

muetzekoeln

https://i.mt.lv/cdn/rb_files/PWR-line-ap-181210094027.pdf This is a joke, right? You ask for my comments? Here you are.... This is the most ugly and obsolete device I've ever seen! You can buy WiFi single band wall warts since more than 10 years! Everyone who wants to have such a thing, already bou...

muetzekoeln

Most dowload traffic today is encrypted. So there is no way for caching without breaking encryption, like MITM.

muetzekoeln

- a mptcp enabled kernel +1, although it's status is "experimental". Would also play nicely together with LISP (RFC6830) https://forum.mikrotik.com/viewtopic.php?f=19&t=81674&p=699943&hilit=RFC6830#p699943 . In addition BBR is included in mptcp, which would be great. BBR toget...

muetzekoeln

Priority has range 0..7, DSCP 0..63. This isn't matching! Well, in Winbox it seems that ingress_priority has a range of 0..63 and packet priority looks like a text field (so no numeric range) I just found out... I guess setting priority "from ingress" copies DSCP value. But what if 802.1q...

muetzekoeln

Please support preference field in IPv6 router advertisements. Incoming and outgoing. RFC 4191.

muetzekoeln

Bump.

Normis? Can you give me/us insights?

muetzekoeln

Could someone please elaborate on "ingress priority". I have read RouterOS manual, but it became not clear to me. It seems clear, that "ingress priority" can be from 802.11 WMM or alternatively from 802.1q VLAN tags. But if these are missing, will higher level protocol priorities...

muetzekoeln

I have a small feature request. For me it would be very helpful. There are some (about 35) IP networks better reachable by a special gateway than by default gateway (no BGP!). It would be great if there would be an address list table where all these networks listet and add only one ip route for the ...

muetzekoeln

"/tool speed-test"

No iperf??

muetzekoeln

What are you doing that double PAT is becoming a problem? I am afraid it will break SIP and/or give problems with online gaming. ... you need to use NAT so you get a third different net on your side. This will give you double NAT What about doing srcnat-netmap from LAN to CPEs and put sfp1 and ethe...

muetzekoeln

I already read many threads and manual pages, but I am stuck with one very special problem. Given are two independent DSL lines, each with a router (=CPE) I have no control over. Each CPE has one public IPv4 address and one private network (each) (10.0.0.254/24 resp. 192.168.0.254/24) for me to use....

muetzekoeln

Locator Id Separation (LISP) support

RFC6830-6836, please!

muetzekoeln

I know it's an old thread. But I would like to know about the status of using webproxy with IPv6.
Was the missing DNS AAAA resolution a bug? Is it fixed with the latest ROS versions?

muetzekoeln

+1
Fritzbox devices tunnel their guest account by l2tpv3.

muetzekoeln

+1
it just makes sense!

muetzekoeln

It would also be nice to have a power supply (24V/48V DC) with builtin power-line communications bridge. So to connect any MT device (Router, Switch, AP, ...) to this network. It would have two connectors: DC out and Ethernet. Just swap the orginal power supply against this new one and connect the a...

muetzekoeln

Well, it would make sense if it would use G.hn for power-line communications and 5 GHz WiFi. So you could place one in each room and not having too much interference, especially when the device will have low gain antennas (less disturbance from other WiFi signals).

muetzekoeln

RouterOS marks each packet internally with a priority mark. But it lacks useful usage of it. Please improve! Examples: In firewall mangle rules there is a priority selection, but only for a single value. I would like to input a list of values. In queue trees there is only filter for packet marks. I ...

muetzekoeln

I will answer this myself as I bought this Cisco router:
Yes it works like a charm! Plug-and-Play although there is no "force four pair" option.

It works even better than with my HEX PoE. No overloads when using very short patch cables.

muetzekoeln

+1

All my Kodi-boxes (based on libreelec) and my AVM FritzBox router do have iperf on board. No way to use BTest on them.

muetzekoeln

+1

plus "band steering" and "airtime fairness".

Please, it's about time!

muetzekoeln

Before buying, I would like to know if powering a HAP AC from a Cisco SG250 series switch (e.g. SG250-08HP) by PoE will work.
Anyone here with real world experience?

I know HAP AC cannot do 802.3at/af, but has a "Force Four Pair" setting for PoE ports.

muetzekoeln

+1 for native RouterOS package

with no virtual OpenWRT instance or Linux-System requirement, please!

Search found 167 matches