Hi,
I have one Arch Linux machine which I need to connect to MikroTik using multiple IP tunnels.
What is the easiest way to do it?
Thanks

Hi,
It is for the exact directive I was looking for.

Thank you!

Thanks for your advice. Yes, I need incoming connections for AnyDesk or TeamViewer in this situation. I don't have the default NAT masquerading rule in order to let machines go through a certain wan-interface. I tried to use two NAT rules with two routing rules, but it seems it depends on which rout...

Hi, While I got help here earlier with the splitting multiple wan interfaces, what I appreciate a lot I have another task. The machine is configured to go to the internet through the main wan-interface using IP -> Routes -> Rules rule with the option "lookup only in table" and IP -> Firewa...

Thanks for your reply

Anyway, if there are any solutions with some third-party soft could you please share any handy info about it?

Maybe Squid or PfSense are capable of this task?

Thank you

Hi, is it possible to have a proxy server, which could have multiple public connections from the different ISPs and also multiple local addresses to go through a certain public IP? For example, MikroTik has 3 ISP. Some of the devices in the local area network need to go to the world via web proxy us...

Hi, I know somewhere must be already existing thread about it, I even was googling about it and found in some of the threads about a possibility to use a USB hub with Mikrotik via USB ports to connect multiple USB devices, I'm sorry for creating a new one, but I only would like to ask who knows abou...

Hi, I need a script which could check all the time available LTE interfaces, find which corresponds to mac xx:xx:xx:xx:xx:xx and give this interface a certain name, and so on for all founded interfaces in LTE devices list, to give certain name to every LTE device depending on its unique mac address....

I found that in Interface -> LTE a device recognized by MikroTik as lte[number] and if I will change USB dongle to another modem modeL MikroTik will recognize it with the same name, after the modem is changed. Is there any way to bind LTE interface name so that MikroTik could remember the certain mo...

Well, it might work in this case with the interface as a gateway since LTE is not true ethernet. But you definitely need to specify the routing table on the "Advanced" tab of ping applet instead of the interface. Maybe you're right about LTE interface, I changed the gateway to IP and ping...

You'll need another routing-mark, next to existing pppoe-rt, and some mechanism to direct traffic to that routing table. • 1st ISP (pppoe-justlan) works as main WAN with no routing mark and any routing rules. • 2nd ISP (pppoe-rt) works as secondary WAN simultaneously with the first one. There's all...

I have two PPPoE's, one of each is primary without routing mark, the second one is secondary with routing mark pppoe-rt and has a rule in IP / Routes / Rules. Adding LTE with the static route and new route-mark as well as adding a rule in IP -> Routes -> Rules didn't help, LTE interface doesn't go t...

Hi, I have 3 active ISP channels. Two of it works fine simultaneously with independent PPPoE connections comes from ethernet for one standard .88 LAN. The problem with the 3rd ISP which comes from LTE USB dongle using Hi Link which means a basic network interface. It works only when the main PPPoE i...

Don't know what I did, but just removed all rules I created before for this task and added through the terminal, as you said and then added additional masquerade rule for this ip that I need and voila it did the trick, now it goes through 2nd pppoe automatically! You saved my time, thank you!

Hi, no luck with route rules you suggested with interface or src ip, traffic keeps going through pppoe1, I also tried mangle to make routing mark and use it in static route for pppoe2 with extra nat rule for pppoe2, it worked but while working through pppoe2 using mangle for src ip I don't understan...

port I need to assign internet for is separated from other ports' bridge, I could also use addresses' range if it works well

Hi, I have 2 isps pppoe connections and one lan 88.0 which by defaults goes to internet through pppoe 1 and just need only port5 to be able to go automatically through 2nd ppppoe instead pppoe1, what is the best way to do that? thx.

Any suggestions?

Thanks to all professionals who help here to many people with their occasions. I have a little problem such with access to my iTunes Home Media Library from iOS Apple Remote's App after I've installed MikroTik router. My iTunes Home Libraries are on two different Macs and the problem occurs when I'm...