MikroTik

pothi

External (5G NR) devices are usually deployed in remote areas where the connectivity is less than optimal. In that case, what's the difference between LTE and NR technologies in terms of coverage? Does LTE have an upper edge or NR? Or does the coverage depend largely on the band (or frequency)?

pothi

Thanks. Unfortunately, it didn't work. So, the data is stored somewhere else.

pothi

I usually reset some of the statistics of the my hAP AC2 router using the following command (run via a scheduler / cron)... /interface reset-counters [find]; The above command works and resets the statistics of all interfaces listed at /interface print . However, I see that statistics of connected d...

pothi

Upgraded hapAC2 and SXT LTE. No new issues.

ssh - added support for user ed25519 public keys;

Thanks for the added support for ed25519 keys for user authentication.

pothi

@pe1chl Good point.

Understood how things work behind the scene.

pothi

Since, it was bought only a month ago, I'd contact the local dealer / distributor to see if they can do anything to fix or replace the device. Usually, the dealers / distributors are supportive in such cases. If they aren't, do not hesitate to escalate the issue to mikrotik support . This forum is m...

pothi

@deanMK no issues so far from my limited testing with this version on hAP AX3.

pothi

ssh - added support for user ed25519 public keys;

Thanks. Been waiting for long.

pothi

@hunte88 Not in the alerts tab. But, in IP => DHCP-server => DHCP. Click on the dhcp-server that assigns the IP addresses. Then look for the script box in the end.

It's also called as lease-script. Ref: https://help.mikrotik.com/docs/display/ ... Properties

pothi

My perfect travel router. Can't wait to buy one. Cheaper than using a phone with hotspot.

pothi

+1 for the suggestions by @thims .

pothi

Subscribed long ago! :) Thanks for another LTE video.

pothi

+1 for a friendly name that can be used across Router OS.

pothi

I'd request to bring outdoor LTE devices with increased storage to fit RouterOS v7, ZeroTier, or any future capabilities. Currently, all outdoor LTE devices by MikroTik have limited disk space (16MB).

pothi

Same issue with all outdoor LTE products launched so far. I hope MikroTik provides more storage to future products.

pothi

+1 for 464XLAT support, please.

pothi

I saw this thread only today. Thanks for all the efforts by the team behind MikroTik!

pothi

Why don't you just close this topic so that no one else could reply?

We already have another topic if someone wants to discuss the specific security issue.

pothi

Thanks for the heads-up. Updated to 7.9.1 . Awaiting other versions. I can wait, as I don't use IPv6. Where I have IPv6 enabled, I have not configured such specific settings. The vendor may have met with someone who is a Mikrotik distributor or a trainer. Or simply a Mikrotik user who used Mikrotik ...

pothi

@ttrs I use hAP ax2 too. Wifi works fine for clients. I don't use capsman, though.

pothi

Followed. Good to see your team in Mastodon.

pothi

What are the reasons to dislike Discourse?

pothi

Can't wait to test it on my LTE device.

@stathismes didn't you read the last line of the post?

Please keep this forum topic strictly related to this particular RouterOS release.

pothi

+1 for RAMdisk!

pothi

Same issue. Thanks @nagylzs for creating this topic and thanks to @eworm for sharing the solution. @mt99 That's a nice tip too! Here's the one-liner that I did to automate it in Ubuntu 22.04 and in future Ubuntu versions... echo "PubkeyAcceptedAlgorithms +ssh-rsa" | sudo tee /etc/ssh/ssh_c...

pothi

ssh - added support for Ed25519 key exchange;

While I am okay with RSA, I've been waiting for this for a long time to streamline part of my work. Thank you for adding support to ed25519 format.

pothi

No issues with this particular device (hAP ax²). Tested with Mac book air and iPad.

pothi

Thanks. After reading your post, just saw the fix in 7.7beta3.

pothi

I use Amazon SES to send emails using SMTP. Works well on both v7 and v6 stable versions. Did you try debugging the issue with... /system logging add topics=e-mail /log print follow-only # on a separate terminal, please execute the following command to send a test email # please use an actual email ...

pothi

That is indeed an interesting device. A good toolkit to have for any network admin along with MQS . The following quoted text was taken from Woobm quick guide ... The Woobm is a WiFi-to-serial bridge. This device enables wireless access to RouterBOARD devices which have a USB port, but do not have w...

pothi

I doubt between buying hAP ax2 now or waiting for hAP ax3. I don't need USB or CPU running at the max clock, however, the coverage zone should not be worse than currently with hAP ac2. I own both hAP ac2 and hAP ax2. Coverage zone by ax2 is not worse than ac2, both theoretically and practically. I ...

pothi

Btw, I am probably color blind. So, the "edit" icon isn't visible clearly with dark mode turned off. It is *somewhat visible* in the screenshot that I attached, though. With dark-mode turned on (with inverted color scheme), it becomes clearly visible (as can be seen in the screenshot attac...

pothi

Oh!!! I didn't know that. Now, I was able to delete the old saved items by dragging to the left. Thank you!

pothi

ATL LTE18 kit is probably the best LTE product available right now. Supports B3/B7/B8.

And maybe a mANT LTE 5o antenna to improve the connection further. As I understand the antenna is 360 wide

This is new info to me. Thanks.

pothi

Hello, I was in a situation to update the password for an existing saved login. While I could save a new login, I could not delete an existing saved login credentials. https://live.staticflickr.com/65535/52483416453_75fff7bf7f_o.jpg In Android app, I could click an icon next the saved login and then...

pothi

The bug still exists as of v7.6.

@jhbarrantes did you send the ticket?

pothi

Finally, I was able to test drive. PoE out of hAP ax² can supply enough power to SXT LTE Kit. Couldn't be happier with the upgraded capabilities!

Thanks to @mkx and @biomesh for your inputs!

pothi

Thanks.

I meant that I saw a power supply that is different from what I used to see in other products that I purchased from MikroTik. Anyway, I received the official reply from MikroTik. It seems that it is indeed *supplied* by MikroTik due to *regulations* in India.

pothi

I received the product only today. Upon unboxing it, I got a shock of my life. I received a power supply that is not made by MikroTik. I can't use a product that I eagerly waited for! :( https://live.staticflickr.com/65535/52476617065_41873c78ae_b.jpg https://live.staticflickr.com/65535/52476166901_...

pothi

Yes. Chateau Is awesome. 90/45mbps is very good. With MikroTik, we always know what’s happening, even when things don’t work. We feel like we are in control on most things. Of course, nothing is perfect as the use-case gets complex.

pothi

Contacted my distributor who was not very sure about it. Then contacted MikroTik official support who confirmed that hAP ax² can power SXT LTE Kit with 10m cable. I will be testing it later today or tomorrow, as I am yet to receive the product. Excited with the new capabilities!

pothi

I need to connect to a base station 1km away but do not have a direct line of sight. My house has well isolated HR++ glass so LTE signal is pretty limited, except for a small window with a plastic plane that just fits a small antenna If the LTE signal is pretty limited, does CAT6 modem help? I pers...

pothi

Thanks for the heads-up. I didn't know an antenna should be grounded. I've been using SXT LTE Kit without ground for months. Current RSSI is -51 dBm on a 3G SIM with speeds varying throughout the day (probably depending on the traffic). Anyway, I am going to try to ground the antenna to check if it ...

pothi

Thanks for the detailed reply. That clarified most things. Currently, I use hAP ac² and SXT LTE Kit with supplied PoE injector. The cable length is 10m. I'm unsure about the quality of the cable, however, I am sure it is not low quality as I didn't buy the cheapest cable available. Looking forward t...

pothi

Mikrotik hAP ax² has PoE-out (and PoE-in) on ether 1. Can it be used to power SXT LTE Kit?

pothi

Updated hAP AC2 from 7.5 to 7.6. No issues so far.

pothi

Updated SXT LTE kit from 6.49.6 to 6.49.7. No new issues found so far.

pothi

*) system - improved handling of user policies; What exactly was improved? I personally have not experienced any problems with user policies I haven’t experienced any issues, either. It may be an improvement that isn’t needed for 99.9999% of the MikroTik devices. It is likely a feature request from...

pothi

@Chiara There is no new scheduler in RouterOS 7.5, as far as I know. Kindly create a support ticket. Support staff may guide you with troubleshooting this specific issue.

pothi

Updated SXT LTE Kit and hAP ac^2 from 6.49.5 to 6.49.6. No issues.

pothi

Updated hAP ac^2 and SXT LTE kit to the latest version. Both have been normal so far.

pothi

You don't have to quote the entire post if you are replying to the previous one. Part of the last post is fine, though. All can understand the context when you reply without quoting the entire previous post.

pothi

Thank goodness. I didn't reset the config since last version due to multiple reasons. I am glad I didn't.

pothi

Okay, thanks for the info. I went ahead with the firmware upgrade. No issues found so far.

pothi

Sorry for hijacking this thread, as I have R11e-LTE modem (on a SXT LTE Kit). I have a script that alerts me when a new firmware-update is available. Installed firmware is MikroTik_CP_2.160.000_v018 . Latest firmware is MikroTik_CP_2.160.000_v020 . Router OS is on 6.49.4 (stable). So, I am looking f...

pothi

Link to fossil scm is broken. Actual URL is... https://fossil-scm.org/

pothi

Updated SXT LTE Kit and hAP ac². No new issues found, yet!

pothi

Thank you, SiB.

Your while loop works. However, I modified it to "do-while" in order to give a second of delay for the email to send to track its progress...

:do { :delay 1s } while=( [/tool e-mail get last-status] = "in-progress" )

pothi

Upgraded hAP ac² from 7.1.1 to this (skipping the previous version). So far so good.

pothi

Seems to be a classic issue. Not working with on SXT Lte Kit (on Router OS version 6.x), but works on hAP ac2 on Router OS version 7.1.1.

pothi

The above statement is true. Particularly, when the mobile operator provides unlimited data, they introduce restrictions such as the above.

pothi

Probably, security updates will continue for sometime. Since these are policy decisions, I expect the change to be slow and a long time will be given before ending development and / or maintenance of v6 branch.

pothi

Updated my hap ac2 both routeros and routerboard firmware.
Any news on wifiwave2 drivers for the ac2 as of yet?

Unfortunately, it may not happen. Please see the requirements at https://help.mikrotik.com/docs/display/ ... quirements .

pothi

When connected to USB is it able to power a sxt with poe? Unfortunately not (I've just tried this). I knew it would be a long shot (and would probably exceed the current that USB can put out) but just wanted to try it anyway. However, the "PoE out" LED still comes on when powering from US...

pothi

*) upgrade - added new "upgrade" channel for upgrades between major versions;

In hAP ac2, I don't see "upgrade" channel after updating to the latest stable (6.49.1). Am I missing something?

pothi

If we have more wireless interfaces (than the default wlan1 and wlan2), then the following code works across the board... :if ([/interface wireless get wlan1 disabled]=no) do={ /interface wireless disable [find] :log info message="Wifi turned off" } else={ /interface wireless enable [find]...

pothi

What's new in 6.41rc21 (2017-Sep-01 08:56):

*) interface - added "/interface reset-counters" command (CLI only);

Awesome. That did reset the counters. A lot of hidden gems to learn.

pothi

Hello, I have a Mikrotik hap ac2 with RouterOS 6.44.1 installed. I use it along with my Belkin ADSL modem-router that is set in bridge mode (acting only as modem, not as router). Internally, it is called as 1483 bridge mode within the modem-router. I use Mikrotik router as pppoe-client to connect to...

pothi

As an administrator, I'd like to have some (or full) control over the traffic, thus favoring DNS over TLS.

As a user, I don't want any control over my internet connection, thus supporting DNS over HTTPS.

Both are better than plain text DNS query.

pothi

Thanks pe1chl for clarifying. I wish there is a way to like a reply when someone provides a solution or the correct answer. Anyway, I've been banging my head with what's going on when I connect more than one client to a VPN server based on l2tp / ipsec. I didn't know it was due to protocol. Time to ...

pothi

Sorry about the delay to respond. For unknown reason, I was unsubscribed from this topic. Subscribed again now. Thanks @sebastia for clarifying. I understand the core concept now (masq is different from routing). I was manually switching the interface to LTE whenever I wanted to upload something. M...

pothi

Thanks @boen_robot .

Your code / answer still works. I had a small but annoying issue upon failover when the existing connections do not switch to the new ISP. Clearing the existing connections using your code solved the issue.

pothi

Also have something missing... /interface list member add comment=defconf interface=bridge list=LAN add comment=defconf interface=ether1 list=WAN Where is your lte? add interface=lte list=WAN ?? I checked again. LTE is indeed missing when I do "/export hide-sensitive". Not sure why Router...

pothi

Thanks for the reply.

I went through the aforementioned article and other relevant articles. From my understanding after reading those, existing sessions (especially from ping or from the same website on the same browser) don't switch to the new ISP after the failover. I may be wrong.

pothi

Hello all, Newbie here. I have Mikrotik hap ac2 with the latest version of Router OS ( version: 6.43.8 ). I have an ADSL connection as primary and LTE connection via Android Tethering as secondary. I route both ADSL and LTE via Mikrotik. I want to use Mikrotik router for failover. Manual failover is...

Search found 75 matches