+1 for ZeroTier too

We can’t test it, we removed all Mikrotik P2P

So why do you even bother replying to the post by @ronnie? His question obviously doesn't target you ...

Maybe to express his anger and frustration, peoples like to use forums for that ....

That's a good news Normis!

Lorenzo

All the downloads for the 6.41.3 are not available

No X86 packages yet?
The requested URL /routeros/6.41.3/routeros-x86-6.41.3.npk was not found on this server.

there can be something like '/system routerboard settings set protected-usb-setup=enabled'

+1

It seems that is now supported the new cpu architecture MMIPS, fo the (future?) RB750Gr3.

The MMIPS package wasn't present with the 6.37.1 version.

If you experience any crash at 6.23. Please make support output file after the crash and send it to support (support@mikrotik.com).
It will help us very much!

Just did it.
[Ticket#2014120666000121]

Lorenzo

@maciej

I received this email from the MT support:

"Thank you very much for the report.
We are sorry for any inconvenience caused by this problem.
We are fixing problem right now, it should be fixed right away."

So shoul be fixed in the next hours!


Lorenzo

Submitted Ticket#2014082766000483

+1, tried today

I have to know if this DNS traffic is to your router or to your customer, use the torch tool for investigate.

It seem a "DNS Amplification Attacks", I had one.
In this case just apply some firewall rules.

Lorenzo

Hi,
So i now created a bridge called 'Servers', addes ETH1 and ETH2 to this bridge and assigned an ip address 192.168.16.254 to interface ETH1.

You have to assign the IP address at the BRIDGE interface, not at some port of the bridge!

Lorenzo

BGP origin validation
https://www.ripe.net/lir-services/resou ... validation
This feature is considered.

+1
Fabulous!

Lorenzo

Yes, it works: Netinstall & Putty (using serial cable) in Win7 under Coherence with Parallels.

Lorenzo

Thanks, maybe I'll spring for the Parallels 7 upgrade...

I'm using the new version 8, but all was working fine also in the previous version 7.

Yes, it works: Netinstall & Putty (using serial cable) in Win7 under Coherence with Parallels.

Lorenzo

Never tried. I will try and I'll post the results.

Lorenzo

Parallels is one of the best software I purchased for my Mac, (few) money very well spent.
The Coherence interface, and the integration, is spectacular.

Lorenzo

That sounds like the default config. You can erase that config or set it up however you want. (MAC Server on any interface, rename interfaces, etc) Yes it's the default config, I am quite new about MT. Newer SXT with ROS 5.4 don't ask to remove configuration at first boot, so I need to reconfigure ...

I have found the problem: the latests SXT with ROS 5.4 have the mac server setted only to ethernet instead of all

Other differences found are the interfaces name ether1-local and wlan1-gateway instead of ether1 and wlan1

Giuseppe

Have you tried the five eleven?

Lorenzo

See you in Warsaw, Martin!

Lorenzo

why not here?
maybe MUM in Spanish??

Europe MUM should be in English ......

I think "somewhere in southern Germany" would be nice ......

Lorenzo