MikroTik

markwien

thanks its on auto... /system/routerboard/settings> print auto-upgrade: yes baud-rate: 115200 boot-delay: 2s enter-setup-on: any-key boot-device: nand-if-fail-then-ethernet cpu-frequency: auto boot-protocol: bootp enable-jumper-reset: yes force-backup-booter: no silent-boot: no protected-routerboot:...

markwien

Dear All,

I am actually having issues with a RB1100AHx4. It started having issues and is not working proper.

Only thing i found is that the CPU frequency is changing all the time from 533 MHz - 1000 MHz - 1200 MHz - 1400 MHz

Is this a Feature or is this device on the way to brick or die?

br

Mark

markwien

Solved! everythink was right. Issue was a strange routing table at the nas system i used to reach in my testing.

markwien

Does anyone of u see something i did wrong?

I have a similar setup to a baracuda firewall and not facing that issues....

markwien

Hi Can someone of you see what i am doning wrong? I was able to ping from 10.0.0.1 to 192.168.88.1 and reverse. I was able to access 10.0.0.1 from 192.168.88.1 now it stoped suddenly... something i have wrong i can see Connections in Firewall but they dont connect: SYN.PNG results of my logging: 10....

markwien

Is there any time plan for BFD on 7.5 it’s not working ….

Br
Mark

markwien

THX i upgraded to ros 7 lets see if this helps

markwien

Dear Forum, i am facing a issue that the router is rebooting without any reason. system,error,critical router was rebooted without proper shut down by watchdog timer The Router rebooted itself 3 times in the last 6 weeks. I was not able to see heavy load or power loss. Firmware and Packages is: 6.48...

markwien

Hi i try to fetch all files in /file and copy them to a other mikrotik. When i use the tool in command line it works fine, but inside the script it doesnt. Can someone tell me how to write it correct? /tool fetch url=sftp://XXXXXX/test.txt upload=yes user=backupuser password=XXXXXXsrc-path=test.txt ...

markwien

I have lots of ccr 1036 12 g 2s first version Every unit has minimum one PSU changed. Now I change the capacitors myself even the new psu s with green capacitors blow up in relative short time. Yesterday I took 2 router out of service with blown up capacitors on the routerbord. Will replace them. St...

markwien

Hi

How to set cisco command ipv6 nd ra suppress all in mikrotik?

thx

Mark

markwien

this realease was not able to perform basic layer 1 features. ARP issues - outage. i had to downgrade to 6.47 now all services are back up.

Mikrotik please test your software!!!

markwien

crossover works perfect - MikroTik we need a nativ version ...

markwien

good news to me - i will get a m1 too ...

markwien

Dear All I am getting DSL Subscribers on one Port. Traffic from one DSLAM is tagged with a S VLan Tag like VLAN ID 10 Customer VLANs 4 VLANS per CPE are C VLAN 8,9,10,11 If more clients come on same DSLAM every client gets 4 C VLAN ids within S VLAN Tag 10. If a client comes from an other DSLAM that...

markwien

dear all i am on testing software issue is gone. Till today no issue.

br
Mark

markwien

What's new in 6.47.3 (2020-Sep-01 05:24): *) crs3xx - improved Ethernet port group traffic forwarding for CRS354 devices You shuld all update to latest version and check out if the issue still exists. I was on this version - this version doesn’t fix it ! Made update on saturday to 6.48 Beta 35. let...

markwien

From our observations, those people who had the same issue (as there are other, not related issues in this topic as well), and who wrote to support, their issue has been resolved in the latest RouterOS v6.48 beta version. If you like, you can wait for the same fix when 6.48 comes out in the stable ...

markwien

Has the beta solved the issue ?

markwien

MikroTik please do a statement and solution on this issue - we have switched to ubiquity because we are not willing to have permanent support calls of our clients !

markwien

two of my units (I have around 15pcs totally) are affected with this issue and both are failing on ether1-8, I can confirm that, no any other port show problem... I have similar issue - how often do the port fail ? Can u reproduce it? I get 2 groups failing on my 48 switch but can’t reproduce ... B...

markwien

In my opinion Mikrotik does a good job, but not a great one. We choose their products for the features and the low prices. But what do you do as a network admin when you realise that a 48 port switch installed in a rack, that connects 30 servers, is not working (traffic not passing, flapping ports,...

markwien

I was facing similar throughput issue - I had wrong bridge config. Make sure u use only one bridge and Hardware offload vlan filtering on on bridge.
This I get about 9,8 gbit using xen motion or iperf test (server needs power)

markwien

Hi i have 2 MT Router one is MASTER and one is backup Yesterday i had 5 minutes outage. Here Logfile Router B 58 (BACKUP) BackupRouter-IP58.PNG Here Logfile Router A 57 (MASTER) Master57.PNG First thinking was that the password is wrong - but its the same on both sides. Router A MASTER 57 Config; # ...

markwien

I am against WireGuard - no Hardware offload.
I am used to ipsec that works great. If u need WireGuard better install it on a server with powerful cpu.

markwien

There is one big Feature with MikroTik that’s winbox. I have great experience with ui.com and deployed many sites with it. Some features are great but if it goes to detailed or different configurations it gets complicated. What I suggest to add at MikroTik is: -) nativ winbox for .Mac and Linux -) A...

markwien

I don’t need that feature destination nat rule is fine ... mt is no enduser device like unifi ...(even there much things are complicated to configure)

Br
Mark

markwien

I wonder why people use rare ip space and as number for fun peering ... if u look on the as numbers most of them have long numbers ... I would appreciate if the use those resources for business and clients not for private fun stuff ...

markwien

@markwien, thx for documenting the solution. I'll soon upgrade too. I had to Web Update to the latest testing ros6 and upgrade router os Firmware. After I uploaded ros 7.5 beta via netinstall. So, you updated both RouterOS and the firmware to the latest regular version, and then did a netinstall? I...

markwien

Please enable BGP on ROSv7 as I need VXLAN to peer with 4IXP and EVIX. EOIP doesn't work behind 1:1 nat and gretap is not supported on ROS. Please enable BGP on ROSv7 as VXLAN is the only way to peer with them! Why u need to peer at this points and way I googled but the networks participating are s...

markwien

I made it now work to install the beta. My netinstall issue was that I had to disable all other network interfaces on my pc ... To install beta web update doesn’t work! It gets package not found... I had to Web Update to the latest testing ros6 and upgrade router os Firmware. After I uploaded ros 7....

markwien

I did I know how to netinstall

markwien

Hi I was trying to install ROS 7.5 beta on a hap ac2 using package manager.. Download of packaged started telling some packages are not found - then device rebooted. After I was not able to access the device any more. I tried netinstall many times on several ports (no virus scan firewall etc) even t...

markwien

Yesterday I got feedback from MikroTik on my ticket. They can’t see more than me ... funny the ask if I have serial Console log at time of issue.. this is little disappointing because who does this - we are no testing lab ... Positiv is that the Switch came back to life it self - negativ how often w...

markwien

Sounds either that some process has died, or the filesystem has gone corrupted.

ressources.PNG

how can i check the filesystem or flash ? in disks there is nothing ....

markwien

Do you have an updated Dude server on your network? It may be Dude doing this. not in the network - i have dude running at home on my router monitoring this device... u mean dude is crashing the switch ? i am arrived no in my datacenter and hey switch got rebooted by something - all ok again - now ...

markwien

InkedBild 30.05.20 um 08.00 (003)_LI.jpg my config export looks like: # may/30/2020 08:04:43 by RouterOS 6.45.9 # software id = XGQC-96PW # # model = CRS317-1G-16S+ # serial number = 7A1XXXX #error exporting /interface mesh #error exporting /interface ovpn-client #error exporting /interface bridge ...

markwien

If you do use Splunk as a non root user, you need an external Syslog server. This setup needs Splunk for Mikrotik v3.0 to read field correctly. (out soon) This is how to set it up using Ubuntu server. Should work on most version. rsyslog comes default with Ubuntu so no need to install any extra sof...

markwien

RPKI Origin Validation

Is a urgent must have - otherwise I need to switch to some alternative to keep my perring links up and running ...

markwien

Because of issue with rustelecom urgent call to implement RPKI Origin Validation to ROS 6!

markwien

Push -

markwien

Dear ALL, I have some homeworker i tried to connect to one of our IPSEC router. Homeworker is using a mikrotik behind a Hybrid modem (LTE+DSL) his router gets a NATED IP 10.0.0.0/24 GW is 10.0.0.138. User has dynamic public IPV4 IP. 194.XXX = public IP Homeworker 92.61.XXX VPN Server Static IP I hav...

markwien

I would try to find someone who rent or sell a /22 space and help you to get your own AS number. Also ipv6 Space. With your as number you can buy traffic more easy. U could also get ripe membership and move a space to your own account -(need to find someone selling you space and allow to transfer to...

markwien

you could consider to use several 1 Gbit links... lets say u have a central pop where your core router is located. From there u connect the 1 Gbit pipes. U could balance them using MPLS and OSPF.

br

Mark

markwien

is there some update on conntrack-sync?

like on vyos:

https://docs.vyos.io/en/latest/appendix ... es/ha.html

markwien

i guess i was able to find the bug --> my router at home had some firewall drop rules for some kind of traffic i dont want from WAN like cifs ... after disabling cifs drop it went to normal operation. Stil strange but atm it works great since some hours.

markwien

where are you and your customers located?

markwien

Hey i am facing a strange behaviour on one IPSEC dial in. I am using a mikrotik to connect to my office .. i have several ipsec connections none of them has this issue. Only with my router inside one office. home --> office After connecting to office Ipsec Router i can access to my local subnet 192....

markwien

dear all

i got response from mikrotik support. They currently NOT SUPPORT SwitchOS on this device.

it might never come. its ok to use routerOS for switching... I wish that it get better communicated even quick start manual shipped with the switch is telling how to boot to switchOS...

br

Mark

markwien

Hi Mikrotik I bought a new CRS354-48G-4S+2Q+ and tried to switch to switchos without any success: [admin@MikroTik] > /system swos upgrade error - contact MikroTik support and send a supout file (2) [admin@MikroTik] > /system swos export # mar/12/2020 13:42:11 by RouterOS 6.45.8 # software id = GE9V-...

markwien

Hi out there... I am facing a issue with my IPSEC gateway since this weekend. Users reported slow speed in transfer rates. The user are connected as a client via a EdgerouterX and other clients using a linux box with strongswan. The service was running without headage for around 800 days..... Here m...

markwien

i was thinking today --- found out that when i add peering loopback address in source using trace route tool i can reach the Mikrotik host.

markwien

What kind of Ubiquiti devices are you using ? The icons on your picture don’t match their name...

markwien

Dear Forum, I have 2 Core Routers and one Peering router all connected via OSPF4 to each other and BGP4. Core Router do Full Bgp feed peering router only peering point. I found out that i am unable to update software packages on the peering router - Error Time out. Looking for prefix on peering rout...

markwien

You need to configure EAP AUT passthrough. Use a free radius server for AUT with MSChap.

Its not that complex as it looks like ...
br
mark

markwien

Is this issue solved ? I have same issue - all caps ac are on same channel

markwien

When will the driver come for wave2 ?

markwien

Really? Will this feature come with ros 7 ?
How does features like ikev2 they came earlier in v 6 ....

markwien

Dear Mirkotik Support I bought one CAP AC for testing. Quality is okay but not makes me enthusiastic if i compare it with the brand U* ... I saw that you build in a Qualcomm IPQ-4018 CPU. https://www.qualcomm.com/products/ipq4018 the say there "Wi-Fi Standards 802.11ac Wave 2" Why does it ...

markwien

thank you !!! it works - speedy now ... i was already thinking to replace it with ubiquity

markwien

Edit: why no local forwarding?
I can easily max out 150 Mbit/s downstream with hap ac2 (no capsman) and iPhone 7.

what do mean with no local forwarding?

markwien

Dear all, i saw some post to this topic but the tipps doesn't solve my issue This is my capsman config # aug/04/2018 11:19:49 by RouterOS 6.43rc51 # software id = 4W7W-NJCX # # model = RouterBOARD 3011UiAS # serial number = /caps-man channel add band=2ghz-b/g/n name=2G-Wlan tx-power=18 add band=5ghz...

markwien

Hi mark, I’ve got another thread about this open in the general forum, but did you use a third party ca or your own? I want to use a third party ca and can’t get it to work without installing the intermediate cert on the windows clients. if you did use a third party ca which one? Thanks Martin i ma...

markwien

update, i found out when i disable peering with Hurricane electric .... mikrotik website is working. Does some BGP Guru know how i can solve it? Other Sites connected trough this peer are working. The issue happens on my peering router. On my 2 core router (3 x BGP Full Feed) i reach mikrotik trough...

markwien

i will invite u to drink it with me

i can't believe for what i need 36 cores on tile ....

markwien

[mark@pr1] > tool traceroute upgrade.mikrotik.com # ADDRESS LOSS SENT LAST AVG BEST WORST STD-DEV STATUS 1 193.203.0.185 0% 1 0.2ms 0.2 0.2 0.2 0 2 184.105.65.74 0% 1 12.6ms 12.6 12.6 12.6 0 3 100% 1 timeout 4 100% 1 timeout 5 100% 1 timeout 6 100% 1 timeout 7 0% 1 0ms [mark@pr1] > ping upgrade.mikr...

markwien

yes i can reach the internet [mark@pr1] > ping 8.8.8.8 SEQ HOST SIZE TTL TIME STATUS 0 8.8.8.8 56 123 13ms 1 8.8.8.8 56 123 13ms 2 8.8.8.8 56 123 13ms 3 8.8.8.8 56 123 13ms 4 8.8.8.8 56 123 13ms sent=5 received=5 packet-loss=0% min-rtt=13ms avg-rtt=13ms max-rtt=13ms [mark@pr1] > tool traceroute 8.8....

markwien

Hi i tried to update packages on one of my peering router ...... time out - not reaching update server DNS i use 8.8.8.8 on my all other router its working [mark@pr1] > ping www.mikrotik.com SEQ HOST SIZE TTL TIME STATUS 0 159.148.147.196 timeout 1 159.148.147.196 timeout 2 159.148.147.196 timeout s...

markwien

Yes, EAP pasthrough to external RADIUS is supported.

correct i made it work for me... works with iOS, apple, windows and strongswan. assigning an static ip via radius works too.

markwien

i will open a bottle champagne when Mikrotik support multicore BGP

Search found 70 matches