Community discussions

MikroTik App

Search found 93 matches

by DenisPDA
Fri Mar 29, 2024 11:05 am
Forum: Wireless Networking
Topic: Cube 60Pro ac Max Distance on 60Ghz?
Replies: 16
Views: 3863

Re: Cube 60Pro ac Max Distance on 60Ghz?

Are you shure about that? nRay works muuuuuuch better at 66960. Cube should be the same
Since Cube 60G ac and Cube 60Pro ac are different devices.
Cube 60Pro ac = 802.11ay
Cube 60G ac = 802.11ad
Perhaps 66960 is a more efficient frequency
by DenisPDA
Wed Mar 27, 2024 2:07 pm
Forum: Wireless Networking
Topic: Cube 60Pro ac Max Distance on 60Ghz?
Replies: 16
Views: 3863

Re: Cube 60Pro ac Max Distance on 60Ghz?

The maximum throughput of Cube 60G ac devices (500 meters) is significantly higher at frequencies 58320, 60480 and 62640 MHz - both with unidirectional and bidirectional reception - than at frequencies 64800 and 66000 MHz, and is directly proportional to the obtained maximum channel speeds. Thus, wi...
by DenisPDA
Fri Mar 22, 2024 12:07 pm
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

What's the word these days. I just got asked for a 300 Meter link. Do I tell the installers to caulk the units when they install them? Hi It's hard to say exactly In my experience Of the 4 pieces, only one was securely sealed. I redid everything myself (they have been working for more than 7 months...
by DenisPDA
Thu Dec 21, 2023 5:57 pm
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 257979

Re: v7.13 [stable] is released!

After updating Wireless Wire Cube Pro(CubeG-5ac60aypair) to 7.13, the bridge is no longer available. The 60 GHz link picks up, but the traffic does not run (Access to the Slave is lost). To roll back to 7.12.1, you need to remove the wireless package
by DenisPDA
Fri Nov 24, 2023 12:07 pm
Forum: Announcements
Topic: v7.13beta [testing] is released!
Replies: 467
Views: 88999

Re: v7.13beta [testing] is released!

Problem with CRL update (Next Update)
Now I have to update it with a script
7.13b2.JPG
by DenisPDA
Wed Nov 15, 2023 10:43 am
Forum: Announcements
Topic: v7.13beta [testing] is released!
Replies: 467
Views: 88999

Re: v7.13beta [testing] is released!

What's new in 7.13beta2 (2023-Nov-14 13:04):
7.13b2.JPG
by DenisPDA
Thu Nov 09, 2023 10:46 am
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

The problem is still with us here. Another defective piece again. A complaint is not a solution if it happens again. It is necessary to change the design of the product and make drain holes as it was in previous versions (CubeG) The CubePRO starts to fill with water and as soon as there is so much ...
by DenisPDA
Tue Oct 03, 2023 11:49 am
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

Hi I disassembled another set of Wireless Wire Cube Pro (CubeG-5ac60aypair) And I can draw a certain conclusion From 4 disassembled Cube 60Pro ac devices (CubeG-5ac60ay) Only one had good sealant applied Currently the defect rate is 75% (negligence) Based on the license issue date I can guess that t...
by DenisPDA
Thu Sep 21, 2023 12:02 pm
Forum: Announcements
Topic: v6.49.10 [long-term] is released!
Replies: 33
Views: 83416

Re: v6.49.10 [long-term] is released!

Firmware and Software is on 6.49.10 .. ist there a way back for both ? or is only a software rollback necessary ? (sorry, it is my first time for a potential rollback) :-) First, contact support and find out what exactly the problem is. (support@mikrotik.com or https://help.mikrotik.com/servicedesk...
by DenisPDA
Thu Sep 21, 2023 11:40 am
Forum: Wireless Networking
Topic: Cube Pro 60ac disable LEDs and GPS
Replies: 3
Views: 2545

Re: Cube Pro 60ac disable LEDs and GPS

Great, the 1h delay feature is awesome. Whats about GPS? Found no option in WebFig
Your GPS works on Cube Pro 60ac ???
by DenisPDA
Thu Sep 21, 2023 11:19 am
Forum: Announcements
Topic: v6.49.10 [long-term] is released!
Replies: 33
Views: 83416

Re: v6.49.10 [long-term] is released!

Hello Since 6.49.10 i have troubles streaming my Cams in Homekit when i am outside from my Home (i.e. LTE or external WLAN). Can this caused by the new enhancement: "www - improved service stability when receiving malformed packets;" ? br, Richard Everything is possible. Since there is no...
by DenisPDA
Tue Sep 19, 2023 11:49 am
Forum: Wireless Networking
Topic: Cube 60Pro link up, link down
Replies: 3
Views: 1370

Re: Cube 60Pro link up, link down

/interface w60g set [ find ] disabled=no isolate-stations=no mode=station-bridge name=wlan60-1 put-stations-in-bridge=bridge \ region=usa scan-list=64800 ssid=MikroTik-629[/code] Hi 1 should not be used put-stations-in-bridge=bridge You have already added an interface to Bonding 2 also I would try ...
by DenisPDA
Mon Sep 18, 2023 11:05 am
Forum: Announcements
Topic: v6.49.10 [long-term] is released!
Replies: 33
Views: 83416

Re: v6.49.10 [long-term] is released!

Back when 6.49.10 was stable
I got errors on the interfaces on my RB4011 (Rx Code Error)
And accordingly the interfaces jumped Down/Up
Rolled back to 6.49.8, and the problem went away

Perhaps this is an individual case
by DenisPDA
Fri Sep 15, 2023 2:42 pm
Forum: Wireless Networking
Topic: PtP Bridge Alignment 60 GHz (CubeG-5ac60ay)
Replies: 2
Views: 2308

Re: Aligning Cube 60 GHz (CubeG-5ac60ay)

Unfortunately, there is very little information about 60 GHz on wiki.mikrotik.com and help.mikrotik.com/docs
The adjustment process is especially interesting (alignment)
by DenisPDA
Fri Sep 15, 2023 12:07 pm
Forum: Wireless Networking
Topic: PtP Bridge Alignment 60 GHz (CubeG-5ac60ay)
Replies: 2
Views: 2308

PtP Bridge Alignment 60 GHz (CubeG-5ac60ay)

Hi, As I understand When adjusting ptp 60 GHz, you need to block the tx-sector in the central part (sector 27,28,35,36). Example (Master and Slave) /interface/w60g/set wlan60-1 tx-sector=35 https://i.postimg.cc/V6864FYP/sector-60.jpg For alignment use Align (Master and Slave) /interface/w60g/align w...
by DenisPDA
Wed Sep 13, 2023 2:12 pm
Forum: Wireless Networking
Topic: Cube 60Pro - Real world range/reliability/alignment
Replies: 8
Views: 3193

Re: Cube 60Pro - Real world range/reliability/alignment

why is there such big latency on PTMP setup ? anyone has a knowledge ?
Hi
Try turning w60g interface off and on (ap bridge)

For example
/interface/w60g/disable wlan60-1
delay 8
/interface/w60g/enable wlan60-1
by DenisPDA
Wed Sep 13, 2023 10:42 am
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

Greetings to all
I restored the seal of the device Cube 60Pro ac (CubeG-5ac60ay) myself
I used SILICONE SEALANT GASKET (automotive)
MUST be neutral to oxidation, metal and electricity

Was only black
CubeG-5ac60ay_6.jpeg
by DenisPDA
Tue Sep 05, 2023 3:07 pm
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

Installed 1 week ago.

Unit is completely shorted out.
I took apart two CubeG-5ac60ay devices
And the sealant is poorly applied on two devices
Partially (in some places) the sealant is completely missing
CubeG-5ac60ay_5.jpeg
by DenisPDA
Mon Sep 04, 2023 9:10 pm
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

Installed 1 week ago.

Unit is completely shorted out.
Very sad
Request RMA
support@mikrotik.com or https://help.mikrotik.com/servicedesk/
by DenisPDA
Sat Sep 02, 2023 5:12 pm
Forum: Wireless Networking
Topic: Cube Pro 60ac disable LEDs and GPS
Replies: 3
Views: 2545

Re: Cube Pro 60ac disable LEDs and GPS

Hi all,

it's possible to disable all LEDs and GPS?

Thanks!
Yes
System > LEDs > Settings
by DenisPDA
Thu Aug 31, 2023 2:48 pm
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

Once we receive the RMA warranty devices you return to us, our QA team will investigate how to improve manufacturing, so that this does not happen in the future. You can not wait for the return of devices under warranty (RMA) Take 5 devices from different batches and run a quality check. Please not...
by DenisPDA
Thu Aug 31, 2023 2:40 pm
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

I am not saying your issue is insignificant, but statistically a few people on a forum says nothing about the tens of thousands of units that are operational and without issue. I have one big request to you Pay more attention to Cube series Build, quality, issues, bugs (core) I have a lot of Mikrot...
by DenisPDA
Thu Aug 31, 2023 2:27 pm
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

Like I said above already, if you have received a defective device, please submit to RMA. This does not say anything about overall quality of Mikrotik products or other Cube units. In this case, I'm not the only one with this problem. Also on the forum there are enough open topics with the problem ...
by DenisPDA
Thu Aug 31, 2023 1:52 pm
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

Since support sent me to contact the warranty and request an RMA, I performed the preparation (Disassembly) of the CubeG-5ac60ay And as you can see in the photo, the sealant is poorly applied on the side where the antennas are Water can get in there. CubeG-5ac60ay_4.jpeg CubeG-5ac60ay_1.jpeg CubeG-5...
by DenisPDA
Thu Aug 31, 2023 11:12 am
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

Poor sealing is not for pouring rain ....
I want to wait for a response from Mikrotik and support
Otherwise I will have to use "Moisture Resistant Silicone Sealant"
by DenisPDA
Thu Aug 31, 2023 11:04 am
Forum: Wireless Networking
Topic: CubeSA 60Pro ac - kernel failure
Replies: 10
Views: 3702

Re: CubeSA 60Pro ac - kernel failure

Why so many problems with the new Cube series ????
1 CubeSA 60Pro ac - kernel failure
2 CubeSA 60Pro WATER DANGER viewtopic.php?t=189614
3 CubeSA 60Pro ac: 60Ghz clients flapping viewtopic.php?t=188600
by DenisPDA
Thu Aug 31, 2023 10:58 am
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

What a timing, I've just installed the Cube60Pro for the first time (a client, with the plan to replace the wAP60 sector with the CubeSA 60Pro) and now read this thread.
Poor seal in the center
111.jpeg
222.jpeg
by DenisPDA
Wed Aug 30, 2023 5:48 pm
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

I'm sorry you experienced such issue. If there is any damage, as with any device, please submit to warranty for repair or replacement. We will investigate is this is a manufacturing defect in the specific unit, or if there is room for improvement in the future design of the device. What to do for t...
by DenisPDA
Wed Aug 30, 2023 12:08 pm
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

I asked support for comment
But I'm not sure if it will be fast.
MikroTik support #[SUP-126535]
by DenisPDA
Tue Aug 29, 2023 11:09 pm
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

@normis
@sergejs

Someone from the representatives of Mikrotik can comment on ???
by DenisPDA
Tue Aug 29, 2023 9:28 pm
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

Could it be something to do with condensation or just a bad seal?
by DenisPDA
Tue Aug 29, 2023 9:07 pm
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER

Yes, we also have water problems. Both CubePRO and CubeSA have problems. Unfortunately, it does not flow there through a grommet, but through poor-quality gluing. Since the antennas have no drain , water accumulates inside. Bad design! :shock: Previous versions (WAP60) were better in terms of rain ...
by DenisPDA
Tue Aug 29, 2023 5:23 pm
Forum: Wireless Networking
Topic: CubeSA 60Pro ac: 60Ghz clients flapping
Replies: 105
Views: 21821

Re: CubeSA 60Pro ac: 60Ghz clients flapping

I came across the CubeSA 60Pro WATER DANGER theme viewtopic.php?t=189614
Can someone comment???
Who has a long history of using the Cube 60Pro (CubeG-5ac60ay)?
by DenisPDA
Tue Aug 29, 2023 5:20 pm
Forum: Wireless Networking
Topic: CubeSA 60Pro ac: 60Ghz clients flapping
Replies: 105
Views: 21821

Re: CubeSA 60Pro ac: 60Ghz clients flapping

And one more problem what is happening to us. Observed on multiple versions including 7.11. For some clients, the speed gets stuck at 385Mbps - MCS0. They do not display RSSI, TX sector, RX sector and TX sector info. After disconnecting and connecting the client, everything is ok again. It doesn't ...
by DenisPDA
Tue Aug 29, 2023 2:31 pm
Forum: RouterBOARD hardware
Topic: CubeSA 60Pro WATER DANGER
Replies: 44
Views: 10739

Re: CubeSA 60Pro WATER DANGER


it is dead and replaced by another one... I understand that you will suffer the same problem
@enlace101

Hello
Can you tell in more detail what happened (where and how the water got in)
Possibly disassembly photos
I will be very grateful to you
Thank you
by DenisPDA
Thu Jul 20, 2023 12:24 pm
Forum: Announcements
Topic: v6.49.8 [long-term] is released!
Replies: 49
Views: 67985

Re: v6.49.8 [long-term] is released!

If its the case, it needs to be fixed. It seems that you need a user that do have right to log inn to the router to use this vulnerability. But I do not feel any pity for user leaving Winbox or HTTP admin gui open to the pubic. Sometimes you have to give limited access to contractors, and I don't w...
by DenisPDA
Thu Jul 20, 2023 12:02 pm
Forum: Announcements
Topic: v6.49.8 [long-term] is released!
Replies: 49
Views: 67985

Re: v6.49.8 [stable] is released!

ROS 6 CVE-2023-30799
https://nvd.nist.gov/vuln/detail/CVE-2023-30799
Actual ???
So the vulnerability is relevant in v6.49.8 ????
by DenisPDA
Thu Jul 20, 2023 11:17 am
Forum: Announcements
Topic: v6.48.7 [long-term] is released!
Replies: 11
Views: 27159

Re: v6.48.7 [long-term] is released!

Why duplicate posts?
For Mikrotik employees to pay attention
by DenisPDA
Thu Jul 20, 2023 10:52 am
Forum: Announcements
Topic: v6.48.7 [long-term] is released!
Replies: 11
Views: 27159

Re: v6.48.7 [long-term] is released!

ROS 6 CVE-2023-30799
https://nvd.nist.gov/vuln/detail/CVE-2023-30799
Actual ???
by DenisPDA
Thu Jul 20, 2023 10:52 am
Forum: Announcements
Topic: v6.49.8 [long-term] is released!
Replies: 49
Views: 67985

Re: v6.49.8 [stable] is released!

ROS 6 CVE-2023-30799
https://nvd.nist.gov/vuln/detail/CVE-2023-30799
Actual ???
by DenisPDA
Fri Feb 10, 2023 10:35 am
Forum: Announcements
Topic: v7.8rc is released!
Replies: 125
Views: 44797

Re: v7.8rc is released!

Still a real problem
Looks like DoH prioritization was broken
viewtopic.php?t=192810#p982705
by DenisPDA
Tue Feb 07, 2023 2:14 pm
Forum: Announcements
Topic: v7.8beta [testing] is released!
Replies: 307
Views: 73334

Re: v7.8beta [testing] is released!

Looks like DoH prioritization was broken in 7.8beta3
MT_DoH.JPG
by DenisPDA
Tue Dec 06, 2022 1:19 pm
Forum: Announcements
Topic: v7.7beta [testing] is released!
Replies: 322
Views: 123651

Re: v7.7beta [testing] is released!

It works for me between StrongSwan 5.9.8 on Ubuntu and RouterOS
StrongSwan Android Client 2.3.3
Log ROS
log.1.txt
by DenisPDA
Mon Dec 05, 2022 1:27 pm
Forum: Announcements
Topic: v7.7beta [testing] is released!
Replies: 322
Views: 123651

Re: v7.7beta [testing] is released!

What's new in 7.7beta6 (2022-Nov-04 15:59): *) ike2 - added support for ChaChaPoly1305 encryption (CLI only); *) ike2 - added support for DH Group 31 (EC25519) (CLI only); Hi all! Has anyone tried using ChaChaPoly1305 IKEv2? strongswan customer goes crazy Log Dec 5 14:37:23 00[DMN] +-+-+-+-+-+-+-+-...
by DenisPDA
Wed Oct 26, 2022 1:59 pm
Forum: Announcements
Topic: v7.6 [stable] is released!
Replies: 279
Views: 142581

Re: v7.6 [stable] is released!

Please send or post supout.rif file. Maybe we can see a little more from the file
supout.zip
by DenisPDA
Wed Oct 26, 2022 1:20 pm
Forum: Announcements
Topic: v7.6 [stable] is released!
Replies: 279
Views: 142581

Re: v7.6 [stable] is released!

Why such loading at an empty configuration????
hex_7.6.JPG
hex_7.6_2.JPG
What was done
1. Full configuration reset
2. Netinstall
Problem persists
by DenisPDA
Thu Oct 13, 2022 4:43 pm
Forum: Announcements
Topic: v6.49.6 [stable] is released!
Replies: 56
Views: 84906

Re: v6.49.6 [stable] is released!

Release 6.49.7 What's new in 6.49.7 (2022-Oct-11 17:37): *) branding - fixed execution of "autorun.scr" file when installing branding package (introduced in v6.47); *) routerboot - prevent enabling "protected-routerboot" on unsupported factory firmware versions; *) routerboot - ...
by DenisPDA
Thu Jun 16, 2022 5:02 pm
Forum: Announcements
Topic: v7.4beta [testing] is released!
Replies: 189
Views: 61097

Re: v7.4beta [testing] is released!

Two quick questions about containers:

1) are veth interfaces mandatory, or can host networking be used?
2) the docs state that ext4 is supported, is this new? Any plans to add ext4 support to Disks > Format Drive?
7.4b4_ext4.JPG
by DenisPDA
Fri Apr 15, 2022 10:12 am
Forum: Announcements
Topic: v7.3rc [testing] is released!
Replies: 452
Views: 102652

Re: v7.3beta [testing] is released!

7.3beta33 MT killer
CHR - Kernel panic
hap ac2 - unable to load configuration
by DenisPDA
Tue Apr 05, 2022 6:15 pm
Forum: Announcements
Topic: Missing RouterOS configuration after a reboot on very rare occasions [SOLVED]
Replies: 73
Views: 35508

Re: Missing RouterOS configuration after a reboot on very rare occasions [SOLVED]

There are some changes in the .fwf files (RouterBoard Firmware) but that's it.

Возможно проблема в RouterBoard Firmware
There may be a problem with the RouterBoard Firmware
by DenisPDA
Tue Apr 05, 2022 5:08 pm
Forum: Announcements
Topic: v7.2 is released!
Replies: 359
Views: 61079

Re: v7.2 is released!

hap ac2 weird error
After upgrading from version 7.2rc7 to version 7.2 stable
Interface ETH2 log and status says it was powered on for 1 second
In fact, the cable is physically missing
hAP_AC2_up_7.2rc7_to_7.2_stable.JPG
by DenisPDA
Tue Apr 05, 2022 2:22 pm
Forum: Announcements
Topic: v7.2 is released!
Replies: 359
Views: 61079

Re: v7.2 is released!

Hi
What do you think about it ?
Missing RouterOS configuration after a reboot on very rare occasions
viewtopic.php?t=184711#p923967
by DenisPDA
Thu Feb 10, 2022 12:37 pm
Forum: Announcements
Topic: v7.1.2 is released!
Replies: 127
Views: 39123

Re: v7.1.2 is released!

There is a glitch
by DenisPDA
Wed Dec 08, 2021 11:05 am
Forum: Announcements
Topic: v6.48.6 [long-term] is released!
Replies: 126
Views: 274272

Re: v6.48.6 [long-term] is released!

i was using accept in dst address in NAT for local ip tv to make ip tv see all users ip address after update to 6.48.6 i cant open ip tv downgade fix it or remove accept rule and use !dst address in Masquerade rule, what makes this happen ?
Something strange with multicast
by DenisPDA
Wed Nov 17, 2021 3:56 pm
Forum: Announcements
Topic: v6.49.1 [stable] is released!
Replies: 138
Views: 80615

Re: v6.49.1 [stable] is released!

MT_6.49.1.JPG
by DenisPDA
Fri Nov 12, 2021 2:38 pm
Forum: RouterOS beta
Topic: v7.1rc6 [development] is released!
Replies: 145
Views: 56360

Re: v7.1rc6 [development] is released!

It is very worrying to take it to a mountain more than 100 kilometers away and that the electricity goes away and does not return until someone goes to turn it on again Simple solution: Do not use beta software in production. This is by definition not possible. RB5009UG+S+IN Operating System: Route...
by DenisPDA
Mon Feb 08, 2021 2:46 pm
Forum: Announcements
Topic: v6.48.1 [stable] is released!
Replies: 103
Views: 60300

Re: v6.48.1 [stable] is released!

you should not use that as only defense,
you should use firewall rules to protect your management interfaces
What do you mean shouldn't ???
What is this option for then ???
by DenisPDA
Sat May 09, 2020 12:05 pm
Forum: Announcements
Topic: v6.45.9 [long-term] is released!
Replies: 82
Views: 93495

Re: v6.45.9 [long-term] is released!


What meen this? I dont understand.. Improvment or downgrade from what version? Explain.
Clear improvement regarding LT 6.44.6
by DenisPDA
Sat May 09, 2020 1:38 am
Forum: Announcements
Topic: v6.45.9 [long-term] is released!
Replies: 82
Views: 93495

Re: v6.45.9 [long-term] is released!

hAP ac² + Dell Vostro 7590 (Intel® Wireless-AC 9560)
by DenisPDA
Fri Mar 20, 2020 11:24 pm
Forum: Announcements
Topic: v6.47beta [testing] is released!
Replies: 269
Views: 179794

Re: v6.47beta [testing] is released!

Work https://cloudflare-dns.com/dns-query
DoH_MT.JPG
DoH_MT_check.JPG
chrome_doh.JPG
Cert CA
Check_Cloud.JPG
Check_Doh.JPG
check_dns2.JPG
Everything works
Mikrotik Thank you so much
by DenisPDA
Thu Mar 12, 2020 11:43 am
Forum: Announcements
Topic: Winbox v3.22 released!
Replies: 117
Views: 84568

Re: Winbox v3.22 released!

I confirm session windows inside main winbox windows are saved but their size seams to be restored to a kind of default preset size at each start first start windows set up https://i.imgur.com/FfxqBZj.png on new session, also the same on winbox restart https://i.imgur.com/RtkFiTT.png Enable Autosav...
by DenisPDA
Thu Feb 27, 2020 12:33 pm
Forum: Announcements
Topic: v6.46.4 [stable] is released!
Replies: 106
Views: 77708

Re: v6.46.4 [stable] is released!

Fixed problem with freezing on ARM in v6.46.4 ???
by DenisPDA
Mon Feb 03, 2020 4:50 pm
Forum: Announcements
Topic: v6.45.8 [long-term] is released!
Replies: 86
Views: 91631

Re: v6.45.8 [long-term] is released!

hap ac2 hovered twice a day
rb4011 received a critical error and was rebooted
33333.JPG
by DenisPDA
Tue Sep 10, 2019 10:54 am
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 613
Views: 256204

Re: RouterOS v7.0 beta1 - when?

IMG_20190910_001102_513.jpg
You can share the source (url) of the changelog?
by DenisPDA
Fri Sep 06, 2019 3:07 pm
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 203
Views: 101160

Re: RouterOS v7.0beta1 (ARM)

Added ext4 support ? [admin@MikroTik] > sys reso print uptime: 2m16s version: 7.0beta1 (development) build-time: Sep/05/2019 15:08:48 [admin@MikroTik] /disk> format-drive file-system= ext3 fat32 i guess not. One thing is user-land tool to format drive. Another thing is plugging USB stick already fo...
by DenisPDA
Fri Sep 06, 2019 1:59 pm
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 203
Views: 101160

Re: RouterOS v7.0beta1 (ARM)

I imagine people are going to freak about this
/interface/ovpn-server/server/set protocol=udp
@doneware

Added support UDP OVPN ?
by DenisPDA
Fri Sep 06, 2019 1:14 pm
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 203
Views: 101160

Re: RouterOS v7.0beta1 (ARM)

after installing this release on CRS317 lost connectivity via SFP
SFP page shows only module present
after downgrading to 46beta38 SFP shows all info, signal strenght but no link
RouterOS v7 beta
Only for hap ac2, wap ac
by DenisPDA
Fri Sep 06, 2019 12:36 pm
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 203
Views: 101160

Re: RouterOS v7.0beta1 (ARM)

Added ext4 support ?
by DenisPDA
Fri Sep 06, 2019 12:10 pm
Forum: Announcements
Topic: v6.45.5 [stable] is released!
Replies: 53
Views: 49367

Re: v6.45.5 [stable] is released!

viewtopic.php?f=19&t=151903
RouterOS v7 beta
http://mt.lv/v7
Only for hap ac2, wap ac
by DenisPDA
Fri Sep 06, 2019 12:09 pm
Forum: Announcements
Topic: v6.44.5 [long-term] is released!
Replies: 100
Views: 84839

Re: v6.44.5 [long-term] is released!

viewtopic.php?f=19&t=151903
RouterOS v7 beta
http://mt.lv/v7
Only for hap ac2, wap ac
by DenisPDA
Wed Jul 24, 2019 12:18 pm
Forum: Announcements
Topic: v6.45.2 [stable] is released!
Replies: 205
Views: 86977

Re: v6.45.2 [stable] is released!

Hello, i just bought 2 hap ac^2 on one the wifi 5ghz was working on the other one, the network sometimes didnt show up . if it was visible to my laptop i couldnt connect. I saw, that one was runing with 6.45.1 (this one was ok) and the other one with 6.45.2 had this problems. will there be a fix? k...
by DenisPDA
Mon Jul 22, 2019 11:33 pm
Forum: Announcements
Topic: v6.45.2 [stable] is released!
Replies: 205
Views: 86977

Re: v6.45.2 [stable] is released!

hAP lite has 32MB ram 16MB flash No way to update after deleting all files and rebooted more than once (had to try netinstall yet). The winbox method system->packages>CheckForUpdates, finds new version but "download and install button" refuses to appear (likely because of space issue). Pr...
by DenisPDA
Wed Jul 10, 2019 11:04 am
Forum: Announcements
Topic: v6.44.5 [long-term] is released!
Replies: 100
Views: 84839

Re: v6.44.5 [long-term] is released!

I don't fly into space, though :)
You are not posting the full list of changes.
:(
by DenisPDA
Wed Jul 10, 2019 10:18 am
Forum: Announcements
Topic: v6.44.5 [long-term] is released!
Replies: 100
Views: 84839

Re: v6.44.5 [long-term] is released!

How do you guys propose we make such a changelog? This is the long term branch, where releases are very rare, and the jumps are very big. Imagine there could be 15 fixes, new bugs, fixes again, then the feature could be already removed, then a new one added, removed again, and then a new feature ma...
by DenisPDA
Tue Jul 09, 2019 10:00 pm
Forum: Announcements
Topic: v6.44.5 [long-term] is released!
Replies: 100
Views: 84839

Re: v6.44.5 [long-term] is released!

Your image is corrupted :)
corrected ;)
by DenisPDA
Tue Jul 09, 2019 9:30 pm
Forum: Announcements
Topic: v6.44.5 [long-term] is released!
Replies: 100
Views: 84839

Re: v6.44.5 [long-term] is released!

File from 159.148.147.204 is corrupted.
https://159.148.172.226/routeros/6.44.5 ... 6.44.5.zip seems ok.
confirm
Net_6445.JPG
by DenisPDA
Tue Jul 09, 2019 5:07 pm
Forum: Announcements
Topic: v6.44.5 [long-term] is released!
Replies: 100
Views: 84839

Re: v6.44.5 [long-term] is released!

The [netinstall-6.44.5.zip] seems corrupted, please confirm ..thanks
Try using Mozilla Firefox to download a netinstall 6.44.5
https://download.mikrotik.com/routeros/6.44.5/netinstall-6.44.5.zip
by DenisPDA
Tue Jul 09, 2019 3:54 pm
Forum: Announcements
Topic: v6.44.5 [long-term] is released!
Replies: 100
Views: 84839

Re: v6.44.5 [long-term] is released!

karlisi, it is hard to judge about proper and improper ways for changelogs syntax. However, we will try to improve it for the next versions, thank you for the report.
It is enough to lay out the full list of changes v6.44.5 relative to 6.43.16 long-term
by DenisPDA
Tue Jul 09, 2019 1:58 pm
Forum: Announcements
Topic: v6.44.5 [long-term] is released!
Replies: 100
Views: 84839

Re: v6.44.5 [long-term] is released!

upgrading from 6.43.16 to 6.44.5
lost users /ip ipsec user
Where to looking for ?
by DenisPDA
Tue Jul 09, 2019 1:39 pm
Forum: Announcements
Topic: v6.44.5 [long-term] is released!
Replies: 100
Views: 84839

Re: v6.44.5 [long-term] is released!

after upgrading from 6.43.16 to 6.44.5 ipsec dropped
/ ip ipsec identity
add peer = peer1 became one for all connections
by DenisPDA
Sun Mar 10, 2019 8:40 am
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96604

Re: v6.44 [stable] is released!

Static host route is very unreliable in this release. I have a web server that I need to reach through another gateway and it works sporadically.

I didn't count but it works approx. 30 seconds and then a timeout for 30 seconds and so on.
I confirm
This is a firewall problem.
by DenisPDA
Sat Mar 09, 2019 10:29 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96604

Re: v6.44 [stable] is released!

Hi, I have noticed on this forum that many times the problem is not due to updates, but in fact due to incorrect configurations. Maybe a suggestion will be to engage with one of your registered dealers / re-sellers which are also Mikrotik Certified to look into the issue (I am both). This way the M...
by DenisPDA
Tue Mar 05, 2019 2:26 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96604

Re: v6.44 [stable] is released!

Maybe it could be related to the bug that I reported above? (loose TCP connection tracking no longer works) It could be that there were changes in the connection tracking firewall that have side effects like this. I can say with complete confidence that on average I have 15% fewer connections. (6.44)
by DenisPDA
Tue Mar 05, 2019 1:53 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96604

Re: v6.44 [stable] is released!

Hi Since the last update we have had multiple clients complaining about existing sites where VoIP experiences issues, from de-registration, no audio, one way audio. Currently we downgrading the clients back to 6.43.8 which works. I've sent multiple supouts and support tickets to Support with no fee...
by DenisPDA
Tue Mar 05, 2019 1:10 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96604

Re: v6.44 [stable] is released!

Hi Since the last update we have had multiple clients complaining about existing sites where VoIP experiences issues, from de-registration, no audio, one way audio. Currently we downgrading the clients back to 6.43.8 which works. I've sent multiple supouts and support tickets to Support with no fee...
by DenisPDA
Wed Feb 27, 2019 1:06 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96604

Re: v6.44 [stable] is released!

ROS 6.44. When exporting
/ip neighbor discovery-settings
, inversion is not taken into account. Be careful!
ROS_6.44_neighbor.jpg
by DenisPDA
Tue Feb 26, 2019 5:23 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96604

Re: v6.44 [stable] is released!


I did it both ways......... will i have to watch something happens after or just install and go on? What exactly do this package? The scipt is other way to install it or is the only way?
Corrects a memory full error.
download/file.php?id=35767
by DenisPDA
Tue Feb 26, 2019 5:13 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96604

Re: v6.44 [stable] is released!

problem( fix_space.zip inside flash folder or outside and reboot? Which is the right one place to put it? In my cases it didn't matter. But I think better flash folder #!/bin/bash if [ "$bootimage" != "1" ]; then rm -f /flash/bootimage; fi mv /var/pdb/fix-space/image /tmp rm -rf...
by DenisPDA
Tue Feb 26, 2019 4:30 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96604

Re: v6.44 [stable] is released!

problem(
fix_space.zip
by DenisPDA
Tue Feb 26, 2019 4:15 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 218
Views: 96604

Re: v6.44 [stable] is released!

updated a CCR1009 from 6.43.12 to 6.44 -> Lost connectivity on all eoip (ipsec) interfaces.
Create a rule in input chains for ipsec
by DenisPDA
Mon Feb 18, 2019 11:12 am
Forum: Announcements
Topic: v6.44rc [testing] is released!
Replies: 67
Views: 37314

Re: v6.44rc [testing] is released!

Hi there,

I see v6.44rc doesn't have the IPSec policy option to "tunnel" as compared to the previous versions eg. v6.43.2.

Why is this?
ipsec_mt.JPG
by DenisPDA
Thu Sep 20, 2018 4:29 pm
Forum: Announcements
Topic: v6.43.1 [stable] and v6.43.2 [stable] are released!
Replies: 186
Views: 85192

Re: v6.43.1 [stable] is released!

New update ???

What's new in 6.43.2 (2018-Sep-18 12:12):

Changes in this release:

*) routerboot - fixed RouterOS booting on devices with particular NAND memory (introduced in v6.43);
by DenisPDA
Mon Sep 10, 2018 11:08 pm
Forum: Announcements
Topic: v6.43 [current] is released!
Replies: 147
Views: 70843

Re: v6.43 [current] is released!

After updating on all my devices I see such a picture. https://forum.mikrotik.com/download/file.php?mode=view&id=33580 https://forum.mikrotik.com/download/file.php?mode=view&id=33579 Similar problem + broken default script hAP AC 6.42.7 > 6.43 MT_6.43.jpg default_script_6.43_bad.txt script_...