Community discussions

MikroTik App

Search found 116 matches

by draid
Mon Jan 15, 2024 1:39 pm
Forum: General
Topic: User poll about using Winbox
Replies: 97
Views: 53198

Re: User poll about using Winbox

Sessions (Layouts) are not bound to the router. You can load some layout on any router, so you should probably name them by Function. not by IP Ok, this is something close to mind that I rly wasn't using (maybe due to autosave on close). It does make much more sense to save them not based on ip. My...
by draid
Mon Jan 15, 2024 12:52 pm
Forum: General
Topic: User poll about using Winbox
Replies: 97
Views: 53198

Re: User poll about using Winbox

1) Have you ever used Sessions? (default ones are <own> and <none> and you can make more) 2) Describe in a few words, what you think they do 3) How could we supercharge this feature to actually be useful for everyone? 4) Does the name Sessions actually convey what this feature is meant to do? 5) Af...
by draid
Fri Jan 05, 2024 6:24 pm
Forum: Beginner Basics
Topic: Help with reading dropped packets in WAN
Replies: 0
Views: 1228

Help with reading dropped packets in WAN

Hello guys, I've been messign with my setup these past days and I've also enabled the log for the drop all else in input chain for my firewall. It logs some strange for me packets being dropped. There are two types, one that are "In interface WAN1" coming from 3 or 4 different src MAC addr...
by draid
Mon Jan 01, 2024 9:23 pm
Forum: Beginner Basics
Topic: Inter-VLAN routing (unable to reach clients from VLAN)
Replies: 24
Views: 2003

Re: Inter-VLAN routing (unable to reach clients from VLAN)

Oh I see, I've deleted this one but on the test router and here it was left... It is removed now, thanks. In addition I've made a small change on the ICMP accept rule to block WAN ping reponse. add action=accept chain=input comment="defconf: accept ICMP" \ in-interface-list=VLAN protocol=i...
by draid
Mon Jan 01, 2024 8:23 pm
Forum: Beginner Basics
Topic: Inter-VLAN routing (unable to reach clients from VLAN)
Replies: 24
Views: 2003

Re: Inter-VLAN routing (unable to reach clients from VLAN)

Ok, so it was my fault but I fould the mistake. As mentioned I've added the WAN to the drop as there was not internet access. Turned out that some of the filter rules I've copied with connection type filed active. Maybe it messeed up with the config. Cleaned these and it seems to be working as inten...
by draid
Mon Jan 01, 2024 7:48 pm
Forum: Beginner Basics
Topic: Inter-VLAN routing (unable to reach clients from VLAN)
Replies: 24
Views: 2003

Re: Inter-VLAN routing (unable to reach clients from VLAN)

Yeah I've messed the order. Moved the one in the forward chain but somehow missed the rules in input. Modified it as pointed but still no internet if the last rule is simply drop all. When drop all in interface= WAN. Guess it was missed in your first comment or am I missing something? And what about...
by draid
Mon Jan 01, 2024 7:17 pm
Forum: Beginner Basics
Topic: Inter-VLAN routing (unable to reach clients from VLAN)
Replies: 24
Views: 2003

Re: Inter-VLAN routing (unable to reach clients from VLAN)

The NVR rule is not relevant. It is a leftover from an old config and it was disabled. I've modified the firewall in the following manner: Lists /interface list add comment=defconf name=WAN add comment="Full VLAN List" name=VLAN add name=BaseVLAN add comment="Internet Restricted"...
by draid
Mon Jan 01, 2024 5:04 pm
Forum: Beginner Basics
Topic: Inter-VLAN routing (unable to reach clients from VLAN)
Replies: 24
Views: 2003

Re: Inter-VLAN routing (unable to reach clients from VLAN)

So today I tried to transfer the whole confing to the main router and had a mixed results. I think the majority of the setup is working corectly but still have some issues with properly restricting the seperate VLANs. I guess the problem is agian in the firewall - I tried a bit different approach (m...
by draid
Sun Dec 31, 2023 5:34 pm
Forum: Beginner Basics
Topic: Inter-VLAN routing (unable to reach clients from VLAN)
Replies: 24
Views: 2003

Re: Inter-VLAN routing (unable to reach clients from VLAN)

Hence why I asked if you had actually tried to reach a device, not just pinging............ ( in post #10 )
Yup when you asked I though about it but couldn't test it yesterday. I tried SMB but I'm not sure if the case with the firewall isn't the same there.
by draid
Sun Dec 31, 2023 12:11 pm
Forum: Beginner Basics
Topic: Inter-VLAN routing (unable to reach clients from VLAN)
Replies: 24
Views: 2003

Re: Inter-VLAN routing (unable to reach clients from VLAN)

A little update from me. As mkx pointed out and I had some suspicions on this it turns out that indeed the windows firewall was the one to blame. It does block ICMP from a different subnet. By default, ICMP or all public/private networks is accepting only requests from its own subnet. Only needed to...
by draid
Sat Dec 30, 2023 10:37 pm
Forum: Beginner Basics
Topic: Inter-VLAN routing (unable to reach clients from VLAN)
Replies: 24
Views: 2003

Re: Inter-VLAN routing (unable to reach clients from VLAN)

Just tried to reboot, unfortunately no luck there. Adding the rule didn't help either. Only replay comes from the gateway at 10.0.10.1 and the base one at 192.168.2.1. Maybe it would be a good idea to try reset again and setup from scratch and see if I'd have any luck. Could it be that there is a ch...
by draid
Sat Dec 30, 2023 10:17 pm
Forum: Beginner Basics
Topic: Inter-VLAN routing (unable to reach clients from VLAN)
Replies: 24
Views: 2003

Re: Inter-VLAN routing (unable to reach clients from VLAN)

Ok, this came from the Mikrotik documentation, and it was pointed as a way to deal with the dynamic VLAN1 created. So I guess I've left it during the initial testing yesterday. However, I've just reverted to Admit all and there seems to be no effect. Still getting Request timed out while trying to p...
by draid
Sat Dec 30, 2023 9:47 pm
Forum: Beginner Basics
Topic: Inter-VLAN routing (unable to reach clients from VLAN)
Replies: 24
Views: 2003

Re: Inter-VLAN routing (unable to reach clients from VLAN)

Yes, this is what I thought about from yesterday as I was not able to reach no matter what I did. I even tried to check the windows firewall to see if this would not give some problems but it seems that it's not the issue. The configuration haven't changed a lot from the first export (it was full ex...
by draid
Sat Dec 30, 2023 5:37 pm
Forum: Beginner Basics
Topic: Inter-VLAN routing (unable to reach clients from VLAN)
Replies: 24
Views: 2003

Re: Inter-VLAN routing (unable to reach clients from VLAN)

Hello anav, Thanks for the support. Unfortunetly it seems that this is also not working. I can ping the gateway of the VLAN for example 10.0.10.1 is reachable, but the client at 10.0.10.253 lets say is giving request time out. I've tried also only with the rules provided by you but still the results...
by draid
Sat Dec 30, 2023 2:19 pm
Forum: Beginner Basics
Topic: Inter-VLAN routing (unable to reach clients from VLAN)
Replies: 24
Views: 2003

Inter-VLAN routing (unable to reach clients from VLAN)

Hello guys, I was playing with some VLANs on my router as I intend to transfer everything to a new router and remove one of the switches. For this I'd need few seperate VLANs - main vlan, survaliance, IoT, etc. I followed the main topic for VLAN setups and also dig a lot into the documentation. Curr...
by draid
Mon May 08, 2023 10:48 am
Forum: General
Topic: Wireguard - Problems accessing specific devices on local network
Replies: 11
Views: 1174

Re: Wireguard - Problems accessing specific devices on local network

Little update on the problem:

As I suspected, it wasn't the MT settings as a whole but the settings of the NVR. It turned out that I've had a typo on the GW address set on the NVR.
by draid
Sat May 06, 2023 9:42 pm
Forum: General
Topic: Wireguard - Problems accessing specific devices on local network
Replies: 11
Views: 1174

Re: Wireguard - Problems accessing specific devices on local network

Yes the main poin is that the wireguard is working and I'm able to reach the server, the main router and some of the other devices except the NVR and the AP. I've tried to provide as much information as possible without revealing any sensitive information as there are a lot of information like MAC a...
by draid
Sat May 06, 2023 8:52 pm
Forum: General
Topic: Wireguard - Problems accessing specific devices on local network
Replies: 11
Views: 1174

Re: Wireguard - Problems accessing specific devices on local network

It is pretty much the default configuration with some additions mainly in regards of dual WAN, 2 rules in the firewall that I already stated in the first post. I can connect to the most of the devices on my local network and also I can ping between the remote device IP and local devices except these...
by draid
Sat May 06, 2023 8:26 pm
Forum: General
Topic: Wireguard - Problems accessing specific devices on local network
Replies: 11
Views: 1174

Re: Wireguard - Problems accessing specific devices on local network

I've already explained the configuration but if you insist on it, here you go. HEX /interface list add comment=defconf name=WAN add comment=defconf name=LAN /ip pool add name=default-dhcp ranges=192.168.x.x-192.168.x.x /ip dhcp-server add address-pool=default-dhcp interface=bridge lease-time=xx name...
by draid
Sat May 06, 2023 7:20 pm
Forum: General
Topic: Wireguard - Problems accessing specific devices on local network
Replies: 11
Views: 1174

Re: Wireguard - Problems accessing specific devices on local network

I've been trying to do it from an android phone. The configuration is straightforward. Wireguard app-> interface which public key goes to the MT peer config->Addresses 192.168.100.2/32, DNS 192.178.100.1->Peer with public key = MT interface key->Allowed IPs 0.0.0.0/0->Endpoint the public IP address ...
by draid
Sat May 06, 2023 6:43 pm
Forum: General
Topic: Wireguard - Problems accessing specific devices on local network
Replies: 11
Views: 1174

Wireguard - Problems accessing specific devices on local network

Hello guys, I've been playing with wireguard the recent days and something really strange is happening. I have no problems at all to establish a connection and to get acess to the main router on which the wireguard is set. Also I'm getting access to the home server and all services that are running ...
by draid
Wed Mar 08, 2023 8:45 am
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 137459

Re: v7.8 [stable] is released!

At last the SFP module information is fixed. Now I can see the information for the MT SFP modules.
by draid
Thu Oct 20, 2022 10:14 am
Forum: Announcements
Topic: v7.6 [stable] is released!
Replies: 279
Views: 141849

Re: v7.6 [stable] is released!

Hex S SFP info is still unavaliable. All boxes are empty. Does anyone still have this problem?
by draid
Wed Aug 31, 2022 10:41 pm
Forum: Announcements
Topic: v7.5 [stable] is released!
Replies: 219
Views: 68366

Re: v7.5 [stable] is released!

The SFP module information is still missing and this is getting really frustrating. I understand if it was some kind of 3rd party SFP module, but one would expect a MT branded module to work out of the box with a MT device as intended. HexS and S-85DLC05D. I'm tired of rolling back to 6.49 every tim...
by draid
Wed Jul 20, 2022 10:00 pm
Forum: Announcements
Topic: v7.4 [stable] is released!
Replies: 226
Views: 54630

Re: v7.4 [stable] is released!

Anyone who can confirm if the problem with missing SFP module information is being addressed? I highly doubt but at the moment the test device isn't available and I do not want to upgrade the used devices just to find out that this is still not resolved. I know that in RC it wasn't but hope is a str...
by draid
Thu Jun 30, 2022 10:15 am
Forum: Announcements
Topic: v7.3 and v7.3.1 [stable] is released!
Replies: 269
Views: 79548

Re: v7.3 and v7.3.1 [stable] is released!

So indeed it turns out that the missing SFP information is something specific for v7 for some modules. Hope this will be resolved as it's really inconvenient. I know for a fact it was missing on every single v7 version till now as I tried all of them except 7.4.
by draid
Thu Jun 30, 2022 9:23 am
Forum: Beginner Basics
Topic: Hex S doesn't show any details for the SFP module on v7.3.1
Replies: 14
Views: 1905

Re: Hex S doesn't show any details for the SFP module on v7.3.1

You send a supout and open ticket to support@mikrotik.com ??? No I've not opened a ticked as I wasn't sure if it's a bug or I'm missing something. Never had this problem but have you tried another SPF module from a different manufacturer? Unfortunately I do not have any SFP modules from other suppl...
by draid
Sun Jun 26, 2022 9:20 pm
Forum: Announcements
Topic: v7.3 and v7.3.1 [stable] is released!
Replies: 269
Views: 79548

Re: v7.3 and v7.3.1 [stable] is released!

Hello guys, Don't know if this is a bug or I'm missing something but after v7 my Hex S refuses to show any information for the SFP module which I'm using on it. Even posted a separate topic in the forum, but it seems no one knows anything for this. I've tested on 7;7.1;7.2;7.3 and the problem is the...
by draid
Fri Jun 24, 2022 9:03 am
Forum: Beginner Basics
Topic: Hex S doesn't show any details for the SFP module on v7.3.1
Replies: 14
Views: 1905

Re: Hex S doesn't show any details for the SFP modul on v7.3.1

No one faced such problem or having an idea how to solve it?
by draid
Wed Jun 22, 2022 9:27 pm
Forum: Beginner Basics
Topic: Hex S doesn't show any details for the SFP module on v7.3.1
Replies: 14
Views: 1905

Hex S doesn't show any details for the SFP module on v7.3.1

Hello guys, I'm having a strange problem which is a bit frustrating. Once v7 was released I figured out that once upgraded the Hex S stopped showing any information about the SFP module which I'm using. I thought it was some kind of a bug in the new version, so I just downgraded and waited for few m...
by draid
Wed Jan 26, 2022 9:55 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223459

Re: v7.1.1 is released!

A quick update on the problem with the missing information from the SFP module on my Hex S. I've tried some things in order to resolve the problem but nothing seems to be working, tried even the v7.2 but without any success. Few minutes ago I downgraded back to 6.42.2 and surprise everything on the ...
by draid
Wed Jan 26, 2022 6:08 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223459

Re: v7.1.1 is released!

Hello guys, Recently I've found that all of the information for the SFP interface is missing on v7.1.1. At the moment there is no information listed at all, something that was present in v6.x.x. Currently using Hex S and S-85DLC05DI module. Anyone having the same problem on v7? It´s not a general b...
by draid
Wed Jan 26, 2022 10:47 am
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 223459

Re: v7.1.1 is released!

Hello guys, Recently I've found that all of the information for the SFP interface is missing on v7.1.1. At the moment there is no information listed at all, something that was present in v6.x.x. Currently using Hex S and S-85DLC05DI module. Anyone having the same problem on v7? Screenshot 2022-01-26...
by draid
Tue Jan 18, 2022 7:27 pm
Forum: Beginner Basics
Topic: Dual WAN Recursive Failover ROSv7
Replies: 29
Views: 9472

Re: Dual WAN Recursive Failover ROSv7

Yes 10.10.10.1 and 10.20.20.2 are not the gateway adresses of the two ISPs. As aesmith said the configuration could be simplified by removing the 4 10.x.x.x addresses and just add two more default gateways, so something like: 1. 0.0.0.0/0 GW 8.8.8.8 Dst 1 2. 0.0.0.0/0 GW 208.67.220.220 Dst 1 3. 0.0....
by draid
Mon Jan 17, 2022 9:28 pm
Forum: Beginner Basics
Topic: Dual WAN Recursive Failover ROSv7
Replies: 29
Views: 9472

Re: Dual WAN Recursive Failover ROSv7

Can you show the routes actually in effect as well? From the CLI " ip route print ". I think the orange routes are your only actual default routes. Orange routes are indeed the only default routes. Screenshot 2022-01-17 213002.jpg Then no need for default routes........ I dont use any on ...
by draid
Mon Jan 17, 2022 2:35 pm
Forum: Beginner Basics
Topic: Dual WAN Recursive Failover ROSv7
Replies: 29
Views: 9472

Re: Dual WAN Recursive Failover ROSv7

No, I'm not using any Mangal rules. Just fail-over with src-nat. ISP1 is the priority link and when it's up I'm using it. Some day I may split the traffic but at the moment it isn't.
by draid
Mon Jan 17, 2022 9:13 am
Forum: Beginner Basics
Topic: Dual WAN Recursive Failover ROSv7
Replies: 29
Views: 9472

Re: Dual WAN Recursive Failover ROSv7

^ It is working as the posted configuration. At the moment if GW 8.8.8.8 for ISP1 fails it's using then 208.67.220.220 , if that also fails it's switching to the second ISP. And if the path through ISP1 is active again it's switching back to ISP1. The only strange behavior I see is that if I pull th...
by draid
Sun Jan 16, 2022 5:35 pm
Forum: Useful user articles
Topic: Advanced Routing Failover without Scripting
Replies: 268
Views: 134178

Re: Advanced Routing Failover without Scripting

Hello guys, I've made a separate topic to ask for support on some difficulties I faced with the recursive fail-over on v7 due to the changes of the scope/target-scope, but now I found out that there is a dedicated thread for this. As of this moment I've managed to push something with what it seems a...
by draid
Sat Jan 15, 2022 7:46 pm
Forum: Beginner Basics
Topic: Dual WAN Recursive Failover ROSv7
Replies: 29
Views: 9472

Re: Dual WAN Recursive Failover ROSv7

Nexthops are moved to Routing->Nexthops. VRF I can see in Interface->VRF and IP->VRF (don't ask me why two). But the nice and friendly "recursive via" seems to be gone. You can enable "Immediate Gateway" column, but the whole thing works weird, display is lagging, doesn't update...
by draid
Sat Jan 15, 2022 6:51 pm
Forum: Beginner Basics
Topic: Dual WAN Recursive Failover ROSv7
Replies: 29
Views: 9472

Re: Dual WAN Recursive Failover ROSv7

The thing is it doesn't show anything in v7, just the Gateway. As I mentioned it also is missing the Nexthops and VRF tabs, only Routes and Rule tab available.
Screenshot 2022-01-15 185019.jpg
I guess your screenshot is from v6.x,x?
by draid
Sat Jan 15, 2022 6:40 pm
Forum: Beginner Basics
Topic: Dual WAN Recursive Failover ROSv7
Replies: 29
Views: 9472

Re: Dual WAN Recursive Failover ROSv7

So, today I had some time for more experiments and it seems that I managed to force it in a working condition or at least it seems to be working as intended. The changes currently made to the configuration that I've shared which was working on v6.x.x are as follow: /ip route add disabled=no distance...
by draid
Fri Jan 14, 2022 11:58 am
Forum: Beginner Basics
Topic: Dual WAN Recursive Failover ROSv7
Replies: 29
Views: 9472

Re: Dual WAN Recursive Failover ROSv7

I hope that today I'll have more time to upgrade again and to try reconfigure it again. The thing is that they really should in my opinion give some more documentation on how this is supposed to work as at the moment it's a complete try/error for such configuration which shouldn't happen. As for the...
by draid
Thu Jan 13, 2022 8:02 pm
Forum: Beginner Basics
Topic: Dual WAN Recursive Failover ROSv7
Replies: 29
Views: 9472

Re: Dual WAN Recursive Failover ROSv7

Quoting from another thread (and no dont understand them either) Just two rules: 1) scope of next route should be not more than target-scope of your route (can be equal or less); 2) target-scope of next route should be strictly less than target-scope of your route (this one was introduced in ROS v7...
by draid
Thu Jan 13, 2022 4:34 pm
Forum: Beginner Basics
Topic: Dual WAN Recursive Failover ROSv7
Replies: 29
Views: 9472

Re: Dual WAN Recursive Failover ROSv7

I've just been modelling this with a CHR in GNS3, and as far as I can see for a three layer configuration there are two changes from RoS 6. (1) Your logical gateways 10.10.10.1 and 10.20.20.2 need to be actual addresses that will respond to ping (2) Target scope for the routes to these gateways nee...
by draid
Thu Jan 13, 2022 1:37 pm
Forum: Beginner Basics
Topic: Dual WAN Recursive Failover ROSv7
Replies: 29
Views: 9472

Dual WAN Recursive Failover ROSv7

Hello guys, Recently I decided to upgrade also my main router to v7 and as a lot others it seems I found that my configuration wasn't working properly. All recursive routes were invalid and so on. I've found two topics in the forum in which this was discussed, tried multiple configuration with diffe...
by draid
Wed Dec 08, 2021 9:33 pm
Forum: Announcements
Topic: v7.1 is released!
Replies: 785
Views: 223023

Re: v7.1 is released!

Hello guys,

Upgraded to v7.1 a while ago and I'm still struggling to run the recursive fail-over configuration I was using. It's just stating Invalid on multiple rules and refuses to work. Are recursive routes working on v7 at all?
by draid
Mon Sep 06, 2021 11:09 am
Forum: Beginner Basics
Topic: Good switch for home use or RB4011 RB5009?
Replies: 18
Views: 12796

Re: Good switch for home use or RB4011 RB5009?

Which CRS326 are you looking ?
There is the desktop version as well https://mikrotik.com/product/crs326_24g_2s_in
Yes, exactly this one. There is no way to fit the rack mount model. And I'm pretty mad now that the width I have is 280mm and the switch is 285...
by draid
Sun Sep 05, 2021 9:36 pm
Forum: Beginner Basics
Topic: Good switch for home use or RB4011 RB5009?
Replies: 18
Views: 12796

Re: Good switch for home use or RB4011 RB5009?

The Switch OS isn't a problem however I see that this SW OS Lite have numerous problems and I would prefer to play it safe. The SFP+ isn't mandatory, it could be a good to have them and it's gonna be more future proof but it isn't mandatory. However a minimum of 1 (pref. 2) SFP ports are mandatory a...
by draid
Sat Sep 04, 2021 10:57 pm
Forum: Beginner Basics
Topic: Good switch for home use or RB4011 RB5009?
Replies: 18
Views: 12796

Re: Good switch for home use or RB4011 RB5009?

How about one CRS326-24G-2S+IN (https://mikrotik.com/product/crs326_24g_2s_in)? This is the desktop version, not the rack one. One passive PoE in 2 SFP+ Passive cooling 24 gigabit RJ45 SwOS/RouterOS 28cm width. If it was smaller 8/16 +2S it would be a great choice. Unfortunately I would need two sm...
by draid
Sat Sep 04, 2021 9:54 pm
Forum: Beginner Basics
Topic: Good switch for home use or RB4011 RB5009?
Replies: 18
Views: 12796

Re: Good switch for home use or RB4011 RB5009?

but the switching of RB5009 would be worst I think. Worst in comparison with what device ? Compared to the switch variants which we are discussing. Personally i would choose the CRS112, with or without POE... why? WHY? It’s old tech not in sync with the CRS3xx line …. The only positive IMO is that ...
by draid
Sat Sep 04, 2021 9:01 pm
Forum: Beginner Basics
Topic: Good switch for home use or RB4011 RB5009?
Replies: 18
Views: 12796

Re: Good switch for home use or RB4011 RB5009?

Thank you for the reply. For this switch I would not need PoE. And it could even be powered from the hEX so I can save one power socket. I think that at least 2 SFP ports could be good but one is mandatory. The idea is that currently the PoE switch powering the cameras is 10 port 8xPoE 1xRJ45 and 1x...
by draid
Sat Sep 04, 2021 7:58 pm
Forum: Beginner Basics
Topic: Good switch for home use or RB4011 RB5009?
Replies: 18
Views: 12796

Good switch for home use or RB4011 RB5009?

Hello guys, I've been using MikroTik for few years now and I'm pretty happy with the devices. Currently I'm using hEX S as gateway router and 2 hAP AC^2. In addition I have two TP-Link switches, one that is powering my surveillance and one as main "smart" switch. I'm planning to upgrade th...
by draid
Mon Nov 09, 2020 10:45 pm
Forum: Beginner Basics
Topic: DNS Cache Setup - Allow-remote-requests
Replies: 5
Views: 1119

Re: DNS Cache Setup - Allow-remote-requests

Confusing terminology for me. Internal doesnt mean touching public IP. So does the MT get a public IP?? , or are you using double NAT so to speak. Yeah my bad, now when I'm reading it again it seems to not be really clear. I have a hEX in the following setup with recursive failover: Eth1: ISP1 main...
by draid
Mon Nov 09, 2020 9:37 pm
Forum: Beginner Basics
Topic: DNS Cache Setup - Allow-remote-requests
Replies: 5
Views: 1119

DNS Cache Setup - Allow-remote-requests

Hello guys, Currently I'm using couple of Mikrotik devices in my internal network. The main router has two ISP connections (PPoE and Static coming from DSL model as backup). I've also set up the router with Allow-remote-requests=yes. As for now I don't have any specific rules to drop port 53 inputs ...
by draid
Sun Apr 19, 2020 10:01 pm
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49388

Re: Winbox v3.23 released!

Thank you very much. I was so frustrated of this problem and now with the update I rushed to 3.23 but...
by draid
Sun Apr 19, 2020 5:15 pm
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49388

Re: Winbox v3.23 released!

Resizing of the inner windows is still present and it's still highly annoying :/ Anyone know where to find 3.21?
by draid
Wed Mar 25, 2020 2:59 pm
Forum: Beginner Basics
Topic: WinBox windows position and size
Replies: 3
Views: 1814

Re: WinBox windows position and size

I think the only way is to have the old version .exe saved somewhere. It may happen to be a bug in the current winbox version and it is utterly annoying.¶
by draid
Wed Mar 25, 2020 1:34 pm
Forum: Beginner Basics
Topic: WinBox windows position and size
Replies: 3
Views: 1814

WinBox windows position and size

Hello, guys, Recently after updating to 3.22 of the winbox I found that every time I log into winbox my windows position and size is displaced. I've tried to save the session but without any success. Every time I log into the windows are expanded and on a different place, so I have to arrange them e...
by draid
Sat Feb 22, 2020 10:47 am
Forum: General
Topic: Mikrotik creates DHCP Client after every reboot
Replies: 3
Views: 1660

Re: Mikrotik creates DHCP Client after every reboot

Interfaces -> Detect Internet -> set Detect Interface List to none
Great, it seems that this is working, but it completely disables the detect internet feature.
by draid
Thu Feb 20, 2020 11:14 am
Forum: General
Topic: Mikrotik creates DHCP Client after every reboot
Replies: 3
Views: 1660

Re: Mikrotik creates DHCP Client after every reboot

Anyone with solution to this problem?
by draid
Wed Feb 19, 2020 8:48 pm
Forum: General
Topic: Mikrotik creates DHCP Client after every reboot
Replies: 3
Views: 1660

Mikrotik creates DHCP Client after every reboot

Hello guys, recently after the last updates I found that my fail-over doesn't work. After some troubleshooting it turned out that there is a new DHCP client assigned to Eth1 which I haven't created (Default DHCP client is disabled). It turned out that I cannot disable it but if It is deleted it just...
by draid
Sun Feb 16, 2020 9:37 pm
Forum: Beginner Basics
Topic: Securing L2TP/IPSec server on Mikrotik
Replies: 9
Views: 5323

Re: Securing L2TP/IPSec server on Mikrotik

That's a good news! Currently I have the following setup on the L2TP/IPSec: I'm creating a new profile /ppp profile add local-address=x.x.x.1 name=ipsec-vpn remote-address=vpn-pool \ use-encryption=required use-upnp=no New pool with addresses for the vpn: /ip pool add name=vpn-pool ranges=x.x.x.2-x....
by draid
Sun Feb 16, 2020 6:20 pm
Forum: Beginner Basics
Topic: Securing L2TP/IPSec server on Mikrotik
Replies: 9
Views: 5323

Securing L2TP/IPSec server on Mikrotik

Hello guys, I've set a L2TP/IPSec server on my Hex. The main purpose of which is to securely access my video surveillance from outside. I've set everything and the L2TP is set with IPSec required, however I'm a bit worried about the opened ports: add chain=input protocol=udp port=1701,500,4500 add c...
by draid
Fri May 31, 2019 7:51 pm
Forum: Beginner Basics
Topic: DHCP Server problem
Replies: 1
Views: 1105

DHCP Server problem

Hello guys, I found something really strange in the log of the main router recently. It appears that the DCHP server is giving ip addresses to the other Mikrotik devices and imminently after that it de assign them. So basically the log is full of this. The current setup is HEX S as main router -> 2x...
by draid
Fri Mar 15, 2019 8:05 pm
Forum: General
Topic: How to reach RouterOs (web or Winbox) via my static ip address from outside network
Replies: 24
Views: 6426

Re: How to reach RouterOs (web or Winbox) via my static ip address from outside network

I get it. You don't need to open WinBox port from everywhere, you can do it only for connections from VPN, e.g. with in-interface=<vpn client interface>.
Yes, that makes sense. Don't know how I missed it. I\ll definitely try it. Thank you.
by draid
Thu Mar 14, 2019 8:35 pm
Forum: General
Topic: How to reach RouterOs (web or Winbox) via my static ip address from outside network
Replies: 24
Views: 6426

Re: How to reach RouterOs (web or Winbox) via my static ip address from outside network

And about remote access, you have to open some port (VPN should be better than bare WinBox), otherwise you won't be able to connect. Yes, that is true, but along with the VPN port you need to do something with the winbox port if you want to use be able to log remotely through winbox on a client. Wh...
by draid
Wed Mar 13, 2019 9:42 pm
Forum: General
Topic: How to reach RouterOs (web or Winbox) via my static ip address from outside network
Replies: 24
Views: 6426

Re: How to reach RouterOs (web or Winbox) via my static ip address from outside network

I would like to ask which would be the best way to access the router remotely? I'm currently using OVPN but it still seems that the option isn't secure when the port is open? Am I right?
by draid
Wed Mar 13, 2019 7:52 pm
Forum: Beginner Basics
Topic: Daul wan with failover
Replies: 11
Views: 15022

Re: Daul wan with failover

Hi RPI, the DHCP server settings, domain should be empty, not 8.8.4.4. You put 8.8.4.4 as 2nd DNS server if you click on the winbox on the DHCP server setting , but don;t put it into domain. In DHCP-CLIENT: you need to DISABLE "add default route" else router does always use default route!...
by draid
Tue Mar 12, 2019 10:46 pm
Forum: Beginner Basics
Topic: Daul wan with failover
Replies: 11
Views: 15022

Re: Daul wan with failover

Hello, this is the configuration I'm using at the moment. I'm also using PPoE and Static address for ISP1/ISP2. Be aware that you can't use PPoE interface for recursive. /ip route add distance=1 gateway=10.1.1.1 //This can be any address but it has to be the same in the check-gateway //Main Link// a...
by draid
Sat Mar 09, 2019 12:22 am
Forum: General
Topic: Feature Request: OpenVPN [ovpn] udp tunnels
Replies: 249
Views: 138819

Re: Feature Request: OpenVPN [ovpn] udp tunnels

+1 for the UDP

And the silly duplicate package error is terribly annoying don't know why it isn't addressed.
by draid
Sat Feb 23, 2019 1:36 pm
Forum: Beginner Basics
Topic: Can't log to mikrotik via VPN
Replies: 0
Views: 860

Can't log to mikrotik via VPN

Hello guys, I've encountered the following problem with both OVPN and SSTP. After the initial set up of the server and the client I'm able to connect to the server and I have access to the local network behind the VPN server. I have access to one of the servers behind the Tik and I have ping to the ...
by draid
Tue Feb 19, 2019 10:00 pm
Forum: Beginner Basics
Topic: Open VPN duplicate packet
Replies: 2
Views: 1054

Re: Open VPN duplicate packet

I was fighting with this recently. It turned out that there is no way to solve the problem or at least there isn't any information available. Here is the topic: https://forum.mikrotik.com/viewtopic.php?f=2&t=145145&p=715579#p715579 I'm still searching for a way to hide these specific echo wa...
by draid
Sat Feb 16, 2019 6:02 pm
Forum: General
Topic: Duplicate packet drop error - OpenVPN
Replies: 14
Views: 28977

Re: Duplicate packet drop error - OpenVPN

Most people running ovpn on MT have this error. Nobody knows why or how to fix it. Only how to hide it in logs. So your setup is OK. I have it on all MT routers I am running or tested ovpn on. Please stop responding if you have no input on the matter just to say "i think, it's because your con...
by draid
Tue Feb 12, 2019 7:12 pm
Forum: General
Topic: Duplicate packet drop error - OpenVPN
Replies: 14
Views: 28977

Re: Duplicate packet drop error - OpenVPN

Most people running ovpn on MT have this error. Nobody knows why or how to fix it. Only how to hide it in logs. So your setup is OK. I have it on all MT routers I am running or tested ovpn on. Please stop responding if you have no input on the matter just to say "i think, it's because your con...
by draid
Sun Feb 10, 2019 3:16 pm
Forum: General
Topic: Duplicate packet drop error - OpenVPN
Replies: 14
Views: 28977

Re: Duplicate packet drop error - OpenVPN

Hi Do you see it often? If not just ignore, it's informative, and Tik did the right thing already: dropped the duplicate. It might be the consequence of tcp over tcp: opvn tunnel on Tik is tcp based, and if tcp connection is run through the tunnel, that might cause some (unnecessary) retransmission...
by draid
Sun Feb 10, 2019 1:19 pm
Forum: General
Topic: Duplicate packet drop error - OpenVPN
Replies: 14
Views: 28977

Re: Duplicate packet drop error - OpenVPN

No one has any idea how to deal with this problem? I'm seriously stuck at this and the only thread I found with the same problem doesn't seems to deal with it.
by draid
Sat Feb 09, 2019 5:42 pm
Forum: General
Topic: Duplicate packet drop error - OpenVPN
Replies: 14
Views: 28977

Duplicate packet drop error - OpenVPN

Hello guys, Long story short, I've used OpenVPN on a server behind the mikrotik but I had few problems so I've decided to setup OVPN server on the mikrotik (Hex). I've made the settings and everything seemed to be ok but when the client is connected to the server the mikrotik logs the following erro...
by draid
Mon Feb 04, 2019 10:39 pm
Forum: Beginner Basics
Topic: Total Noob's Guide?
Replies: 2
Views: 952

Re: Total Noob's Guide?

I don't have a great experience with mikrotik but could you please tell us something more about your setup. Is the mikrotik behind another device, how do you normally connect is it PPPoE, etc. You may use the quick setup of the mikrotik which has few options that must work with all basic home setups...
by draid
Sun Jan 27, 2019 10:17 am
Forum: General
Topic: Port Knocking + OpenVPN
Replies: 2
Views: 2807

Re: Port Knocking + OpenVPN

Perhaps you're right. It was set on the server as I was using UDP. But maybe I would look at setting up the VPN server to the mikrotik router and it'll resolve all of the mentioned problems.
by draid
Sat Jan 26, 2019 6:43 pm
Forum: General
Topic: Port Knocking + OpenVPN
Replies: 2
Views: 2807

Port Knocking + OpenVPN

Helllo guys, As I wrote recently I'm using a VPN to connect remotely to my network/router in the name of a better security. There is an OpenVPN server installed on a linux server behind a mikrotik router. The Base path to the server is generally hexS -> hap ac^2 -> debian server with VPN. I was forw...
by draid
Sun Jan 20, 2019 6:28 pm
Forum: General
Topic: Using src-nat over masquarade (Static public addresses)
Replies: 2
Views: 904

Re: Using src-nat over masquarade (Static public addresses)

Well, basically I'm using the ADSL link only for back up as it's slower than the main link (30Mbps). Generally I used this recursive fail-over for more then a month with no visible problems. Every link checks one google and one open DNS address (in case some of them have problems) And if both hosts ...
by draid
Sat Jan 19, 2019 5:38 pm
Forum: General
Topic: Using src-nat over masquarade (Static public addresses)
Replies: 2
Views: 904

Using src-nat over masquarade (Static public addresses)

Hello guys, I have the following configuration at this moment: RB760iGS - x1 as main router (Eth0 for the main PPPoE link and Eth1 for the backup link which is behind ADSL modem) hAP ac^2 - x2 as AP bridges Both Main ISP and the BackUP ISP are providing static public addresses. Till now I was using ...
by draid
Fri Jan 18, 2019 9:31 pm
Forum: General
Topic: Strange IP addresses forwarded to internal server
Replies: 6
Views: 1502

Re: Strange IP addresses forwarded to internal server

There is: use tls-auth. see https://community.openvpn.net/openvpn/wiki/Hardening But I don't think that OpenVPN on Tik supports that... My vpn runs off Tik Thanks for the link. I'll take a look at it. The VPN isn't on the tik, it runs on a omv server which is based on debian. The mikrotik only forw...
by draid
Thu Jan 17, 2019 7:36 pm
Forum: General
Topic: Strange IP addresses forwarded to internal server
Replies: 6
Views: 1502

Re: Strange IP addresses forwarded to internal server

It's not that I don't trust it as someone who'd like to connect would need to obtain the certificates. I was just wondering if there is a way to increase the security in this case.
by draid
Wed Jan 16, 2019 9:35 pm
Forum: General
Topic: Strange IP addresses forwarded to internal server
Replies: 6
Views: 1502

Re: Strange IP addresses forwarded to internal server

That rule will allow any IP address to connect to your VPN server, if you expose services on well known ports they will get scanned at some point. You could create an address list, e.g. 'VPNusers' and add src-address-list=VPNusers to the rule. This will prevent access to your VPN server if the addr...
by draid
Tue Jan 15, 2019 8:55 pm
Forum: General
Topic: Dual wan fail over, fail back not working
Replies: 9
Views: 3867

Re: Dual wan fail over, fail back not working

That's normal consequence of masq & fail-over. When your primary comes back, existing connections gets routed over primary, but connection state is still linked to secondary. This results in masquerade not being applied, and leakage of private ip's to ISP. By manually disabling wan2, these conn...
by draid
Tue Jan 15, 2019 8:42 pm
Forum: General
Topic: Strange IP addresses forwarded to internal server
Replies: 6
Views: 1502

Strange IP addresses forwarded to internal server

Hello guys, I have the following configuration at the moment: 1. Main router - hEX S 2. AP/Bridge - hAP ac^2 x2 The main router (Dual WAN) is with default firewall rules (IMCP allowed only from local, everything except winbox is disabled) and both hAPs are reset with no configuration and set as AP (...
by draid
Sun Dec 16, 2018 4:25 pm
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Re: Mikrotik Dual WAN Failover

This definitely needs to be addressed unless you only need it for the testing phase. Either give the server its own subnet or use a src-nat rule (/ip firewall nat add chain=srcnat action=src-nat protocol=udp dst-address=the.lan.ip.of.the.server dst-port=1194 to-addresses=the.ip.of.mikrotik.itself.i...
by draid
Sun Dec 16, 2018 1:06 pm
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Re: Mikrotik Dual WAN Failover

Hello Sindy, I'm glad you've joined the conversation. I'm going to answer your questions in the order you posted them: The Eth1 is for the PPPoE and it's address is directly coming from the pppoe-out client assigned on Eth1. Eth2 is with static address behind the ADSL modem, however I tried the port...
by draid
Sun Dec 16, 2018 9:38 am
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Re: Mikrotik Dual WAN Failover

Your firewall NAT rule looks okay, if you your destination ports are the same as the to ports, you can drop the to=ports and just have the to-adddresses. The Filter rule looks wrong, all you need is the following: add action=accept chain=forward comment=\ "Allow Port Forwarding - DSTNAT" ...
by draid
Sat Dec 15, 2018 8:35 pm
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Re: Mikrotik Dual WAN Failover

Greetings guys! I didn't had a lot of time recently, so the further configuration of the hAP was on hold. As the christmas holidays are getting closer I hope that I'll manage to finalize and test everything that I wanted to do with the router. Currently I think that the failover is finished and it's...
by draid
Sun Sep 23, 2018 2:28 pm
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Re: Mikrotik Dual WAN Failover

What is the traffic volume through WAN2? Each route with check-gateway=ping generates one ping request and response every 10 seconds, maybe up to three requests when the monitored IP doesn't respond (which is how netwatch behaves so I'd expect the same approach to be reused also here). Another sour...
by draid
Sun Sep 23, 2018 10:01 am
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Re: Mikrotik Dual WAN Failover

OK, so one possibility would be to use a script to generate a ton of routes for the whole range of remote address values the ISP provides. A better possibility is to use an on-up parameter of the /ppp profile to call a script to update the lowermost recursive route: /system script add name=update-p...
by draid
Sat Sep 22, 2018 10:50 pm
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Re: Mikrotik Dual WAN Failover

Sadly today I saw that it's not only these two GWs. They are more then two (yesterday it took only two but today I saw another 2). I though it may be the server side that is the problem with the profile variant as it is trying to establish a connection and imminently afterwords it's terminated. Hone...
by draid
Sat Sep 22, 2018 8:08 pm
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Re: Mikrotik Dual WAN Failover

For PPPoE (used at your WAN1), there is a script-less way which @Sob has described: you create a copy of /ppp profile named default, give it a name like my-pppoe-profile, and set the remote-address item in that new profile to some private address which isn't in conflict with any private subnet you ...
by draid
Sat Sep 22, 2018 11:09 am
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Re: Mikrotik Dual WAN Failover

Yes I don't have problem with the WAN2 a its gateway is constant. I'm using the ADSL modem as GW and it won't change. The route to WAN2 is static. The only thing that is changing is the remote address of the PPPoE which I'm using as WAN1 (main link). The current set is: WAN 1 - Optic -> media conver...
by draid
Fri Sep 21, 2018 11:03 pm
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Re: Mikrotik Dual WAN Failover

Hello guys, Thank you all for the precious help. Tonight I had some time to try the things up and everything seemed to work good with one exception. The remote address of the PPPoE is changing. It seems to be either 5 or 12 but it changes. So What I've done till now: /ip route add check-gateway=ping...
by draid
Mon Sep 17, 2018 8:04 am
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Re: Mikrotik Dual WAN Failover

When I say "you must use as gateway the IP address provided by the PPPoE server", I have in mind the address which that PPPoE server provides as a gateway, not the one it assigns to you. Is it what you mean by "static address of the second ISP"? Normally, where you are a PPPoE c...
by draid
Sun Sep 16, 2018 6:10 pm
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Re: Mikrotik Dual WAN Failover

First of all, the recursive routing on which the scriptless failover is based does not work if a route's gateway is set to anything else than an IP number anywhere in the recursive chain. So you cannot use the interface name ( PPPoE-out ) as a gateway for dst-address=8.8.8.8 , you have to use the I...
by draid
Sun Sep 16, 2018 2:56 pm
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Re: Mikrotik Dual WAN Failover

Hello guys, I haven't had much time recently to play with the fail-over but today I had some time and I decided to test the fail-over scenario from the article sindy posted here. I think that I'm facing a problem and I'm not exactly sure where it comes from. First of all I want to say that I'm conti...
by draid
Mon Sep 03, 2018 10:41 pm
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Re: Mikrotik Dual WAN Failover

PCC is for load balancing, from your description, you do not need that. Then I would also change the ADSL Modem to bridge mode and configure ADSL PPPoE on the Mikrotik. The do not use the "Add default Gateway"in the PPPoE settings, instead create static default routes with a distance of 1...
by draid
Mon Sep 03, 2018 7:43 pm
Forum: General
Topic: Mikrotik Dual WAN Failover
Replies: 35
Views: 22119

Mikrotik Dual WAN Failover

Hello guys, I've recently bough a mikrotik router and the model I chose as let's say my teaching router thanks to the help of some colleagues from the forum is hAP ac2. If someone is interested of something about the need of the router - here is the thread I made https://forum.mikrotik.com/viewtopic...
by draid
Fri Aug 31, 2018 7:41 am
Forum: Beginner Basics
Topic: Locked Out of Mikrotik
Replies: 29
Views: 12347

Re: Locked Out of Mikrotik

Hey amte I managed to achieve the same thing but in a different way. Still I couldn't connect to the router via web or winbox including winbox mac so a the end I just made a reset of the device. I guess it'll be a bit paintful if you have a lot of settings but it's always an option.
by draid
Fri Aug 31, 2018 7:32 am
Forum: General
Topic: MikroTik routers question
Replies: 28
Views: 5411

Re: MikroTik routers question

I thought it might be the case. According to the releases I've got a bit confused about the bugfix and current versions but as the device came with 6.42.4 I thhought it's best to upgrade it to the last 6.42.7 version. I don't know why the bugfix version is 6.40.9? Is there a devices which can't get ...
by draid
Fri Aug 31, 2018 12:36 am
Forum: General
Topic: MikroTik routers question
Replies: 28
Views: 5411

Re: MikroTik routers question

@normis reiterated a few times that seemingly high temperatures are fine and longevity of units is not at stake. That being said, I've drilled a mesh of vent holes on both top surfaces (depending on where is the transparent stand mounted). I can't say it look cooler now but it surely runs cooler. I...
by draid
Thu Aug 30, 2018 10:38 pm
Forum: General
Topic: MikroTik routers question
Replies: 28
Views: 5411

Re: MikroTik routers question

Hello once again! I get my hands on the ac2 today and I had few hours to play with it. I've upgraded the OS and played with some settings. I've even enabled a second WAN port, I've managed to lose access to the router by removing port 2 from the bridge, but with port 5 it worked fine. I'm planning t...
by draid
Tue Aug 28, 2018 7:09 pm
Forum: General
Topic: MikroTik routers question
Replies: 28
Views: 5411

Re: MikroTik routers question

So it turns out that between the hEX S and the hAP ac2, the AP is the better choice. If you don't need SFP port. No, I have an optic in my cellar but from there to the main router it's copper. And still if I need I can always use a convertor. So I guess that now I'll try to find a hAP ac2 and I'll ...
by draid
Tue Aug 28, 2018 12:42 pm
Forum: General
Topic: MikroTik routers question
Replies: 28
Views: 5411

Re: MikroTik routers question

So it turns out that between the hEX S and the hAP ac2, the AP is the better choice.
by draid
Tue Aug 28, 2018 8:03 am
Forum: General
Topic: MikroTik routers question
Replies: 28
Views: 5411

Re: MikroTik routers question

Hello guys,

I don't really need the SFP port, so I can go without it. However isn't the hAP ac2 labled as an AP or it has the same functuionallity like the hEX S? Is it possible to use hAP ac2 as a router and another hAP ac2 as a pure AP?
by draid
Sun Aug 26, 2018 11:13 am
Forum: General
Topic: MikroTik routers question
Replies: 28
Views: 5411

Re: MikroTik routers question

Greetings mducharme, Thank you for your post. The truths is that I'm not planning to do "a lot"of IPsec traffic or generally to need high routing performance. Currently I'm using the VLAN only to separate the network. My initial goal was to just "upgrade" the current 480T with so...
by draid
Sat Aug 25, 2018 11:49 pm
Forum: General
Topic: MikroTik routers question
Replies: 28
Views: 5411

Re: MikroTik routers question

Hello guys, Sorry for the delay. I've being looking for different options. Would I get hEX S (RB760iGS) over 3011? I've heard that 3011 is an old model and it's the first one with ARM so it had few problems like when you connect 10/100/1000 and 10/100 on one side. As I see on the site it looks like ...
by draid
Wed Aug 22, 2018 9:01 pm
Forum: General
Topic: MikroTik routers question
Replies: 28
Views: 5411

Re: MikroTik routers question

Sorry for the lack of information. It is for a home, there are 5 PCs, 4TVs, 2 network printers, a server used mainly as storage server and a DVR. I'd prefer an Ethernet router with additional APs. to cover the areas where I need wifi. I'm using 2 VLANs for two different floors of a house. There are ...
by draid
Wed Aug 22, 2018 8:13 pm
Forum: General
Topic: MikroTik routers question
Replies: 28
Views: 5411

Re: MikroTik routers question

Thank you for the clarification. So basically every Ethernet router is with licence bound to it and there is no need to worry about anything. I've just looked again at the MikroTik site and there aren't a lot of routers. I'd prefer to buy a router with more ports as I'm forced to use two of them as ...
by draid
Wed Aug 22, 2018 5:54 pm
Forum: General
Topic: MikroTik routers question
Replies: 28
Views: 5411

MikroTik routers question

Hello guys, I'm currently using a Tp-Link T480+ Load Balance router but I'd lie if I say I'm happy with it. I want to replace it and I'm really interested in MikroTik routers, however I've never used one and I have few questions about them in general. It would be great if someone will be able to hel...