Community discussions

MikroTik App

Search found 29 matches

by humbfig
Tue Sep 22, 2020 5:57 pm
Forum: General
Topic: Weird IPTV problem
Replies: 3
Views: 494

Re: Weird IPTV problem

I assume by "if I connect to a VPN (usually my workplace)" you mean that you're at home and connect to the workplace using the VPN, which redirects all connections of your PC, including the internet ones, via the workplace network. If so, I can imagine two possibilities: an MTU issue, whi...
by humbfig
Fri Sep 18, 2020 10:06 pm
Forum: General
Topic: Weird IPTV problem
Replies: 3
Views: 494

Weird IPTV problem

I have a subscription of F1TV. At home, with my MT router, I can't start the stream. I access the site, I press play, I wait a few moments and I get the previous page again, where I'm expected to press play. If I connect to a VPN (usually my workplace), I can start the stream with no issue. After th...
by humbfig
Fri Jan 10, 2020 12:38 am
Forum: Beginner Basics
Topic: Invalid user/pass after reset
Replies: 16
Views: 2232

Re: Invalid user/pass after reset

Ok Oddly, I had no problem to login to the 260..... this time it didn't even ask for a password. As soon as I connected, I was in the switch...... :shock: So, right now, only one question pops on my mind. I've had 2 260GSP for more than a year. I'm using them as dumb switches. My configuration conce...
by humbfig
Wed Jan 08, 2020 1:21 am
Forum: Beginner Basics
Topic: Invalid user/pass after reset
Replies: 16
Views: 2232

Re: Invalid user/pass after reset

I do have two more, a hap AC and another 260GSP. If I could get access with mac-telnet, what would I do?
Short celebration...
:lol:
by humbfig
Wed Jan 08, 2020 1:20 am
Forum: Beginner Basics
Topic: Invalid user/pass after reset
Replies: 16
Views: 2232

Re: Invalid user/pass after reset

No, something does not sound right here, especially if you say you had the same problem recently on a 260 I could not agree more... Me too!!!! Now, I have recovered my previous working LAN setup. I'm on full fibre network and I still have a wife and kid. If you are curious to understand what the he...
by humbfig
Tue Jan 07, 2020 10:07 pm
Forum: Beginner Basics
Topic: Invalid user/pass after reset
Replies: 16
Views: 2232

Re: Invalid user/pass after reset

No, something does not sound right here, especially if you say you had the same problem recently on a 260, which runs switchos and not ros. Make sure basics are correct, i.e. 1. Your reset procedure is correct 2. Your CAPS lock is not on, etc. 3. You are trying to access the correct device, 4. etc ...
by humbfig
Tue Jan 07, 2020 9:13 pm
Forum: Beginner Basics
Topic: Invalid user/pass after reset
Replies: 16
Views: 2232

Re: Invalid user/pass after reset

SSH with default credentials (admin/blank). Configuration can be done through cli easily. Browser option sounds possible, does Apple support InPrivcate browsing? Then you can just start an InPrivate tab. admin/blank also does not work in ssh either. Same thing as browser. Invalid user or pass..... ...
by humbfig
Tue Jan 07, 2020 9:02 pm
Forum: Beginner Basics
Topic: Invalid user/pass after reset
Replies: 16
Views: 2232

Re: Invalid user/pass after reset

Crazy idea, have you got any other RouterOS devices? Use Mac-Telnet from that to try and access the HexS. Did you connect the Hex to the web after resetting but before you logged in? May be hacker already gained access? I do have two more, a hap AC and another 260GSP. If I could get access with mac...
by humbfig
Tue Jan 07, 2020 5:53 pm
Forum: Beginner Basics
Topic: Invalid user/pass after reset
Replies: 16
Views: 2232

Re: Invalid user/pass after reset

Before that i would try to login with another computer...
hummm..... you think there might be something wrong with the browser? Some cached thingy?
by humbfig
Tue Jan 07, 2020 5:51 pm
Forum: Beginner Basics
Topic: Invalid user/pass after reset
Replies: 16
Views: 2232

Re: Invalid user/pass after reset

Can you try by using either SSH or Winbox?
I can try tonight the ssh (didn't think of that).
What would be the user/pass? root/blank?
If I can login, what do I do to to regain access to the web-config? (I have never used ssh to mikrotik devices....)
by humbfig
Tue Jan 07, 2020 5:48 pm
Forum: Beginner Basics
Topic: Invalid user/pass after reset
Replies: 16
Views: 2232

Re: Invalid user/pass after reset

Use netinstall...
Before that i would try to login with another computer...
Isn't netinstall a windows thing?
by humbfig
Tue Jan 07, 2020 3:57 am
Forum: Beginner Basics
Topic: Invalid user/pass after reset
Replies: 16
Views: 2232

Invalid user/pass after reset

I can't login to the hexS webpage after a reset. I know the reset went fine because the router GW is now the default 192.168.88.1 I load the webpage, but admin/blank doesn't work, neither the previous admin/pass (long shot, but I had to try!). Can someone help me solve this without running WinBox? I...
by humbfig
Thu Oct 24, 2019 4:03 am
Forum: General
Topic: Using a hap AC as a switch [SOLVED]
Replies: 15
Views: 2600

Re: Using a hap AC as a switch [SOLVED]

As long as you press cancel after that, you are safe. But it's better to learn how to look for those things without entering quickset :) And by the way there are modes that do not have a WAN config: WISP AP, and then Configuration - Mode: Bridge. Well, I tried to start from the WISP AP mode bridge....
by humbfig
Wed Oct 23, 2019 6:30 pm
Forum: General
Topic: Using a hap AC as a switch [SOLVED]
Replies: 15
Views: 2600

Re: Using a hap AC as a switch [SOLVED]

Don’t ever use quickset after you made some changes from initial configuration. What if you don't use it but you check on it, just to know what your programming is "doing"? You find some red fields stating that you must write something. You find some working modes that you don't even know...
by humbfig
Wed Oct 23, 2019 4:00 pm
Forum: General
Topic: Using a hap AC as a switch [SOLVED]
Replies: 15
Views: 2600

Re: Using a hap AC as a switch [SOLVED]

Maybe there is a loop and RSTP disables your ports... Can't see how could there be a loop. Anyway, no ports are disabled. It's just that the port used as wan in the "quickset menu" pops out of the bridge. That kind of makes sense. But I try not to program anything in the quickset menu, ho...
by humbfig
Wed Oct 23, 2019 2:14 am
Forum: General
Topic: Using a hap AC as a switch [SOLVED]
Replies: 15
Views: 2600

Re: Using a hap AC as a switch [SOLVED]

Did you put ether1 inside the bridge too? I guess that is the port that connects you with the main router... DHCP works in layer 2, if you bridged all your ports and connected any of them with your main router it should work without problems... Edit: now i saw you use the sfp port... if it shows di...
by humbfig
Wed Oct 23, 2019 1:21 am
Forum: General
Topic: Using a hap AC as a switch [SOLVED]
Replies: 15
Views: 2600

Re: Using a hap AC as a switch [SOLVED]

You don't need DHCP relay. And remove all firewall at least temporarily.
I removed all filters and the nat masquerade. Tried it with and without the dhcp relay. Still can't get an ip.
I notice the sfp port in the bridge tab was disabled.....
by humbfig
Tue Oct 22, 2019 11:53 pm
Forum: General
Topic: Using a hap AC as a switch [SOLVED]
Replies: 15
Views: 2600

Using a hap AC as a switch [SOLVED]

Hi, I have a home gateway router (hex S) connected to a hap AC to provide wireless network. So far, I've been using the hap AC as a dhcp server with a different subnet from the hex S. The problem is, I need the wifi clients to be in the same network as all the other devices due to dlna, wireless pri...
by humbfig
Fri Sep 06, 2019 3:11 am
Forum: Beginner Basics
Topic: Where do you report a bug?
Replies: 12
Views: 2188

Re: Where do you report a bug?

There is no defined order for assignment of the addresses in a pool. It often starts from lowest but under some conditions it may assign higher addresses. And certainly when a device has had an address before, it will often ask "can I have this address again?" and they router will allow i...
by humbfig
Thu Sep 05, 2019 6:18 pm
Forum: Beginner Basics
Topic: Where do you report a bug?
Replies: 12
Views: 2188

Re: Where do you report a bug?

So the Barman says to the Hap AC, "hey, your IP address should have the CIDR notation, not your subnet mask" Something else, DHCP scope should not include X.x.x.31, that is the broadcast address for /27, and routeros typically assigns IPs from high to low, so maybe you were issued .31 IP ...
by humbfig
Wed Sep 04, 2019 2:12 pm
Forum: Beginner Basics
Topic: Where do you report a bug?
Replies: 12
Views: 2188

Re: Where do you report a bug?

Ok. Fair enough. So, a hap AC with Long Term 6.44.5 and a Macbook OS Mojave walk into a bar.... The hap AC has blank configuration. The Mac is connected to the hap switch. On the quick Set page I put an ip address (xxx.xxx.xxx.1) on the local network. A netmask (255.255.255.192/27) and a dhcp range ...
by humbfig
Wed Sep 04, 2019 2:24 am
Forum: Beginner Basics
Topic: Where do you report a bug?
Replies: 12
Views: 2188

Where do you report a bug?

Hi I believe I found an abnormal behavior in my Mikrotik. The support page in mikrotik.com seems to be interested only in vulnerabilities (not the case!) and kind of makes an effort to deter you from disturbing Mikrotik developers. Anyway, it's still an abnormal behavior and I believe someone up the...
by humbfig
Thu Jun 06, 2019 2:05 pm
Forum: General
Topic: ROS L2TP/IPSec server for OSX Mojave client
Replies: 5
Views: 2501

Re: ROS L2TP/IPSec server for OSX Mojave client

Let's get extended logging going so you can see more info: /system logging add topics=ipsec,!packet Thanks for your answer. I was already thinking this forum needed a secret cool handshake that I don't know... By now I've given up on L2TP/IPSec (also had given up on OpenVPN a few months ago!). I ma...
by humbfig
Fri May 03, 2019 3:11 pm
Forum: General
Topic: Public ip's connected(?) to my hapAC wan
Replies: 4
Views: 651

Re: Public ip's connected(?) to my hapAC wan

192.168.1.0 is, I guess, now in the "network" field associated to the address; what is after the / in the "address" field itself?
Sorry, I don't know what I was thinking when I wrote the previous post. I just edited it.
Thanks for your help!
by humbfig
Thu May 02, 2019 9:32 pm
Forum: General
Topic: Public ip's connected(?) to my hapAC wan
Replies: 4
Views: 651

Re: Public ip's connected(?) to my hapAC wan

You were right.
/ip arp did not show any mac address for this strange ip's and, for some reason, the netmask on the mikrotik wan was 255.0.0.0 (ISP router LAN is 192.168.1.0)
Changed it to 255.255.255.0 and have not yet seen any strange ip show up.
Thanks!
by humbfig
Thu May 02, 2019 2:27 am
Forum: General
Topic: Public ip's connected(?) to my hapAC wan
Replies: 4
Views: 651

Public ip's connected(?) to my hapAC wan

It might just be my less than stellar understanding of networks, but I find it odd that the arp command on my mikrotik router shows, besides all my home devices connected to the bridge interface, connections from public ip's (usually starting with 192, somewhere from Canada and US) on the ether1 int...
by humbfig
Sun Dec 30, 2018 6:59 am
Forum: General
Topic: ROS L2TP/IPSec server for OSX Mojave client
Replies: 5
Views: 2501

Re: ROS L2TP/IPSec server for OSX Mojave client

Let's get extended logging going so you can see more info: /system logging add topics=ipsec,!packet Thanks for your answer. I was already thinking this forum needed a secret cool handshake that I don't know... By now I've given up on L2TP/IPSec (also had given up on OpenVPN a few months ago!). I ma...
by humbfig
Fri Dec 14, 2018 5:05 pm
Forum: General
Topic: ROS L2TP/IPSec server for OSX Mojave client
Replies: 5
Views: 2501

ROS L2TP/IPSec server for OSX Mojave client

Hi I have been trying for 2 weeks to setup a road warrior L2TP/IPSec server on my hap ac (RB962UiGS-5HacT2HnT ; v6.43.7) so I can connect my macbook Mojave (10.14.1). The Mikrotik stands behind my ISP Gateway router, which I can not discard due to a proprietary WAN authentication. Anyway, I'm pretty...
by humbfig
Sat Jul 14, 2018 6:30 am
Forum: General
Topic: ARP/DHCP problems [SOLVED]
Replies: 1
Views: 403

ARP/DHCP problems [SOLVED]

Hi My home LAN has been 192.168.33.0/24 and my NAS has been 192.168.33.11 for some years. A week ago I installed a new hap ac router and configured everything, including ARP, pointing the usual IP addresses to the right MAC Addresses. Everything was working fine until today the Mikrotik decided the ...