Community discussions

Search found 32 matches

by Arco van Bezooijen
Thu Jul 20, 2006 4:09 pm
Forum: Wireless Networking
Topic: Wifi hotspot question, deleting users after expiration
Replies: 5
Views: 3092

anyway I can get this script ?
by Arco van Bezooijen
Fri Jul 07, 2006 5:55 pm
Forum: Scripting
Topic: deleting users after expiration
Replies: 1
Views: 1082

deleting users after expiration

Hi everyone, I already posted this in the wireless forum, but i think this is only possible using a script; I made a simple hotspot configuration using the wiki installation on page http://wiki.mikrotik.com/wiki/How_to_make_a_HotSpot_gateway I only have 1 type of user which expires at 1 day. I made ...
by Arco van Bezooijen
Wed Jul 05, 2006 12:21 pm
Forum: Wireless Networking
Topic: Wifi hotspot question, deleting users after expiration
Replies: 5
Views: 3092

Wifi hotspot question, deleting users after expiration

Hi everyone, I made a simple hotspot configuration using the wiki installation on page http://wiki.mikrotik.com/wiki/How_to_make_a_HotSpot_gateway I only have 1 type of user which expires at 1 day. I made several users (login codes) using: /ip hotspot user add name=94399701 limit-uptime=1d profile="...
by Arco van Bezooijen
Mon Jun 12, 2006 9:18 am
Forum: Wireless Networking
Topic: Need help, willing to pay (Queue+Firewall setup in 2.9.24)
Replies: 4
Views: 1037

Ok, here we go; We have several wireless ap-bridges (rb532’s with routeros 2.9.24) in our network. These bridge all have 1 ethernet port (ether1) and 1 WLAN card (wlan1) I need a configuration with: 1) The sum of all Downloads through the ap-bridge must be limited at 4000k 2) The sum of all Uploads ...
by Arco van Bezooijen
Fri Jun 09, 2006 9:49 pm
Forum: General
Topic: Need help, willing to pay (Queue+Firewall setup in 2.9.24)
Replies: 2
Views: 679

We have several wireless ap-bridges (rb532’s with routeros 2.9.24) in our network. These bridge all have 1 ethernet port (ether1) and 1 WLAN card (wlan1) I need a configuration with: 1) The sum of all Downloads through the ap-bridge must be limited at 4000k 2) The sum of all Uploads through the ap-b...
by Arco van Bezooijen
Fri Jun 09, 2006 5:32 pm
Forum: General
Topic: Need help, willing to pay (Queue+Firewall setup in 2.9.24)
Replies: 2
Views: 679

Need help, willing to pay (Queue+Firewall setup in 2.9.24)

Hi,

Who has a (wireless) network running and/or has enough knowledge of Queue and Firewall rules in Routeros 2.9.24 ?

I have a small list of what I want exactly which I can mail you.

Ofcourse I'm willing to pay for it.

Regards,
Arco
by Arco van Bezooijen
Fri Jun 09, 2006 5:31 pm
Forum: Wireless Networking
Topic: Need help, willing to pay (Queue+Firewall setup in 2.9.24)
Replies: 4
Views: 1037

Need help, willing to pay (Queue+Firewall setup in 2.9.24)

Hi,

Who has a (wireless) network running and/or has enough knowledge of Queue and Firewall rules in Routeros 2.9.24 ?

I have a small list of what I want exactly which I can mail you.

Ofcourse I'm willing to pay for it.

Regards,
Arco
by Arco van Bezooijen
Sat May 20, 2006 12:23 pm
Forum: Wireless Networking
Topic: rb532 bad blocks
Replies: 1
Views: 583

rb532 bad blocks

Hi,

After upgrading several rb532's in the field from 2.9.8 to 2.9.24 I see some bad blocks. Problem is you couldn't see the bad blocks in 2.9.8 in winbox so I didn't knew about it.

I worked with 2.9.8 with no strange problems on all boards.

Does anyone know if this is a big problem?
by Arco van Bezooijen
Fri May 05, 2006 11:55 pm
Forum: Wireless Networking
Topic: reading board/cpu temperature
Replies: 7
Views: 2169

ok, let's invite everyone...

maybe we should search for a component with 3 sensors. 1 for connecting to the cooling block of the cpu, 1 for the temperature in the box and 1 box the humidity.

hope some others should read this... and mikrotik..
by Arco van Bezooijen
Fri May 05, 2006 11:07 pm
Forum: Wireless Networking
Topic: reading board/cpu temperature
Replies: 7
Views: 2169

ok, bad luck. but...

if enough users overhere wants to implement this in winbox, why not choose 1 usb-sensor all, and then send 1 item to mikrotik and ask to implement this?

any one else interested? Let's make a list and then search for a nice product.
by Arco van Bezooijen
Fri May 05, 2006 10:49 pm
Forum: Wireless Networking
Topic: reading board/cpu temperature
Replies: 7
Views: 2169

reading board/cpu temperature

Hi, We made a mini-itx intel-based and passive cooled system. When you use routerboards you can read out the cpu/board temperature in winbox. Does anyone know if there is any possibility to read out the cpu temp with other hardware in winbox? Or is there some hardware usb- or serial sensor that I ca...
by Arco van Bezooijen
Tue Apr 25, 2006 10:56 pm
Forum: Wireless Networking
Topic: rb112 and throughput
Replies: 8
Views: 2018

I have not tested the rb112 yet, but did you try to test with 2 systems on both ends? Intel p4 like system -- rb112 -- rb112 -- Intel p4 like system The rb112 has less cpu power than the rb532 series. (175mhz instead of 333mhz), but I still think that the rb112 is more powerfull than a wrap board or...
by Arco van Bezooijen
Sat Apr 15, 2006 3:33 pm
Forum: Wireless Networking
Topic: CPE-Antenna alignment via customer / Application available?
Replies: 149
Views: 33177

hi cmit,

if you would be so kind to mail it to me too !

thanks in advance

arco
by Arco van Bezooijen
Tue Apr 04, 2006 8:45 pm
Forum: Wireless Networking
Topic: wireless integration problems, proxim/MT
Replies: 4
Views: 1128

I'm 100% sure MP11(a) uses the Wireless Outdoor Router Protocol (WORP). There is no way to mix this with MT.
by Arco van Bezooijen
Sun Nov 20, 2005 11:49 pm
Forum: Scripting
Topic: interface running check
Replies: 1
Views: 2080

interface running check

Hi, I have this script running on my rb200 boards scheduled every xx minutes to check if a wireless interface is running or not. I now use several rb532's boards, but I can't get it to work. I'm not a scriptkiddy myself, someone on this forum made one for me. Could someone please help me? :foreach i...
by Arco van Bezooijen
Tue Nov 15, 2005 9:17 pm
Forum: Wireless Networking
Topic: Inviting all Point Multipoint network owners!
Replies: 3
Views: 1383

Inviting all Point Multipoint network owners!

Hi There, I just want to invite all persons to share their experience in having a point multipoint network using the 5.xGHz band. I'm just curious, independent from what hardware you are using, if there are already are any successfull ISP's using Mikrotik software. Some questions I have at this poin...
by Arco van Bezooijen
Fri Sep 30, 2005 10:10 pm
Forum: Scripting
Topic: schedule/script doesn't work after reboot
Replies: 8
Views: 3390

schedule/script doesn't work after reboot

Hi there, I someone could help me out... I have a script running on all of my ap-bridges, that checks if the wireless interface is running every 5 minutes. Don't ask me why ;) sometimes a wifi interface stops running for a reason, and the only thing to do is disable and enable the interface to let i...
by Arco van Bezooijen
Sat May 28, 2005 3:35 pm
Forum: Scripting
Topic: help with script for dis-& enabling wifi interface
Replies: 2
Views: 1665

Hi Sten,

You were right. The interface is not disabled when the wifi-cell goes down.

I used your first Script, and it works great!

Thanks for the great help man.

Cheerz,

Arco
by Arco van Bezooijen
Thu May 26, 2005 11:08 pm
Forum: General
Topic: just 1 simple question; why does ntp only work with GMT ?
Replies: 2
Views: 682

just 1 simple question; why does ntp only work with GMT ?

And not GMT+2 or else.....

It's very annoying
by Arco van Bezooijen
Thu May 26, 2005 10:32 am
Forum: General
Topic: Upgrading the hardware, reinsllation require?
Replies: 5
Views: 1283

because of an hardware change (which i tested several times) I found out that I had to reconfigure / set the new interface on the following items: 1) If you bridge , include the new interface on the bridge. INTERFACES -> settings -> bridge 2) enable the ip settings on the new interface. IP -> ADDRES...
by Arco van Bezooijen
Tue May 24, 2005 10:55 pm
Forum: Scripting
Topic: help with script for dis-& enabling wifi interface
Replies: 2
Views: 1665

help with script for dis-& enabling wifi interface

Hi all, Could someone help me out with making a script that netwatches a wireless interface, and when the interface is disabled, some script FIRST disables the interface again, and then enables it again? The reason for this is that sometimes the wireless interface on my bridges disables itself for n...
by Arco van Bezooijen
Fri Apr 22, 2005 5:35 pm
Forum: General
Topic: Where have I gone wrong?!!
Replies: 3
Views: 774

I agree with fastrev. I suggest to use a couple of flatpanels or sector based antenna's for this. When you want the full 360 degrees, maybe you should consider using power dividers ( You'll loose some gain with that)

Mikrotik sells them:

https://www.mikrotik.com/antennas.php#linx8part2
by Arco van Bezooijen
Mon Apr 11, 2005 9:25 pm
Forum: General
Topic: Last-ip ?
Replies: 4
Views: 1225

mp3turbo; ?
by Arco van Bezooijen
Sat Apr 09, 2005 12:39 pm
Forum: General
Topic: queues and port priorities
Replies: 2
Views: 835

Just read this. If you take the time for it, it's not that difficult:

http://www.mikrotik.com/docs/ros/2.8/ho ... nt#12.2.14
by Arco van Bezooijen
Sat Apr 09, 2005 12:20 pm
Forum: General
Topic: Last-ip ?
Replies: 4
Views: 1225

Hi Randy, I have the same problem over here. Very strange. As I can see, I'm having this with one customer, but there are no real problems with the link (or duplicate ip addresses in my network). When you ping the customer in MT, last ip stays on the ip you have given the customer. I don't now for s...
by Arco van Bezooijen
Fri Mar 25, 2005 9:27 pm
Forum: General
Topic: last ip , last mac?
Replies: 3
Views: 2140

these are the mac addresses from the connected bridge, not the first mac address that is connected to the bridge interface.

last ip is also the ip of the first machine that is connected to the bridge; not the ip of the bridge.
by Arco van Bezooijen
Thu Mar 24, 2005 7:37 pm
Forum: General
Topic: last ip , last mac?
Replies: 3
Views: 2140

last ip , last mac?

in winbox, when you click on interfaces --> settings --> wireless tables and you choose a connection ,you can see the last ip (the ip what is used by the customer). is there also a way to see what mac-address this ip binded to?

maybe an option to include in next versions of winbox?
by Arco van Bezooijen
Sat Mar 19, 2005 2:00 pm
Forum: General
Topic: Radio disables itself sometime
Replies: 4
Views: 1163

Radio disables itself sometime

Does someone know what the reason could be if a radio disables itself? We use more than 8 AP-bridges with AR5212 & AR5213 cards, using version 2.8.24 or above. Sometimes the problem doens't come up for weeks, sometimes more then 1 time a day. When I click on disable and then click on enable (in winb...
by Arco van Bezooijen
Sat Mar 19, 2005 11:42 am
Forum: General
Topic: Wifi througput problem
Replies: 7
Views: 1733

secondly; EOIP consumes some bandwidth. Maybe that's the difference between those two measurements.
by Arco van Bezooijen
Sat Mar 19, 2005 11:40 am
Forum: General
Topic: Wifi througput problem
Replies: 7
Views: 1733

check if you are using the ip number of the wireless cel on the other side when you test, not the ip of the bridge or the ethernet-port.
by Arco van Bezooijen
Mon Mar 14, 2005 2:20 pm
Forum: General
Topic: Assigning CPE IP's with names instead of MAC addresses
Replies: 3
Views: 978

No,

I do not use any authentication.

I just want to give the pc/router name on the client side a unique number. This number has to be recognized by a dhcp server, giving the right ip-stack automaticaly.

Arco
by Arco van Bezooijen
Mon Mar 14, 2005 12:24 pm
Forum: General
Topic: Assigning CPE IP's with names instead of MAC addresses
Replies: 3
Views: 978

Assigning CPE IP's with names instead of MAC addresses

Hi There,

Does anyone know if there is a possibility in MT to assign ip numbers to a customer not by using the dhcp server in combination of his MAC-address, but just giving the customers pc or router a unique computername with corresponds with a central MT-server?

Thanks,

Arco