MikroTik

spacex

+1
Cube 60Pro ac bonding stopped working after upgrading 7.12 -> 7.13

Hello, I mentioned the problem above and the same situation happened to me.

spacex

Hello,
Bonding does not work on our Wireless Wire Cube Pro device after 7.13. Those who use this product should be careful. The solution is to disable bonding and add WLAN1 bridge network directly.

spacex

Hello everyone, anyone using wifi wave 2 package on SxtSq AC device?

spacex

Hello to everyone, I reset the Mikrotik LHG device, but netinstall did not come. When I hold it for a little longer for 30 seconds, the signal light is constantly on and the ethernet connection does not work at all and does not give any reaction. My device was working, I wanted to do netinstall to d...

spacex

Haven't you tried this?

spacex

Hello
You can download and test it here.

https://download.mikrotik.com/routeros/ ... 7.1rc4.exe

spacex

Hello,
No APC brand ups, not cin brand ups, there is a program called watchpower.
I can see everything from there.
Can't I connect this Mikrotik?

spacex

Hi,

RB750Gr3 tried to make ups connection via usb but it does not see the usb port RB750Gr3 series does not support ups connection from usb?
https://prnt.sc/wfvqtg

spacex

Is there any traffic right now on the devices?

spacex

I want to say something without forgetting. customers see each other over WLAN.

spacex

Turn off neighbour discovery on the CPE interface, or use a bridge filter to control the MNDP packets.

Hello,
I used this board but there was no solution. Bridge filter firewall is on.
/interface bridge filter
add action=drop chain=input dst-port=5678 ip-protocol=udp mac-protocol=ip

spacex

Hi,
Is this a problem for all users?

spacex

Mikrotik says: please change the key

spacex

What is your country?

spacex

yes i need the same thing too

spacex

Hello,
In versions 6.46 and 6.46.1, Omnitik and LHG series constantly began to receive the error in the photograph and often began to see this problem many times during the day reboot devices

spacex

+1 you are right...

spacex

Hello,
This may be a cable problem or a RJ45 problem.

spacex

https://mikrotik.com/product/lhg_xl_52_ac

spacex

1. I have requested a mod to remove our posts, which are all offtopic. 2. If you want to be helpful, please do not post facts or findings as a question. Describe your issue thoroughly, describe the test you are actually performing with what parameters, what you expect and what you get instead. Mail...

spacex

Posted by spacex — Fri Aug 02, 2019 12:25 am Not fix dude snmp v3 ? Posted by spacex — Sun Aug 04, 2019 2:32 pm Hello, The dude snmp v3 problem not fix ? No, since it is not mentioned in the change log - Please keep this forum topic strictly related to this particular RouterOS release. - no need to...

spacex

Hello,

The dude snmp v3 problem not fix ?

spacex

Hi,
Can you see how many mbit ports the interface side has?

spacex

SNMPv3 still broken in The DUDE....

Omg. I've seen you fixed the beta, and it still doesn't work?

spacex

Imagine this: we have a bunch of SXT. Every SXT is "protected" by a random password, which is linked somehow to the customer database (customer code, or something like that).... This password will only be retrieved if a employee can have access to the ERP from this company. So, if a guy i...

spacex

Hi,
Dude not support mips packet

spacex

It looks like Dude has problems with SNMP access. snmpwalk to other Mikrotik device causes this to appear in log of target device 10:22:24 snmp,debug unsupported v3 security level 10:22:24 snmp,debug v3 err: 0 unsupported security 10:22:24 snmp,debug bad packet and snmpwalk times out. We have Libre...

spacex

Hello there, Hello there, Cpanel 1: 1 nat everything works fine. But the outside attacks and login requests are coming over local ip and when the firewall blocks it, I can't login. Cpanel support said this is a problem with nat how do I fix this problem? Screenshot_1.png I'm sorry for my bad english...

spacex

Hi, For security, we log in to our devices from users created within userman. But: pppoe cpe access will be active in this case because there are only dynamic ip addresses within the userman can add 1 ip to the IP address of the Routers, I can follow what kind of a path to be able to access these dy...

spacex

Well how can I configure it differently.

spacex

I fixed the problem on the PPPoE server. ARP: enable to ARP: Proxy ARP has improved.
Would Proxy-arp be safe?

spacex

You Need to connect the PPPOE Directly to the 2011(client Interface) Internet-> main Router-> PPPOE -> Switch(Clients) RB2011 it's bridge all ports RB3011 bridge ether3(toRB2011),ether5 (torb1100AH) pppoe connected RB1100AH can ping through. The RB3011 does not ping and I cannot access the pppoe ro...

spacex

in short: 3011 by pppoe server can not ping ip and can not connect with winbox.

What can I do to connect?

sorry english is bad

spacex

Hello there, Topology now this way: Untitled Diagram.png I want to do this way: Untitled Diagram (2).png I'm trying to get the pppoe burden on the RB3011. I've installed the pppoe server on the RB1100, I'm connecting to users who have bought the bridge mode, but what can I do if I can't connect to t...

spacex

Test client to ap bandwith test check it.

spacex

nv2 will return to normal when this is normal traffic

spacex

PWR-Line port on hAP

I am wondering too

spacex

The problem was improved by closing the idle vlans.

spacex

Hello there,

Why is there no 60 GHZ wAP tests in the link calculator?

spacex

Is this normal in everyone?

spacex

Hello there, I have RB3011 and 0ms when all the Ethernet ports are pinged, but between 34Ms and 13MS figures, is this normal? Topology: RB3011>>>>>>Centos Radiusmanager(172.16.2.2) no vlan no bridge directly connection Other port: RB3011>>>>>RB2011 switch mod this for vlan Is there any idea?

spacex

I understand you normis

spacex

Hello there, I have a problem with Neighbors. My Network Core Router>RB3011(Vlan150)>>>>RB2011(Vlan151)>>>>Omnitik AC AP1(Vlan150)>>>>Ethernet2 SXTSQHP AP2(Vlan150) All this is in bridge mode and is attached to the vlan bridge. There are 2 APs with their VLAN 150 use tag marked on the wlan. The CPE ...

spacex

could you try changing the protocol to nstreme or nv2 ?

spacex

The Nv2 protocol already has a problem in general. but no one makes any statement about these issues. Will we have to try different brands?

spacex

Hello,

Which protocol do you use?

spacex

I have that same problem

spacex

Have you tried changing the frequency?

spacex

The biggest problem for us is nv2.
Nv2 is a must, so all our devices need to work in mikrotik and noise environments!
Thank you for your answers.

spacex

hello, will nv2 perform any work in mikrotik for bad performance and ping problems?

Everyone complains about this situation, but no one makes a proper statement.

We know it was developed in nv2 arm versions, but will it be developed in other versions?

Sorry my bad English

Have a nice day.

spacex

Up help!

spacex

Hi,
No all port is not working. So I can't try.

spacex

Does anyone have an idea?

spacex

Timing of TDMA depends on distance. Can you use one SXTSQ? Can you transfer some customers? The reason I'm asking this is to control it at a narrower angle.

spacex

Hi,
I have updated the device version but not opened back. Only the PWR lamp is on. ethernet, sfp nothing does not work what can I do?

spacex

how many people are connected to the sector ?
I would recommend splitting 20-25 into 2 people.
tdma time looks very high distances like far away distant

spacex

3 km from all users?
How long can you look at the timer?
Opening for wireless>registration

spacex

Can you ping by doing bandwidth testing by the client?
Change tdma period size:2

spacex

I'm starting to install AP's and Mikrotik CPE and am having that same problem, very high latency from CPE to AP. check below the ping to internal destination of my network the difference of the AP and the CPE connected directly in the same AP CPE: SXTsq lite and Disc lite every new https://i.imgur....

spacex

so the cable was the culprit.

i installed 3 different Mikrotik devices at the tower end of the cable and was facing the same problem and that made me zoom in on the problem.

the cable length is 65 meters.

change the cable finally!!!

Good work

have nice day.

spacex

Did you try to change the cable going to the device? Or I suggest you check your tips.
As far as I can see the link looks 10 mbit.
What is cable distance?
Good luck with.

spacex

link grounding?
the link was working for 2 years in the current setup and suddenly this happened. do you think grounding would do this issue?

Yes of course grounding is very important

spacex

I understand. pfifo is the correct queue type ?
Thank you so much.

spacex

link grounding?

spacex

there is no friend to help

spacex

Hello to everyone, I did a search on the forum, but no good results were found. I have a problem. Queues I have 20 active customers. These are authentic over the radius (DMA). I see some droplets in the mikrotik, and if these values are not normal, I am waiting for your information in a configuratio...

Search found 66 matches