Community discussions

MikroTik App

Search found 19 matches

by idanmikos
Sun Mar 29, 2020 12:36 am
Forum: General
Topic: Winbox Quick Set strange Local network IP
Replies: 3
Views: 1301

Re: Winbox Quick Set strange Local network IP

Fact is that I didn't used Quick Set at all after configuring the router through IP-, Interfaces- and all other menus.
I have to mention that I have not used CLI, just winbox menus.
by idanmikos
Sat Mar 28, 2020 11:25 pm
Forum: General
Topic: Winbox Quick Set strange Local network IP
Replies: 3
Views: 1301

Winbox Quick Set strange Local network IP

Hi all, Newbie but willing to learn, configured a Hex3 as router with two WAN's, ISP1 and ISP2 on ethernet1 and 2 with failover. Here is is my config # mar/28/2020 22:43:00 by RouterOS 6.46.4 # software id = L5WD-NLXH # # model = RouterBOARD 750G r3 # serial number = 6Fxxxxxx1 /interface bridge add ...
by idanmikos
Sat Mar 14, 2020 2:28 am
Forum: General
Topic: DHCP server problem
Replies: 10
Views: 2944

Re: DHCP server problem

I had to pull out this Cap and make a hardware reset, since it wasn't showing up with its mac in winbox, no ssid broadcasting (like it should). It is very unlikely that someone would have been able to make a reset. All colleagues are nice and the device was fixed in a highly unaccesibile location. T...
by idanmikos
Wed Mar 11, 2020 6:12 pm
Forum: General
Topic: DHCP server problem
Replies: 10
Views: 2944

Re: DHCP server problem

Apparently there is a faulty CAP. Since I do not have direct access at this location I have just noticed (via winbox) that one of the CAP's has no IP in the lease list of RB2011. It may have lost its configuration due to ac-electric power failure. Starting a winbox via a local computer have shown th...
by idanmikos
Wed Mar 11, 2020 4:40 pm
Forum: General
Topic: DHCP server problem
Replies: 10
Views: 2944

Re: DHCP server problem

Thanks, Mkx.

I have changed authoritative to YES, as you suggested.

There is no other dhcp server on this network. We have just one router - the RB2011.
From where does this zombie 88 dhcp might come I have no idea.
Could it be something related to CAP's?
by idanmikos
Tue Mar 10, 2020 10:07 pm
Forum: General
Topic: DHCP server problem
Replies: 10
Views: 2944

Re: DHCP server problem

Thank you for your support, Anav. Here is my config. Hope it is fine... # mar/10/2020 21:49:25 by RouterOS 6.46.4 # software id = 1T8G-P35U # # model = 2011UiAS-2HnD # serial number = 63FA05E5DABF /caps-man channel add band=2ghz-g/n control-channel-width=20mhz name=channel2 add band=5ghz-n/ac contro...
by idanmikos
Tue Mar 10, 2020 8:56 pm
Forum: General
Topic: DHCP server problem
Replies: 10
Views: 2944

DHCP server problem

Hi all, I am using a RB2011 routerboard with dhcp server range configured as 192.168.1.10-192.168.1.254 I have attached here some winbox print screens that hope will help. Unfortunately some LAN clients (windows 10 desktops) acquire their IP from the old default range 192.168.88.10/254 It all starte...
by idanmikos
Wed Jan 08, 2020 12:34 am
Forum: RouterBOARD hardware
Topic: How Does the CRS328-24P-4S+RM Perform as a Router?
Replies: 8
Views: 3629

Re: How Does the CRS328-24P-4S+RM Perform as a Router?

My question was in fact if CRS125-24G-S-RM is ok to be used as a switch, or if some other alternatives are better, i.e. HP, Ubiquity?
by idanmikos
Sun Jan 05, 2020 4:15 pm
Forum: RouterBOARD hardware
Topic: How Does the CRS328-24P-4S+RM Perform as a Router?
Replies: 8
Views: 3629

Re: How Does the CRS328-24P-4S+RM Perform as a Router?

As a follow-up of what MR99 said about using the CRS as a router AND switch, please confirm that the best option is using the CRS125-24G-S-RM as a pure switch, after my old RB2011 router. Is it ok to also use some of the switching capabilities of RB 2011, by directly wiring some devices to the free ...
by idanmikos
Sat Dec 28, 2019 3:39 am
Forum: Wireless Networking
Topic: CAPsman with 2GHz and 5GHz networks [SOLVED]
Replies: 6
Views: 4631

Re: CAPsman with 2GHz and 5GHz networks [SOLVED]

Thank you Techlord!
Great tutorial.
I will follow your steps and come back if something will not work as supposed to.
by idanmikos
Wed Dec 25, 2019 8:12 pm
Forum: Wireless Networking
Topic: CAPsman with 2GHz and 5GHz networks [SOLVED]
Replies: 6
Views: 4631

Re: CAPsman with 2GHz and 5GHz networks [SOLVED]

Thank you for the answer!
But how to deal with two different SSID's in CAPs Configuration?
Define a new config? How?
Annotation 2019-12-25 200138.jpg
by idanmikos
Tue Dec 24, 2019 8:34 pm
Forum: Wireless Networking
Topic: CAPsman with 2GHz and 5GHz networks [SOLVED]
Replies: 6
Views: 4631

CAPsman with 2GHz and 5GHz networks [SOLVED]

Hi all, Newbie here, using RB2011UiAS-2HnD with two CAP ac AP's. I would like to let clients connect automatically to 2 or 5GHz networks but it looks like my 5GHz network does not have a name. Should I use the same SSID name as for 2 GHz network has, in my case `netis`? Or is it mandatory to use a d...
by idanmikos
Wed Oct 30, 2019 1:58 am
Forum: Beginner Basics
Topic: Using MikroTik hAP as simple switch plus wireless AP
Replies: 37
Views: 18875

Re: Using MikroTik hAP as simple switch plus wireless AP

If you start with some config already applied, it is bit more challenging because there will be a lot of setting which needs to be removed/changed. Given the config you posted I would suggest following: (keep in mind that I still assume you want to have switch+wifi. If your goal is different, let u...
by idanmikos
Thu Aug 08, 2019 4:29 pm
Forum: RouterBOARD hardware
Topic: Hardware compatible SFP
Replies: 0
Views: 1058

Hardware compatible SFP

Hi all, I have a RB2011 uias-2hnd and I would like to test/learn using its SFP port. Does this XSPF module do the job for short distances <100m: Modul SFP mini Gbic, Multi-Mode 10/100/1000, 1310nm http://www.mondoplast.ro/XSFP-MM--SFP-Multi-Mode-Gigabit-2km-Braun-Group-XSFP-MM1310-pg_ft-5869 At the ...
by idanmikos
Sat Apr 06, 2019 1:57 pm
Forum: Beginner Basics
Topic: How to go back to dynamic IP in DHCP server [SOLVED]
Replies: 11
Views: 2860

Re: How to go back to dynamic IP in DHCP server [SOLVED]

Thank you all for your support.
Have fun.

Dan
by idanmikos
Fri Apr 05, 2019 11:44 pm
Forum: Beginner Basics
Topic: How to go back to dynamic IP in DHCP server [SOLVED]
Replies: 11
Views: 2860

Re: How to go back to dynamic IP in DHCP server [SOLVED]

Thanks, Wise.

My question was more like academic, as you're right, no need for dynamic lease in normal environments.
Strange that the 'Make static' option does not have the 'Get back to dynamic' option too.

Have fun.
by idanmikos
Fri Apr 05, 2019 10:50 pm
Forum: Beginner Basics
Topic: How to go back to dynamic IP in DHCP server [SOLVED]
Replies: 11
Views: 2860

Re: How to go back to dynamic IP in DHCP server [SOLVED]

Thanks for the quick reply, Anav.
But what if once reconnected it will not lease a new IP to that device? Just maybe...
I would rather like to have a simple menu type choice - 'Make dynamic'.
by idanmikos
Fri Apr 05, 2019 10:33 pm
Forum: Beginner Basics
Topic: How to go back to dynamic IP in DHCP server [SOLVED]
Replies: 11
Views: 2860

How to go back to dynamic IP in DHCP server [SOLVED]

Hi all, Newbie here... using a hEx3 routerboard which works great in my office. Just figured out how to set a fixed IP for some devices in IP-DHCPserver, by right clicking on that devices entry and set 'Make static'. But how on earth can I go back to dynamically allocated IP in the same Winbox menu?...
by idanmikos
Thu Nov 01, 2018 3:48 pm
Forum: RouterBOARD hardware
Topic: NetInstall Instructions
Replies: 9
Views: 7387

Re: NetInstall Instructions

Thank you, David! Your step by step instructions worked perfectly for my new hAP mini. Have tried hours to make Netinstall working, but there wasn't any RB showing up. My fingers were painful for how many times (and minutes) I've been holding the reset button pressed. Thank you again!👍 Dan PS. For m...