Hello, I have updated my 2 home devices from 6.45.1 - Hex S and cAP ac. There is no problem with Hex S, but cAP ac has rebooted several times since then: Router was rebooted without proper shutdown by watchdog timer. According to dude, these reboots occurred seemingly at random intervals (20, 6, 7.5...

How much space is used up on your SD card (assuming you have it configured)? My gut tells me that it's not even going to reach 1GB, but I want to be sure. It depends on how many devices you would like to monitor. For example, I have 8 GB card in my hEX S at home and it is being reported as 7.5 GiB ...

RB760iGS has usb and MicroSD card slots, which you can populate with storage. Then you can set User manager to use SD or flash drive to store data and free some space on internal drive (https://wiki.mikrotik.com/wiki/Manual:System/Disks#User_manager_database_path_configuration_example). I use RB760i...

You have 2 options: 1 - Hairpin NAT (https://wiki.mikrotik.com/wiki/Hairpin_NAT) - basically, it would translate external address to internal address of the server when accessed from internal network. 2 - Use static DNS in router so that the domain name will resolve to internal address when called f...

Hello, I've just tested to both IPv4 and IPv6 addresses from one of my RB2011 (Slovakia, Central Europe) on ROS 6.45.11 and both worked great, Thank you! On IPv4 I've got approximately 75/65Mbps and IPv6 was even 95/85Mbps (UDP both way). Those speeds are good enough for the installation site, but I...

It should not be necessary, as Winbox (Mikrotik configuration software) features "Safe mode", see https://wiki.mikrotik.com/wiki/Manual:Console#Safe_Mode (manual is about Console, but it is the same in Winbox also). But according to https://forum.mikrotik.com/viewtopic.php?t=81925 it shoul...

Did you have a look at https://mikrotik.com/product/CCR1036-8G ... estresults ?
According to test results, it can handle it under certain circumstances. With packet size of 1400 bytes, it should not be a problem, but packet size in real conditions depends on your scenario.

Not a bad idea, but to get even smaller idle data size, another idea: Use scripting+scheduler to try to connect to special TCP port on your router (using telnet). If this fails, do nothing - only data sent is SYN request, just a few bytes. When you want remote router to dial in, simply open this po...

You could _make_ yout own dial ondemmand. You could make a script in remote Mikrotik to send HTTP GET request and based on the result you could enable tunnel interface (and thus dial the tunnel). Then you would have to schedule that script to run every hour or so and voila :) What I don't know is ex...

chain=dstnat action=dst-nat to-addresses=10.100.200.99 to-ports=1194 protocol=udp dst-address-list=XXX.XX.XX.XX dst-port=1194 Change dst-address-list to dst-address if you changed address list name to your address: chain=dstnat action=dst-nat to-addresses=10.100.200.99 to-ports=1194 protocol=udp ds...

Is cAP ac considered SOHO device? It has mode button when used with circle enclosure (the square one covers it with solid plastic so it is not push-able).
hEX S also has mode button, but it doesn't have wifi.

Out of curiosity: What is your use case for multiple mode buttons?

A tab with dual power supply possibility would be nice ... There is column named "Number of DC inputs". However some kind of filter would be nice - lets say that I have power PoE device that supplies 24 V, so I want to filter devices by PoE and input voltage. You have a little bug in valu...

/ip firewall filter add action=fasttrack-connection chain=forward connection-state=established,related dst-port=XXXX protocol=tcp comment="Cam port" Are you sure that your IP cameras use TCP? Almost all should use UDP for video transfer. You could check it by using packet snifer for a bri...

what is the order of your firewall rules? If this is the first rule (or anywhere before accept related, established in input chain), then for example when your router tries to connect to mikrotik update server in Latvia, the server reply would be blocked by this rule. So make sure, you have correct ...

On WAN interface, you must set an address from same subnet as LHGs and set up correct gateway (to be able to use internet). If DHCP is used on WAN side, just enable DHCP client for ether1 interface. If not, set up address manually - for example 192.168.88.4 should work (if not used by some other dev...

I'm not sure if cAP ac was designed to run Dude. However, I'm positive that hEX S was designed and will run it. (microSD card can be used to store dude data). x86 image is package meant to be installed within Mikrotik CHR (https://wiki.mikrotik.com/wiki/Manual:CHR), that is virtual machine with Rout...

Your DHCP server is running most probably and giving out addresses.
Disable it.

i also tried to accept all forwarding from the dst-port xxxx but still doesn't work. You dont have to accept all forwards from/to the dst-port. Better way is to enable all forwards with connection nat state dstnat - add new rule with following parameters: chain=forward, connection state=new, connec...

updated Hex S from 6.43.2 and cAP ac from 6.43 including firmware and everything seems to be working.

will 1 cAP be detected in the nearby rooms (in case of we buy half of them first)? As said in previous posts, I currently have 2 RB2011 and 1 RB3011. Is a 2011 capable of handling 58 APs + Phones with VLANs without problem (except a user trying to make some) ? I have cAP ac at home in wooden closet...

Hi, change action in radio provisioning from "create dynamic enabled" to "create enabled". This way it will not change the interface name when you provision cap and you can also rename them to whatever you like. (see https://wiki.mikrotik.com/wiki/Manual:CAPsMAN#Radio_Provisionin...

This is done with address list. Takes 5-10 Minutes to check out the IP of the web servers. And I am lucky no change of IP address on those services for 6 months and it runs rather well. You don't have to check IP addresses of given sites - you can use DNS name in in address lists - see https://wiki...

If your children are conecting via wifi only (not cable connection), then the same can be achieved without the need for separate network.
You can use wireless access list, see https://wiki.mikrotik.com/wiki/Manual:I ... ccess_List

Can anyone log to an older version of Mikrotik, through WinBox 3.18 ?

I just logged to 6.42.6 via Winbox 3.18.

I'm starting to think that the only reason for RB4011 to have that SFP+ is that MT can claim it offers "1733 Mbps data rate" (see top most banner on all forum pages). One could hardly claim that if all wired ports were 1Gbps. That is related to wifi performance as it has 4 chains for 5GHz...

I would expect an IP conflict - when your router assigne the same ip to a device as you assigned to your hAP Lite.

Try to connect to it via winbox by MAC address (you can find MAC address on a sticker somewhere on you hAP Lite).