Community discussions

MikroTik App

Search found 18 matches

by arisk
Fri Feb 14, 2020 9:17 pm
Forum: Wireless Networking
Topic: Configuring LTE interface problem -- RBwAPR-2nD&R11e-LTE
Replies: 5
Views: 1210

Re: Configuring LTE interface problem -- RBwAPR-2nD&R11e-LTE

It does have a modem inside.. like your first picture.
Suppose that it is faulty indeed? Perhaps customer damaged the device with wrong use of POE or something? It used to work as he says...
by arisk
Fri Feb 14, 2020 5:12 pm
Forum: Wireless Networking
Topic: Configuring LTE interface problem -- RBwAPR-2nD&R11e-LTE
Replies: 5
Views: 1210

Re: Configuring LTE interface problem -- RBwAPR-2nD&R11e-LTE

Hey SiB, thanks for the reply: I got these results: [admin@MikroTik] > /system resource usb print # DEVICE VENDOR NAME SPEED 0 1-0 Linux 3.3.5 ehci_hcd RB400 EHCI 480 [admin@MikroTik] > /port firmware print directory: firmware ignore-directip-modem: no Also there is no trace of lte1 anywhere... And ...
by arisk
Fri Feb 14, 2020 3:42 pm
Forum: Wireless Networking
Topic: Configuring LTE interface problem -- RBwAPR-2nD&R11e-LTE
Replies: 5
Views: 1210

Configuring LTE interface problem -- RBwAPR-2nD&R11e-LTE

Hello everyone, this is the first time i try to configure an LTE interface in order to connect to a cellural ISP. I am using the wAP LTE kit / 4G kit, in which i've inserted a mobile phone SIM card. I also use this article, as a guide. https://stevedischer.com/mikrotik-rbwapr-2ndr11e-lte-us-with-lte...
by arisk
Tue Apr 02, 2019 4:06 pm
Forum: General
Topic: IPsec - set multiple mobile users [SOLVED]
Replies: 5
Views: 926

Re: IPsec - set multiple mobile users [SOLVED]

Emils, it worked thanks to your advice. Finally, I created one peer with four identities. One common proposal, one profile, one policy. I just used different mode configs to implement access restrictions. Thank you very much! For anyone who is interested i leave the configuration below: /ip ipsec po...
by arisk
Mon Apr 01, 2019 7:47 pm
Forum: General
Topic: IPsec - set multiple mobile users [SOLVED]
Replies: 5
Views: 926

Re: IPsec - set multiple mobile users [SOLVED]

So, here i made only 2 peers: remoteUserVPN.peer and remoteAdminVPN.peer . Each one with two identities. One peer uses DHCP for its identities. The other one uses static IP addresses, because i wanted to make different use of "split include" for each identity. Again, first peer is reachable, second ...
by arisk
Mon Apr 01, 2019 6:28 pm
Forum: General
Topic: IPsec - set multiple mobile users [SOLVED]
Replies: 5
Views: 926

Re: IPsec - set multiple mobile users [SOLVED]

I'm sorry! Here are the missing parts: /ip ipsec policy group add name=remoteAdminVPN add name=PapatheodorouVPN add name=KampaniVPN /ip ipsec profile set [ find default=yes ] enc-algorithm=aes-256,aes-192,aes-128,3des add dh-group=modp2048 dpd-interval=disable-dpd enc-algorithm=aes-256 \ hash-algori...
by arisk
Mon Apr 01, 2019 12:47 pm
Forum: General
Topic: IPsec - set multiple mobile users [SOLVED]
Replies: 5
Views: 926

IPsec - set multiple mobile users [SOLVED]

Hello there! I'm trying to set 3 mobile users through IPsec VPN. The strange thing is, that my configuration works like a charm, but only for one peer. To explain further, in the "Peers" tab, the 1st peer is reachable while 2nd and 3rd are unreachable. If i disable the 1st peer, the 2nd one is reach...
by arisk
Fri Feb 08, 2019 2:03 pm
Forum: General
Topic: Vlans - Ping between hosts fails [SOLVED]
Replies: 4
Views: 738

Re: Vlans - Ping between hosts fails [SOLVED]

Problem solved. Thank you so much for your aswers both. Disabling vlan firewall did the thing. Avav, i'm gratefull that you put the time to correct me and advice me in 11 points! I tried to reform my firewall following your advice. Sorry for all the nonsense you saw, this was the first time i set a ...
by arisk
Thu Feb 07, 2019 6:00 pm
Forum: General
Topic: Vlans - Ping between hosts fails [SOLVED]
Replies: 4
Views: 738

Vlans - Ping between hosts fails [SOLVED]

Hello there, i'm not so much experienced in vlans yet.. so i have this problem: When i try to ping from a vlan host to another, it just fails and gives me a "rejected" message. I can't even ping the vlan interface. No one pings no one under the same vlan. It doesn't seem to be any of my firewall rul...
by arisk
Fri Jan 18, 2019 7:08 pm
Forum: General
Topic: IPSEC between Mikrotik router and a Shrew client
Replies: 1
Views: 375

Re: IPSEC between Mikrotik router and a Shrew client

Just in case it matters, all lans under router are virtual...
by arisk
Fri Jan 18, 2019 7:04 pm
Forum: General
Topic: IPSEC between Mikrotik router and a Shrew client
Replies: 1
Views: 375

IPSEC between Mikrotik router and a Shrew client

Hello everyone, Today i set up a RoadWarrior with Mode Conf. I only configured Ipsec and Shrew client, according these wiki pages https://wiki.mikrotik.com/wiki/Manual:IP/IPsec https://wiki.mikrotik.com/wiki/IPSEC_between_Mikrotik_router_and_a_Shrew_client . Tunnel is enabled, i get an IP from pool,...
by arisk
Fri Jan 04, 2019 2:13 pm
Forum: General
Topic: EOIP Queue
Replies: 2
Views: 1347

Re: EOIP Queue

This is a very old thread, however my solution may come in handy to someone. I checked "Use IP Firewall" on Bridge tab, as routerboarda stated above. I chose to have no parent for my simple queue. I set as Target my bridge(eoip tunnel along with a physical interface). I set no Dst.(cause traffic fro...
by arisk
Mon Aug 06, 2018 2:13 pm
Forum: Beginner Basics
Topic: Set vlan interface as DHCP server [SOLVED]
Replies: 12
Views: 4712

Re: Set vlan interface as DHCP server [SOLVED]

Thank you very much for your answers.
Switch did the job.
As for my NIC, it would support VLAN tagging as long as i download Intel's drivers for that purpose.
by arisk
Thu Aug 02, 2018 2:53 am
Forum: Beginner Basics
Topic: Set vlan interface as DHCP server [SOLVED]
Replies: 12
Views: 4712

Re: Set vlan interface as DHCP server [SOLVED]

Good point indeed. In my case it's just practice.. i borrowed the device from work :)
by arisk
Wed Aug 01, 2018 5:19 pm
Forum: Beginner Basics
Topic: Set vlan interface as DHCP server [SOLVED]
Replies: 12
Views: 4712

Re: Set vlan interface as DHCP server [SOLVED]

Thank you both guys!
I'll try the switch. I'll also check my NIC about VLans.
Probably i'll be back with questions.
by arisk
Wed Aug 01, 2018 2:41 pm
Forum: Beginner Basics
Topic: Set vlan interface as DHCP server [SOLVED]
Replies: 12
Views: 4712

Re: Set vlan interface as DHCP server [SOLVED]

Ops.. didn't even know.. may be a silly question but how do i configure vlans on my pc?
by arisk
Wed Aug 01, 2018 2:12 pm
Forum: Beginner Basics
Topic: Set vlan interface as DHCP server [SOLVED]
Replies: 12
Views: 4712

Re: Set vlan interface as DHCP server [SOLVED]

Hello Kurosudo and thanks for your immidiate response. I put 172.17.81.1 in vlan81, deleted my dhcp server configuration and made a new one through DHCP setup button. However nothing changed... my pc doesn't take an IP. I made a DHCP server work that way for a physical port yesterday, but i cannot m...
by arisk
Wed Aug 01, 2018 1:04 pm
Forum: Beginner Basics
Topic: Set vlan interface as DHCP server [SOLVED]
Replies: 12
Views: 4712

Set vlan interface as DHCP server [SOLVED]

Hello everyone, I'm totally new to Mikrotik. I'm practicing with a RB 3011 Routerboard which i've connected to my home router. I've already made a bridge(ports ether1-5) with DHCP relay to my home router which works fine. What i want to do now, is set vlan81 interface as a DHCP server at ether6 and ...