MikroTik

hkaiser

Hi all, I got on friday my AS-Number and have set up the config on my Mikrotik box(BGP, etc). So everything seems to work, but I have no clue how to test if everything is working fine. How can I test, if some AS-System is announcing my IP's? How can I test my config? How long it takes that all AS-Sy...

hkaiser

Just also adding a +1 to say that I would be happy to see MPTCP support added to RouterOS.

hkaiser

Hi All,

Some news about the netPower switches?

with best regards
HK

hkaiser

Hi,

wAP 60G AP supports up to eight simultaneous clients

Is there a changes that this number will be increased or is this a chipset restriction?

with best regards
HK

hkaiser

Sad that no one answers! No one needs bandwith?

hkaiser

Hi, It would be a good idea to add the project www.wanproxy.org to wirless options for compression in mikrotik wireless systems. By using dictionary compression bandwidth could be much higher, especially in PtMP scenarios. Also in PTP-Links between two mikrotik routers with enough memory, this could...

hkaiser

Hi all,

Is it possible to redirect all customers to non SSL-Connections to youtube? If this would be possible caching would be much more easier! Maybe some one has an idea or solved the problem. thanks in advance

with best regards
HK

hkaiser

When this devices are coming? How long we have to wait? Are there problems with these devices?
thanks in advance.

hkaiser

Hi i have the same problem on ROS 6.41.2, so when this problem will be solved?

hkaiser

Hi,

Some new information about 60 ghz devices?

hkaiser

Normis informed us, that Mikrotik ist investing the implementation von 802.11ad cards to Mikrotik since 2013. Nothing changed since this. I am a constumer since 1997, our whole WISP system and our whole data center is using Mikrotik Hardware. But If Mikrotik will not change something in inplementing...

hkaiser

Does someone have new infos an mikrotik support 802.11ad?

thanks in advance.
hk

hkaiser

Hello!

802.11ad cards support, and GPS syncing would be great!

hkaiser

When will mikrotik support 802.11ad?

thanks in advance.
hk

hkaiser

Hi all,

Since i upgraded to Mikrotik 6.30.2 no old RouterOS Clients(2.9.31) can connect to the AP?
Is this normal or is this bevahior of the AP a bug? Does someone have the same experiences?

thanks in advance.

HK

hkaiser

Hi all,

Thanks for your help. AC-Products do not have 5 and 10 Mhz channels supported, but it is still part of Routeros in this product. Should be disabled by MIKROTIK.

HK

hkaiser

Hi all,

Wanted to use Sxt G-5HPacD with 10 Mhz channels. But in the channel-list is no valid 10 Mhz channel? Is this normal? Does someone have an solution? Thanks in advance.

hk

hkaiser

When will mikrotik support 802.11ad?

thanks in advance.
hk

hkaiser

I would like to know this as well. Please inform us, when Mikrotik will support 802.11.ad?
thanks in advance.

hkaiser

When will mikrotik support 802.11ad?

thanks in advance.
hk

hkaiser

I asked the Mikrotik Support:

Hello,

We are aware of the particular problem, that Dude web-server does not work
properly, when Dude is installed on MikroTik RouterOS.

You have to install Dude server/client on Windows device, if web-server is
necessary.

Regards,

hkaiser

Have the same problem! Everything works perfectly, only Port for webaccess ist not changable and webaccess do not work.(Webaccess is enabled)
Any suggestions? Thank you!

hkaiser

Hi Mikrotik Team, I have a question concerning SMTP Authentication. We habe configured our mail server to work with Dude, but if the mailserver goes offline we will get no emails anymore. So I have thought that it would be good to add an external mail adresse, but Dude is not able to do SMTP-Auth. S...

hkaiser

Hi all, We have one access point, which has strange disconnects of all clients. Because of this I changed cable and CM9 card to another one, but the problem stays the same. Because all clients disconnect which have different versions of MT, I think it is not the reason of the clients. In this moment...

hkaiser

Hi all, Out there are a lot of wishes to support a specific kind of hardware, PCI ADSL, WiMax MiniPCI cards, special radio link cards, etc. I would be a cool feature to create a API, for example in C, to allow customers and developers generate there own drivers for hardware. So a big range of hardwa...

hkaiser

Hi,

Please post your settings.

hkaiser

hkaiser

So I updated to 2.9.12 and changed a lot in configuration. Now I get 15 Mbps out of the link, but not more. I can see now that the link has a signal noise of 58 db. I am using Mikrotik parabolic dishes with 30 dbi and 5m antenna cable. The Signal going up and down slowy. My configuration on these ro...

hkaiser

Hi I have a link over 2 Km with -25 to -30 dbm. In the status field(Tx/RX Rate) in wireless of the winbox, i have standing a 54 Mbps but I get only 2 Mbps through it. What do i do wrong. Thanks for every help!

with best regards
hkaiser

hkaiser

Hi, I have a route network. The gateway to the Internet is 10.10.11.1. All directly connected subnets have through a source nat access to the internet. Now I have an subnet 10.10.13.0/24 which is firstly through a mikrotik router connected to 10.10.12.0/24 trough srcnat and the ip 10.10.12.100 and 1...

hkaiser

Hi,

I tested the antennas and connectors and cables. The antennas receive a signal, but they do not send a signal. I did everything like in the documentation. What can be the problem?
Please help

with best regards,
hkaiser

hkaiser

Hi,

I build a point to point connection. One radio in brigde mode the or in station mode, but i did not get a working connection. So how i can proof if the antennas, the cable and the n. female connector work?
Thanks a lot

hkaiser

hkaiser

Hi all,

I want to put 2 Atx-router in an waterproofed box outside. I would like to know if someone had problems with this setup. No one had problems with condensation water in winter? Please let me know some experiences from your sides.

hkaiser

hkaiser

Hi, Can someone give me a information on this topic. We want to realise also a fullduplex point to point link using a different frequency on the one side and a other on the second side to get this work. Is this possible? The frequency which is possible to set in MikrotikOS is on the TX-frequency or ...

hkaiser

Hi, In my country we have on 5,4-5,7 Ghz a maximum EIRP of 1 Watt. This would be ok if the client stations would not need a much higher EIRP for connections over long distances. So I have thought that the AP could send in the 5,4 GHz band but the client transmit on another frequency. Nearly all freq...

hkaiser

I got the information that the card works from 4.9 Ghz to 6.1 Ghz with the routeros. So could become a got solution!

hkaiser

hkaiser

We are speaking here about Super Range 5! Even if the Super Range 2 has the same chipset as Super Range 5 as I see now!

hkaiser

hkaiser

Hi, On the hompage of the chipset producer is written that the chipset AR5213 of Super Range 5 supports 2,4 Ghz and 5 Ghz.(http://www.atheros.com/pt/AR5004XBulletin.htm) On the hompage of Ubint.net they are only speaking about 5.8 Ghz. I am asking because the 100 mW cards for the 5 Ghz area is not a...

hkaiser

Hi, There is not standing very much information about the Super Range 5 cards on the mikrotik homepage, so I ask here. These cards are only for the 5.8 GHz or is it also possible according to their chip set to use them in 2,4 and 5 Ghz area? Is it also possible to use them with the nstreme protocol?...

hkaiser

Hi,

I am looking for these cards, but everyone who has it in his onlineshop says that it is out of stock. So someone know where to buy these cards?

with best regards
hkaiser

hkaiser

Hi,

There a any changes? There will be support for ADSL with PCI? And if yes in which time period this will be done?

hkaiser

hkaiser

Hi,

There is/will be support for ADSL and DSL PCI modems? And if yes which RouterOS will support? Is there now support for the ADSL/DSL cards in the documentation or not?

with best regards
hkaiser

hkaiser

Would be cool if you could implement the WIMAX protocol in the 5,4 license-free area! Like Proxim do! Are the any efforts to do so?
hkaiser

Search found 42 matches