Community discussions

MUM Europe 2020

Search found 5 matches

by freddi
Fri Aug 30, 2019 3:07 pm
Forum: General
Topic: Traffic flow reported MAC addresses
Replies: 0
Views: 393

Traffic flow reported MAC addresses

Hello, I am using Traffic flow version 9 (or IPFIX). For this purpose I have installed a hEX RB750r3 configured as a bridge just before our internet gateway. This works well, except that the MAC addresses are set to the MAC addresses of the Mikrotik ports - not to the src and dst mac addresses as st...
by freddi
Wed Aug 07, 2019 9:13 pm
Forum: Beginner Basics
Topic: RB750GR3 as switch
Replies: 4
Views: 587

Re: RB750GR3 as switch

As a radioamateur would say: A short between the earphones... During the afternoon I tried all sorts of things. One of the points I noticed was that there was no response to ARP requests. So I ended up setting a static ARP entry on my PC. Did not work, and I finally upgraded the firmware. When I del...
by freddi
Wed Aug 07, 2019 7:48 pm
Forum: Beginner Basics
Topic: RB750GR3 as switch
Replies: 4
Views: 587

Re: RB750GR3 as switch

Hi, Thanks for replying. This is the (very simple) setup: (I've edited the first three quuads of the IP address) [admin@MikroTik] > /export hide-sensitive # jan/02/1970 02:41:56 by RouterOS 6.45.3 # software id = XTLQ-KZCF # # model = RB750Gr3 # serial number = 8AFF094D65BB /interface bridge add nam...
by freddi
Wed Aug 07, 2019 5:26 pm
Forum: Beginner Basics
Topic: RB750GR3 as switch
Replies: 4
Views: 587

RB750GR3 as switch

Hello, I'm trying to set up a RB750Gr3 as a 5-port smart switch with an IP address through which I can access the box. I've create a bridge and added all ports to it. Then added a static IP address to the bridge. With my computer on the same subnet it does not respond to pings. And with winbox I can...
by freddi
Sat Oct 27, 2018 1:39 pm
Forum: Beginner Basics
Topic: configuration question
Replies: 0
Views: 349

configuration question

Hello We have a network of bridged point-to-point links. I would like to add a user station in one of these links. Port 1 - connection to upstream ptp node (connects to internet gateway) port 2 - connection to downstream ptp node (other clients) port 3 - connection to client station. I would like th...