I just tired to update to 5.2. Now the modem won't boot. My problem is when I hold down the reset button and power on my act light doesn't flash at all, no matter how long i hold the rest button down for. Any ideas

Has this LAC/LNS functionality every been added to the mikrotik routers ? Looks like a few people would like it

Cheers

Anthony

I have 2 DSL connections to the same ISP that connect to the same LNS. The MK is doing the PPPOE connections ( modems are bridged). I am using ECMP to try and balance the outbound load( doesn't work) between the two PPPOE connections and OSPF to load balance the incoming connects ( works) I am not u...

Count me in....If you coming that far across the planet you will want to see sydney

Is the LNS/LAC feature any closers yet ?... Fingers crossed

I have the same issue on two of my PC based routers. One runs around 5% CPU other around 30% CPU. So its not a CPU issue. One is running version 3.30 and the other 4.4 so it's not version. I have also seen the same issue on my 750G At first I thought it must be dropping packets or the interface must...

Is there a way of changing the TCP window size on the MK. I am running BGP between a MK and a Cisco and there is a big difference in the TCP window size sndwnd: = the remote peers TCP window size. rcvwnd: = The local peers TCP window size iss: 2599123019 snduna: 2599145470 sndnxt: 2599145470 sndwnd:...

Count me in

Count me in

I would like the abilty use more of the TOS bits in the QOS setup.
Using IP Precedence and TOS so that other device can pass information thru to the routeros for us to make QOS decisions on

Nice, if we can to have a "save config" command, like cisco routers. All changes in the configuration, will be erased when the router reboot, but the changes can to be permanent if a "save config" command is executed before. Is a well know problem, to lost the remote control (wi...

You mean that those from 192.168.2.0/24 are still required to authenticate? Did you put this rule to "ip hotspot walled-garden" or to "ip hotspot walled-garden ip"? I put then to "ip hotspot walled-garden" , and it works on the test router, but not on the production ro...

In 2.9 hotspot is working completely differently. either "/ip hotspot ip-binding" or "ip hotspot walled-garden ip" is your friend, I suppose. There is a manual for the new hotspot if you want some weekend reading. Looking at the manual, /ip hotspot ip-binding seems to be aim at ...

I have to class C's 192.168.1.x and 192.168.2.x I want 192.168.1.x to alway use the hotspot to authenticate, but I want 192.168.2.x to be router thru the hotspot without the need to authenicate. I see from the posts that in to 2.8 you create a mangle rule to mark the packets, then a firewall rule Is...