https://i.mt.lv/cdn/product_files/LHG-seriesqg_190758.pdf Says: The LHG is an outdoor wireless router with a built-in directional antenna. It can be used as a CPE or for point to point links (use RouterOS wireless mode “bridge” to work as a single-client AP for point to point scenarios). Still looki...

I think /31 might be supported for cisco devices. Anyways considering your example " ISP of x.x.x.31/31 with a gateway of x.x.x.30" -i would try extending the subnet for those two ips to fit inside (and not to fall in broadcast one) to /26 -> 255.255.255.192 -assign the router the ip x.x.x...

as pe1chl said, check all your interface's mac address specially (i guess) the bridge mac address because it can be the same of one of the ports on the same equipment and it seems it makes it to work worse regarding that. on the other half, check if you have a slow link or a WDS one, i had the same ...

Internal antenna 2,5dBi can be used for setups where the distance to the gateway are closer than 1km. I recommend to use an external antenna, the “LoRa Antenna kit” - can be obtained separately. Antenna kit has pole mount and cable ready to use with LoRa cards. https://mikrotik.com/product/lora_ant...

I have already ordered an "antenna kit" to Mexico, the provider said it has a delivery time of 13 weeks, so lets wait to see what happens

Hello, does anyone know if wap 9 lora kit is expected to cover about 1.5 km with internal antena? For, lets say an iot proyect?

Should be with full LoS? Because for example for GPS tracking it might be very poor LoS

Hello all! does somebody know if with two wAP LoRa9 kit is possible to make a slow full bridged IP link trough lora between those two LoRa wAPs?

I saw in a MUM's video from canada called "How using MikroTik Backhaul Solution Innovative designs" the expositor talking about Rx-Sensitivity as a feature but i could locate it in MikroTik, maybe is a new feature for new firmware versions, cause i use long term ones

I am still looking for a way to cover like the LTE network does but using non-licensed frequencies. I'm sorry, im not a radio guy, but someone can advise me about what technology can be used for a project like placing the 3G modems but using unlicensed band? if 900mhz is not so good for non LOS is t...

how can i use testlink for hotspot? (for comparing products as a hotspot)

what can i put on power, rx sensitivity and antena gain considering a mobile device on the other side?

What about :time command?

Im looking for a simple meaning of that message, if is related to a general stop or just something temporarly that was not done on that moment anyway if you want to change radius packets from UDP to TCP it seems not possible by design however you can tunnel then trough a tcp vpn and then you have so...

I dont know how to implement it in mikrotik but knowing a bit of ipsec i think you can establish some ipsec rules to "encript" your ftp ports (for example tcp 21, i dont remember if password data goes trough that one) between your routers Also you can paste your firewall rules from a third...

Thanks to all

please explain for what you need this. With signals weaker then -90 you would not be able to transport anything serious 128kbps using a mobile device would be serious? so why basebox 2 has a receive sensitivity of -100 at 1mbps while metal 52 ac has a receive of -97 if weaker than -90 is useless? T...

Hello, how can i know the receive sensitivity for metal 2 at 1mbps? mikrotik webpage only shows at 6mbps

Hi, i have a setup where i cannot make RB3011's troughput go over 400mbps Something is keeping cpu1 always busy with IRQ calls, and the software workload is also not symmetrical between the cores, making the situation even worse. I have my WAN coming from the SFP port, and flowing into CPU-0, accor...

Folks, Am I right that Winbox (and The Dude server) do NOT sent the password in clear text even if they use plain mode? I tried to Wireshark the traffic and was able to recognize username only. Just want to make sure they send the password in hash or some other secure way even if they use plain mod...

Many thanks

I have experienced that with the firmware that supports fasttrack the big amount of MB are not accounted so i guess is possible to add some fast track rules before your accept rules for your walled garden sites the problem i see with this (to my case) is that it also skips bandwith limitation (just ...

I will try it on lab

try to reset your router

In my case with 6.43.2 dynamic rules from user profile (incoming and outcoming filter) router is placing the rules on the bottom, after the drop rule, so just by sight i think those dynamic rules were never going to hit because the preceding drop is global. Anyways in my case im testing the usage of...

Im just testing and i removed the use of cookie, just left MAC cookie and the behaviour looks like this: -if user disconnects (shutting down WiFi) then, the next time he conects (if cookie is still valid) it will be logged in automatically trough cookie, but if user hits the logout button on hotspot...

Sames happen to my in hap lite SW version 6.42.6 under packages "download & install" or just "download" option no firewall rules for output, i guess is because i have a latency of about 600ms because of the type of internet conection i have, so it creates a round trip time of...

Hello, sorry for this maybe dumb question. I'm thinking in replacing a 15 dbi ombidirectional antena connected lets say to a mikrotik 52 ac (1 wireless channel) as an AP for mobile devices. Disregarding the radiation pattern and angles of coverage wich is obviously different from an omni antenna vs ...

I'm affraid i'm having the same issue, my problem is that i had to activate pool in hotspot because dhcp server was saying it had an invalid configuration and didnt want to activate until i assigned the pool to hotspot, i will try and see if it not deactivates my dhcp server again