Community discussions

MUM Europe 2020

Search found 20 matches

by martin3444
Sun Dec 09, 2018 1:12 am
Forum: General
Topic: Allow only one country to access router [SOLVED]
Replies: 3
Views: 732

Allow only one country to access router [SOLVED]

Hello, I've setup a list of IP-s from this site And I've setup a rule: /ip firewall filter chain=input action=drop src-address-list=!CountryIPAllow in-interface=ether1 log=no log-prefix="" What I've intended with this rule: Don't allow connection from anywhere except from "CountryIPAllow" But the pr...
by martin3444
Fri Sep 07, 2018 8:31 pm
Forum: General
Topic: L2TP/IPsec slow download, fast upload
Replies: 21
Views: 2623

Re: L2TP/IPsec slow download, fast upload

4G without VPN bypasses the Mikrotik completely. 4G with VPN mean that the packet comes from the mobile network via WAN encapsulated in l2tp, gets extracted from there and goes to the real destination via the same WAN (or vice versa for the opposite direction). There is no difference at Mikrotik si...
by martin3444
Fri Sep 07, 2018 7:18 pm
Forum: General
Topic: L2TP/IPsec slow download, fast upload
Replies: 21
Views: 2623

Re: L2TP/IPsec slow download, fast upload

You haven't said anything regarding WiFi environment exploration (other devices running nearby on overlapping channels) and if you've really used 4G to connect, the results must be affected as each packet has to go through the WAN interface twice. What country? Maybe someone can have a look? Other ...
by martin3444
Fri Sep 07, 2018 7:05 pm
Forum: General
Topic: L2TP/IPsec slow download, fast upload
Replies: 21
Views: 2623

Re: L2TP/IPsec slow download, fast upload

I've tried absolutely everything. I quit. I'll switch out my router. I don't want to deal with this anymore. I don't get help from anywhere. I even reset my router to default. Nothing helps. MikroTiks wifi doesn't work too. Same as AP. vPN doesn't work. Same as Wifi. I quit.
Bye.
by martin3444
Wed Sep 05, 2018 11:54 pm
Forum: General
Topic: IPv6 and L2TP VPN
Replies: 5
Views: 1823

Re: IPv6 and L2TP VPN

Hi,

Old topic but there is still no answer.
Would like to get it to work too.

Thanks!
by martin3444
Wed Sep 05, 2018 8:28 pm
Forum: General
Topic: L2TP/IPsec slow download, fast upload
Replies: 21
Views: 2623

Re: L2TP/IPsec slow download, fast upload

I tried it in a different computer with wired connection. Download is 110Mbit/s and upload is 120Mbit/s. (VPN enabled)
Don't know what causes this. Tried turning off firewall...doesn't do anything.

On a different laptop without VPN there is again the same problem.
Faster upload than download.
by martin3444
Wed Sep 05, 2018 5:56 pm
Forum: General
Topic: L2TP/IPsec slow download, fast upload
Replies: 21
Views: 2623

Re: L2TP/IPsec slow download, fast upload

Thank you everyone for finding the time to answer.

I tested my vpn with my phones 4G. Connected with vpn and the problem is there too. Download 8Mbit/s and upload 40Mbit/s.

I have no problems if I use 4G only but if I connect via 4G to vpn then speeds are weird.
by martin3444
Tue Sep 04, 2018 9:39 pm
Forum: General
Topic: L2TP/IPsec slow download, fast upload
Replies: 21
Views: 2623

Re: L2TP/IPsec slow download, fast upload

If the issue exists regardless whether you use a TP-link AP or Mikrotik's own AP, it has nothing to do with Mikrotik's wireless. I'd rather vote for the phone's wireless compatibility issues as the phone is the common element in these two cases. From the PC/notebook/laptop you've tried using wifi a...
by martin3444
Tue Sep 04, 2018 9:19 pm
Forum: General
Topic: L2TP/IPsec slow download, fast upload
Replies: 21
Views: 2623

Re: L2TP/IPsec slow download, fast upload

1450 may be too high for the parameters you have chosen, I have not calculated that. You need to make sure there is no fragmentation in the router. The TCP MSS mangle rule helps that (it forces the endpoint to send the proper fragment size). Also try with SHA1 and AES128 to see if that is any diffe...
by martin3444
Mon Sep 03, 2018 10:36 pm
Forum: General
Topic: L2TP/IPsec slow download, fast upload
Replies: 21
Views: 2623

Re: L2TP/IPsec slow download, fast upload

Make sure you have correct MTU settings and a TCP MSS mangle rule! Like this: /ip firewall mangle add action=change-mss chain=forward new-mss=clamp-to-pmtu passthrough=yes \ protocol=tcp tcp-flags=syn Max MTU is 1450, max MRU is 1450. Added this mangle rule, but it didn't change anything. Same prob...
by martin3444
Mon Sep 03, 2018 10:18 pm
Forum: General
Topic: L2TP/IPsec slow download, fast upload
Replies: 21
Views: 2623

Re: L2TP/IPsec slow download, fast upload

If you set use-ipsec in the l2tp settings to yes or required , RouterOS creates a dynamic IPsec peer from an internal template. Instead, you can configure one manually, with phase 1 and phase 2 proposals you prefer, which is what @Companion apparently did. There should be no difference in throughpu...
by martin3444
Mon Sep 03, 2018 8:54 pm
Forum: General
Topic: L2TP/IPsec slow download, fast upload
Replies: 21
Views: 2623

Re: L2TP/IPsec slow download, fast upload

Hello! I also use vpn ipsec. I have no problem. My L2TP configuration is a bit different- / interface l2tp server server set authentication = mschap2 default-profile = vpn_profile ipsec-secret = secret max-mru = 1450 max-mtu = 1450 max-sessions = 2 use-ipsec = NO! What's your ip firewall config? He...
by martin3444
Sun Sep 02, 2018 4:45 pm
Forum: General
Topic: L2TP/IPsec slow download, fast upload
Replies: 21
Views: 2623

Re: L2TP/IPsec slow download, fast upload

Bump
by martin3444
Sun Sep 02, 2018 12:35 am
Forum: General
Topic: L2TP/IPsec slow download, fast upload
Replies: 21
Views: 2623

Re: L2TP/IPsec slow download, fast upload

Anyone?
by martin3444
Fri Aug 31, 2018 11:07 pm
Forum: General
Topic: L2TP/IPsec slow download, fast upload
Replies: 21
Views: 2623

L2TP/IPsec slow download, fast upload

Hello I have a weird problem. I've set up L2TP with IPsec encryption. When I test my VPN throughput then my download is much slower than my upload. Sometimes download is almost equal to the upload. I've been stuck with this in days now. Search is not helping me. http://www.speedtest.net/result/a/42...
by martin3444
Thu Aug 02, 2018 10:08 pm
Forum: Scripting
Topic: Problem running script(s) [SOLVED]
Replies: 6
Views: 796

Re: Problem running script(s) [SOLVED]

New flash drive solved the problem.

Thank you all!
by martin3444
Thu Jul 26, 2018 4:59 pm
Forum: Scripting
Topic: Problem running script(s) [SOLVED]
Replies: 6
Views: 796

Re: Problem running script(s) [SOLVED]

Tried using local instead of global? Not ":global getDateTime" but ":local getDateTime"? If you have few scripts and they all have this function - they overwrite it and maybe it's causing the problem if they are doing it in the same time? +1 Try :do { :local getDateTime do={ :local thisdate [/syste...
by martin3444
Thu Jul 26, 2018 1:57 am
Forum: Scripting
Topic: Problem running script(s) [SOLVED]
Replies: 6
Views: 796

Re: Problem running script(s) [SOLVED]

Tried using local instead of global? Not ":global getDateTime" but ":local getDateTime"? If you have few scripts and they all have this function - they overwrite it and maybe it's causing the problem if they are doing it in the same time? +1 Try :do { :local getDateTime do={ :local thisdate [/syste...
by martin3444
Tue Jul 24, 2018 11:00 pm
Forum: Scripting
Topic: Problem running script(s) [SOLVED]
Replies: 6
Views: 796

Re: Problem running script(s) [SOLVED]

Anyone?
by martin3444
Tue Jul 24, 2018 2:25 am
Forum: Scripting
Topic: Problem running script(s) [SOLVED]
Replies: 6
Views: 796

Problem running script(s) [SOLVED]

Hello, I have quite a weird problem with running my scripts. Problem: I have a script, that basically runs every day at 3AM and takes a backup from my router. It works perfectly fine, but after some time (1 day or more) the script stops working. With error message: script error: action failed (6). I...