Community discussions

MikroTik App

Search found 167 matches

by Jrslick22
Wed May 11, 2011 3:51 pm
Forum: General
Topic: Usermanager CoA not disconnecting users
Replies: 2
Views: 2719

Re: Usermanager CoA not disconnecting users

CoA is not currently supported
by Jrslick22
Wed May 11, 2011 10:44 am
Forum: The User Manager
Topic: How to make it so users CANT change passwords in UM
Replies: 4
Views: 1444

How to make it so users CANT change passwords in UM

Does anyone know how to make it so under the http://UM-router-ip/user users are not able to change there passwords?
I am using MT established pppoe sessions so if they change the password on the UM the MT client will not authenticate.

thanks
by Jrslick22
Wed May 11, 2011 8:23 am
Forum: The User Manager
Topic: User manager V5.2 Rate limit not working..
Replies: 2
Views: 1705

Re: User manager V5.2 Rate limit not working..

My 5.2 work fine. (well that part of it works fine).
by Jrslick22
Tue Sep 07, 2010 11:23 am
Forum: The User Manager
Topic: User Manager Problem When Using Multiple Interfaces
Replies: 2
Views: 1130

Re: User Manager Problem When Using Multiple Interfaces

Yes i have noticed this, i add both address for the router, the send and the return, it works but you will get multiple entries under the customers logging.
by Jrslick22
Mon Jun 14, 2010 4:18 am
Forum: General
Topic: mutiple lans behid mutiple pppoe-clients single WAN
Replies: 3
Views: 471

Re: mutiple lans behid mutiple pppoe-clients single WAN

pppoe 1,2,3 on port 5, dhcp server on port 2,3,4
by Jrslick22
Fri Jun 11, 2010 4:15 am
Forum: General
Topic: mutiple lans behid mutiple pppoe-clients single WAN
Replies: 3
Views: 471

mutiple lans behid mutiple pppoe-clients single WAN

i have an RB750 with a single wan port (ether5), i need to set this up so that three separate pppoe-clients can run with a separate dhcp server for ether 4-3 ether5-wan pppoe-client4-ether4-dhcp server network 4 pppoe-client3-ether3-dhcp server network 3 pppoe-client2-ether2-dhcp server network 2 no...
by Jrslick22
Wed Dec 16, 2009 10:39 pm
Forum: General
Topic: RouterBoard 1000 External Memory Card problem
Replies: 4
Views: 808

Re: RouterBoard 1000 External Memory Card problem

Check under system>store>disk

there should be a disk called CF1

cheers
by Jrslick22
Wed Dec 16, 2009 10:34 pm
Forum: General
Topic: Press 3 for tech support.......
Replies: 3
Views: 656

Press 3 for tech support.......

So after having a good laugh at the "NOT TO DO. Weird installations thread", I just had to start a tech support thread so we could list the best tech support calls we have had. These are our favorite so far: 1st place: I'm having problems with my wireless connection. Can you tell me what seems to be...
by Jrslick22
Thu Nov 19, 2009 8:55 am
Forum: RouterBOARD hardware
Topic: two pppoe-clents over a single wlan interface - possible? -
Replies: 4
Views: 1677

Re: two pppoe-clents over a single wlan interface - possible? -

You can run as many pppoe-clients as you want on one interfaces even without metarouters. Just make sure that you do proper policy routing: http://www.mikrotik.com/testdocs/ros/2.9/ip/route.php I have not been able to get more than one pppoe-client working at once. AP: AP-bridge running wds-mode=dy...
by Jrslick22
Thu Sep 17, 2009 3:58 am
Forum: Virtualization
Topic: meta router fault - pppoe-client
Replies: 0
Views: 1308

meta router fault - pppoe-client

So i have RB411AR: wlan1 assigned to bridge1 metarouter (mr1) with bridge1 pppoe-client assigned to bridge1 metarouter (mr1) with ether1 dhcp server on ether 1 wlan 1 with a pppoe client wlan 2 disabled This setup allows me to have two pppoe-clients running on wlan1, one for the main rb411 and one f...
by Jrslick22
Wed Aug 19, 2009 11:47 pm
Forum: The User Manager
Topic: v4.0rc4 where do users check there usage now? error
Replies: 12
Views: 3067

Re: v4.0rc4 where do users check there usage now? error

UM 4 has the option "Remove all" for logs. It can be used to delete all logs at the time. In version 3 if you deleted a log, a backup was created for it - so you could make an "undo" and restore that log. That means, the space was actually cleared only either after a reboot, or when undo history wa...
by Jrslick22
Wed Aug 19, 2009 5:50 am
Forum: The User Manager
Topic: RB 1000 ROS 4.2 beta Usermanager 2 Problem
Replies: 24
Views: 6139

Re: RB 1000 ROS 4.2 beta Usermanager 2 Problem

how are you backing this database up, i seem to have zero success with both /tool user-manager database backup as well as using the webgui maintenance save In console you can type /tool user manager database save name=mainsql.umb /tool user manager database save-logs name=logsql.umb Just tried a co...
by Jrslick22
Wed Aug 19, 2009 2:23 am
Forum: The User Manager
Topic: v4.0rc4 where do users check there usage now? error
Replies: 12
Views: 3067

Re: v4.0rc4 where do users check there usage now? error

Cool, the RB1000 was trying to boot from the CF card, removing it got it running again.

Yep im really glad the new UM database was on the flash card, did u catch my post on how i was having trouble backing RC4 up http://forum.mikrotik.com/viewtopic.php?f=10&t=31907

Awesome!
by Jrslick22
Wed Aug 19, 2009 2:06 am
Forum: The User Manager
Topic: v4.0rc4 where do users check there usage now? error
Replies: 12
Views: 3067

Re: v4.0rc4 where do users check there usage now? error

Ok well this is the thing, i was running 3.2X on a my rb1000 with my user manager DB on it, i have about 300 or so users, I have upgraded OS versions many times without a problem before but have been unable to back up the database due to the MT not having enough spare HD space (yes i have most of th...
by Jrslick22
Tue Aug 18, 2009 12:42 am
Forum: The User Manager
Topic: RB 1000 ROS 4.2 beta Usermanager 2 Problem
Replies: 24
Views: 6139

Re: RB 1000 ROS 4.2 beta Usermanager 2 Problem

YES, you must use CF Card! how are you backing this database up, i seem to have zero success with both /tool user-manager database backup as well as using the webgui maintenance save Sorry dude i dont mean to hijack your thread, just having a really hard time with this rc4 release and really need t...
by Jrslick22
Tue Aug 18, 2009 12:39 am
Forum: The User Manager
Topic: RB1000 & Usermanager
Replies: 14
Views: 7385

Re: RB1000 & Usermanager

by Jrslick22
Mon Aug 17, 2009 6:55 pm
Forum: The User Manager
Topic: RB 1000 ROS 4.2 beta Usermanager 2 Problem
Replies: 24
Views: 6139

Re: RB 1000 ROS 4.2 beta Usermanager 2 Problem

How in hells name are you able to fit 3000+ users on a RB1000?
Must be using the CF slot huh?
by Jrslick22
Mon Aug 17, 2009 6:48 pm
Forum: The User Manager
Topic: RB1000 & Usermanager
Replies: 14
Views: 7385

Re: RB1000 & Usermanager

does anyone know if under v4 we are able to store UM data on CF?

My RB1000 reports that user-manager is active on CF1, it seems this is not correct, can anyone confirm they are using the CF?

cheers
by Jrslick22
Mon Aug 17, 2009 6:44 pm
Forum: RouterBOARD hardware
Topic: two pppoe-clents over a single wlan interface - possible? -
Replies: 4
Views: 1677

Re: two pppoe-clents over a single wlan interface - possible? -

For anyone interested, this can be done using meta router, is a real nice way of using a CPE as a hotspot repeater while having the cutomer use pppoe and dhcp server
by Jrslick22
Mon Aug 17, 2009 5:49 pm
Forum: The User Manager
Topic: v4.0rc4 where do users check there usage now? error
Replies: 12
Views: 3067

Re: v4.0rc4 where do users check there usage now? error

i understand that it is still being tested, im just stating that this is not ready in the slightest for deployment. Alot of the other RC have been very good, this is not one of them. No offence intended MT rocks!
by Jrslick22
Mon Aug 17, 2009 2:32 pm
Forum: The User Manager
Topic: v4.0rc4 where do users check there usage now? error
Replies: 12
Views: 3067

Re: v4.0rc4 where do users check there usage now? error

Oh my goodness - donot install this usermanger if you can help it untill it is stable!
by Jrslick22
Mon Aug 17, 2009 12:57 pm
Forum: The User Manager
Topic: v4.0rc4 where do users check there usage now? error
Replies: 12
Views: 3067

Re: v4.0rc4 where do users check there usage now? error

It seems to sort of be working some of the time. geez this is buggy

thx
by Jrslick22
Mon Aug 17, 2009 11:46 am
Forum: The User Manager
Topic: v4.0rc4 where do users check there usage now? error
Replies: 12
Views: 3067

v4.0rc4 where do users check there usage now? error

My website is setup with a link to the usermanager so users can enter the usernames and passwords to check there usage, now that i have upgraded they get an invalid username and passord error. is there some trick with v4?

regards
by Jrslick22
Fri Aug 07, 2009 1:37 pm
Forum: RouterBOARD hardware
Topic: two pppoe-clents over a single wlan interface - possible? -
Replies: 4
Views: 1677

two pppoe-clents over a single wlan interface - possible? -

I have: RB500=r5h>pppoe-server+hotspot my normal config for customer is: rb411 customers pppoe: wlan1(station)>pppoe-client>masqurade>dhcp-server>ether1 I need to setup: RB11AR= wlan1(station)>pppoe-client1>masqurade>dhcp-server>ether1 {customers pppoe} wlan1(station)>pppoe-client2>bridge>wlan2(AP-b...
by Jrslick22
Tue Apr 28, 2009 8:01 am
Forum: Wireless Networking
Topic: Do you limit client distances from access point?
Replies: 16
Views: 2105

Re: Do you limit client distances from access point?

Thanks mate, helps alot.
by Jrslick22
Thu Apr 23, 2009 11:17 pm
Forum: Wireless Networking
Topic: Do you limit client distances from access point?
Replies: 16
Views: 2105

Re: Do you limit client distances from access point?

Sorry i was refering to the -120..-80
by Jrslick22
Wed Apr 22, 2009 1:36 am
Forum: Wireless Networking
Topic: Do you limit client distances from access point?
Replies: 16
Views: 2105

Re: Do you limit client distances from access point?

you can use the access list to make rules that limit signal strength. ie. users with signal below a certain threshold would not be allowed on your AP.
2009-03-25_1002.png
So this example will allow only clients with less than -80dbi to connect

Regards
by Jrslick22
Tue Apr 21, 2009 12:52 am
Forum: RouterBOARD hardware
Topic: So the Latvian Government has Collapsed
Replies: 2
Views: 705

So the Latvian Government has Collapsed

So the Latvian Government has Collapsed, how does this effect MT, were are the RB being made will production slow/cease?
by Jrslick22
Fri Apr 03, 2009 12:01 pm
Forum: Wireless Networking
Topic: Identifying the type of Radio being used in a MT?
Replies: 5
Views: 1042

Identifying the type of Radio being used in a MT?

Is there some way to identify the type of radio (r52,r52h,r5h,XR2,XR5 etc) using the MT so I don’t have to take the back of the unit and physically look and see?

thanks.
by Jrslick22
Wed Feb 18, 2009 12:07 am
Forum: The User Manager
Topic: RB1000 & Usermanager
Replies: 14
Views: 7385

Re: RB1000 & Usermanager

by chance does anyone now no how to clean the system disk as its still saying its got %0 free. I can see under store that there is a clean disk option for both the system and CF drives but im not game enough to find out what would happen if i clean the system drive (warning all data will be lost! cl...
by Jrslick22
Wed Feb 18, 2009 12:01 am
Forum: The User Manager
Topic: RB1000 & Usermanager
Replies: 14
Views: 7385

Re: RB1000 & Usermanager

OK for anyone following this thread. go into store and copy any active user-manager store, before saving change the disk to CF1 and tick activate. I had to do this a couple of times as the the logs were reporting a failed copy. this should at lease sort you out long enough for MT to improve this fea...
by Jrslick22
Tue Feb 17, 2009 11:20 pm
Forum: The User Manager
Topic: RB1000 & Usermanager
Replies: 14
Views: 7385

Re: RB1000 & Usermanager

I already have a CF card in there being used by the cache (not running at the moment) under /store/ i get both the web-proxy and the user-manager as being active this is causing an error when i try to set edit the disk to CF1

thanks.
by Jrslick22
Tue Feb 17, 2009 5:58 am
Forum: The User Manager
Topic: RB1000 & Usermanager
Replies: 14
Views: 7385

Re: RB1000 & Usermanager

Well many months after owning a RB1000 i am back to the same old problem, that is no free space! So i have a 61.4MB of total space with 0% free. I have deleted all logs and still no free space. Remove some of the packages - already done Upgrade the OS and use a CF card you say, no can do - you need ...
by Jrslick22
Mon Feb 16, 2009 11:09 pm
Forum: The User Manager
Topic: Disk Full
Replies: 3
Views: 1533

Re: Disk Full

Same problem here, did you find a fix, i have deleted 10 logs at a time (more than that seems to fail) untill i had enough space to turn logging off on all of my routers.

Any help from anyone else?

Cheers
by Jrslick22
Sun Sep 07, 2008 12:09 pm
Forum: RouterBOARD hardware
Topic: Routerboard RB1000 and RB604 announced
Replies: 26
Views: 7607

Re: Routerboard RB1000 and RB604 announced

Where has the web-proxy package gone for RB1000?

I did not see it in the "all packages" download for v3.13 even though its listed under "view content".

cheers
by Jrslick22
Mon Aug 25, 2008 7:03 am
Forum: The User Manager
Topic: RB1000 & Usermanager
Replies: 14
Views: 7385

Re: RB1000 & Usermanager

With only 64mb of flash and no ability to store userman on CF (comming soon im told) dont expect to store much of a user-manager database on this router without removing alot of your packages, logs and sessions.

just some free advice that has been expencive to learn.

cheers.
by Jrslick22
Mon Aug 25, 2008 6:59 am
Forum: RouterBOARD hardware
Topic: proxy cache store device
Replies: 9
Views: 2587

Re: proxy cache store device

Apacer 8gb high speed 300x is a no go in rb1000
Apacer 4gb 133 is good to go in a Rb600

can someone update wiki pls
by Jrslick22
Fri Aug 22, 2008 1:45 am
Forum: The User Manager
Topic: RB1000 & Usermanager
Replies: 14
Views: 7385

RB1000 & Usermanager

With only 64mb of flash and no ability to store userman on CF (comming soon im told) dont expect to store much of a user-manager database on this router.

just some free advice that has been expencive to learn.

cheers.
by Jrslick22
Sun Aug 03, 2008 3:57 am
Forum: The User Manager
Topic: moving usermanager from Rb532 to RB600, help, lots of help!
Replies: 8
Views: 2841

Re: moving usermanager from Rb532 to RB600, help, lots of help!

I have been told by MT that this feature is 3-4mths away.
by Jrslick22
Thu Jul 31, 2008 7:41 pm
Forum: The User Manager
Topic: moving usermanager from Rb532 to RB600, help, lots of help!
Replies: 8
Views: 2841

Re: moving usermanager from Rb532 to RB600, help, lots of help!

is there anyprogress on the cf option?
by Jrslick22
Sat May 24, 2008 8:17 am
Forum: The User Manager
Topic: moving usermanager from Rb532 to RB600, help, lots of help!
Replies: 8
Views: 2841

Re: moving usermanager from Rb532 to RB600, help, lots of help!

Just in case you thought this was solved....its not.

please help
by Jrslick22
Sat May 10, 2008 12:39 am
Forum: The User Manager
Topic: moving usermanager from Rb532 to RB600, help, lots of help!
Replies: 8
Views: 2841

Re: moving usermanager from Rb532 to RB600, help, lots of help!

This might seem like a dumb idea but can anyone from MT help me please.

How can i put the user manager data base on the CF card of a RB666 and with the CF card fail quickly due to high read writes?
by Jrslick22
Thu Apr 24, 2008 3:26 am
Forum: The User Manager
Topic: moving usermanager from Rb532 to RB600, help, lots of help!
Replies: 8
Views: 2841

Re: moving usermanager from Rb532 to RB600, help, lots of help!

I have a rb532 with user manager on it over the last few months it has begun to show signs of not being able to handle the traffic What 'signs' is it showing? I've just had a 532 stop responding with zero space left on the HDD. It had been running a hotspot on a public PC in a backpackers for about...
by Jrslick22
Sun Apr 20, 2008 3:33 am
Forum: The User Manager
Topic: moving usermanager from Rb532 to RB600, help, lots of help!
Replies: 8
Views: 2841

Re: moving usermanager from Rb532 to RB600, help, lots of help!

Can anyone help please, RB532 seems to be getting worse each day
by Jrslick22
Fri Apr 18, 2008 12:11 pm
Forum: The User Manager
Topic: moving usermanager from Rb532 to RB600, help, lots of help!
Replies: 8
Views: 2841

moving usermanager from Rb532 to RB600, help, lots of help!

I have a rb532 with user manager on it over the last few months it has begun to show signs of not being able to handle the traffic so I am (trying) moving the user manager to a RB600. When I log into the RB532 and attempt to save the database I get: Action timed out – try again, if error continues c...
by Jrslick22
Thu Apr 10, 2008 8:36 am
Forum: RouterBOARD hardware
Topic: RB133 Performance
Replies: 3
Views: 1335

Re: RB133 Performance

I only use 600's for my sites now, 3 radios ant enough from the 333, there cheap enough as well.
by Jrslick22
Tue Mar 04, 2008 3:26 am
Forum: General
Topic: Masquerading public IP's
Replies: 4
Views: 984

Re: Masquerading public IP's

Wonderful, thanks very much.
by Jrslick22
Mon Mar 03, 2008 9:29 pm
Forum: General
Topic: Masquerading public IP's
Replies: 4
Views: 984

Re: Masquerading public IP's

Anyone from MT? Please
by Jrslick22
Fri Feb 29, 2008 11:11 pm
Forum: General
Topic: Masquerading public IP's
Replies: 4
Views: 984

Re: Masquerading public IP's

anyone please
by Jrslick22
Thu Feb 28, 2008 10:09 pm
Forum: General
Topic: Masquerading public IP's
Replies: 4
Views: 984

Masquerading public IP's

I have a main router with a masquerade rule setup on it for all traffic out of my public Ethernet interface. this router(a) is connected to a second router(b) on a p2p link using RIP, the second router has the customer(c) on it (pppoe) with a public ip assigned to them. I want to setup a firewall ru...
by Jrslick22
Wed Feb 27, 2008 10:23 pm
Forum: Wireless Networking
Topic: Breaking 10-12Mbps on point to point links
Replies: 10
Views: 1829

Re: Breaking 10-12Mbps on point to point links

i have tested 411 too as wds bridges.At table with ROS 3.3 i`ve got stable 3 MB/s (24 mbps) with 5Ghz and around 5 Mb/s(40 bmps) one way with nstreme enabled.
Good numbers :D

But are they with TCP or UDP? Can you try with both directions?
yep real nice numbers
by Jrslick22
Tue Feb 26, 2008 7:18 am
Forum: Wireless Networking
Topic: Breaking 10-12Mbps on point to point links
Replies: 10
Views: 1829

Re: Breaking 10-12Mbps on point to point links

The default "5ghz" setting is 20mhz wide... "5ghz-turbo" is 40mhz wide.

Travis
In 5ghz i only have %ghz, 5ghz 10mhz, 5ghz 5mhz. its an R52h, would country code restrict this?

regards
by Jrslick22
Tue Feb 26, 2008 5:50 am
Forum: Wireless Networking
Topic: Breaking 10-12Mbps on point to point links
Replies: 10
Views: 1829

Re: Breaking 10-12Mbps on point to point links

Hi, How large of a channel are you using? 20mhz? 10mhz? A rough breakdown with your hardware: 10mhz channel is going to provide about 15Mbps maximum (one direction at a time) 20mhz channel is going to provide about 28Mbps maximum (one direction at a time) Also, are you using Nstreme? On point to po...
by Jrslick22
Tue Feb 26, 2008 1:40 am
Forum: Wireless Networking
Topic: Breaking 10-12Mbps on point to point links
Replies: 10
Views: 1829

Breaking 10-12Mbps on point to point links

I have a RB333 with a point to point link to a RB133c i get -65dbm signal, 38db Sig to noise, link reports 36/36Mbps. When i do a bandwidth test on this and any of my other p2p links i can never seem to get over about 10-12Mbps tcp. other links include RB533 to RB333, RB533 to RB533s Id love to get ...
by Jrslick22
Tue Feb 19, 2008 11:58 am
Forum: The User Manager
Topic: Can't Remove Userman Logs
Replies: 29
Views: 18875

Re: Can't Remove Userman Logs

What I ended up doing is to backup mikrotik, clear to factory settings and re-install all my settings. Then added a script which deletes logs. CLEAR USERMAN LOG SCRIPT: :local Flag :set Flag [/tool user-manager log find] :if ([:len $Flag] > 0) do={/tool user-manager log print append file log;/tool ...
by Jrslick22
Sun Feb 17, 2008 6:25 am
Forum: RouterBOARD hardware
Topic: Huawei usb 3g modems (used by vodafone)
Replies: 60
Views: 49728

Re: Huawei usb 3g modems (used by vodafone)

Skip that last comment i rebooted a couple of times and pugged and unplugged a couple more times and it has come up Although now the interface disconnects every 30 or so seconds and the logs say "could not acquire serial port" Ideas thanks Ok i have it all set up and running great, however if i reb...
by Jrslick22
Sun Feb 17, 2008 1:50 am
Forum: RouterBOARD hardware
Topic: Huawei usb 3g modems (used by vodafone)
Replies: 60
Views: 49728

Re: Huawei usb 3g modems (used by vodafone)

Im trying to work out what theses settings are for the E220 within New Zealand/Australia: We used: /interface ppp-client print 0 X name="ppp-out1" max-mtu=1500 max-mru=1500 port=usb1 user="" password="" profile=ppp-LMT phone="*99***1#" dial-command="ATDT" modem-init="AT+CGDCONT=1,"IP","internet.lmt....
by Jrslick22
Sat Feb 16, 2008 12:02 pm
Forum: RouterBOARD hardware
Topic: Huawei usb 3g modems (used by vodafone)
Replies: 60
Views: 49728

Re: Huawei usb 3g modems (used by vodafone)

Skip that last comment i rebooted a couple of times and pugged and unplugged a couple more times and it has come up

Although now the interface disconnects every 30 or so seconds and the logs say "could not acquire serial port"

Ideas

thanks
by Jrslick22
Sat Feb 16, 2008 11:49 am
Forum: RouterBOARD hardware
Topic: Huawei usb 3g modems (used by vodafone)
Replies: 60
Views: 49728

Re: Huawei usb 3g modems (used by vodafone)

I also have a Huawei E220 plugged into my RB230 running 3.3

Under resources i can see 1:2 Huawei Tech.., Huawei Mobile 12Mbps

Anyone know why when i try and set up the new ppp client i am unable to choose usb, the only option i have is serial0


cheers
by Jrslick22
Sat Feb 16, 2008 11:03 am
Forum: The User Manager
Topic: Can't Remove Userman Logs
Replies: 29
Views: 18875

Re: Can't Remove Userman Logs

Im at 198,000 this is starting to become a bit of a problem. anyone?
by Jrslick22
Thu Nov 15, 2007 9:19 pm
Forum: RouterBOARD hardware
Topic: level 3 licence where has PPPoe client gone! urgent
Replies: 6
Views: 1283

Re: level 3 licence where has PPPoe client gone! urgent

after about 5hrs if messing about i managed to get rc9 back on, my advice if your using 133c's dont put rc10 on em
by Jrslick22
Wed Nov 14, 2007 9:02 pm
Forum: RouterBOARD hardware
Topic: level 3 licence where has PPPoe client gone! urgent
Replies: 6
Views: 1283

Re: level 3 licence where has PPPoe client gone! urgent

only other clue is power on single chirp, after boot double chirp, 10 seconds later about 8 seconds of repeated chirping.

this must help, someone from MT pls
by Jrslick22
Wed Nov 14, 2007 8:57 pm
Forum: RouterBOARD hardware
Topic: level 3 licence where has PPPoe client gone! urgent
Replies: 6
Views: 1283

Re: level 3 licence where has PPPoe client gone! urgent

says its already installed.

its not as much of problem as i can even log into it now.
hyper terminal just says login but wont let me type or enter anything after everything seems to load ok.

got bigger problems than pppoe!
by Jrslick22
Wed Nov 14, 2007 9:36 am
Forum: RouterBOARD hardware
Topic: level 3 licence where has PPPoe client gone! urgent
Replies: 6
Views: 1283

level 3 licence where has PPPoe client gone! urgent

am setting up 6 RB133c for installing tomorrow have upgraded them all to v3rc10 cannot find pppoe client.

http://www.mikrotik.com/pricelist.php?sect=1

please help has it been moved by chance, can i downgrade to another version that supports PPPoe client

thanks
by Jrslick22
Fri Nov 02, 2007 10:32 pm
Forum: RouterBOARD hardware
Topic: Upgraded RB230 to 2.9.46 now no minipci card show
Replies: 1
Views: 1032

Upgraded RB230 to 2.9.46 now no minipci card show

Upgraded RB230 to 2.9.46 now no minipci card show, nether on the pci slot or the mini pci slot, any ideas?

logging doesnt show any errors

cheers
by Jrslick22
Tue Oct 30, 2007 4:32 am
Forum: Wireless Networking
Topic: 5.4GHz superchannel license needed?
Replies: 30
Views: 13929

Re: 5.4GHz superchannel license needed?

three choices: 1. find the official Brazilian (or "insert country here") documents and forward to mikrotik, so we can update our lists in the next versions 2. get a custom frequency license to override the limitations and use whatever you want 3. use a country setting with the right freqs :) Which ...
by Jrslick22
Sat Oct 27, 2007 12:19 am
Forum: Wireless Networking
Topic: 5.4GHz superchannel license needed?
Replies: 30
Views: 13929

Re: 5.4GHz superchannel license needed?

it seems the 5.4ghz channels are not avalible for Brazil in 3.0

Does any one know the contry to select to make the 5.4ghz channels avalible under 3.0?

It sure would be nice to be able to use the legal channels in our contries without this dicking around.
by Jrslick22
Tue Oct 23, 2007 12:20 am
Forum: RouterBOARD hardware
Topic: Hard reset RB230
Replies: 1
Views: 1397

Hard reset RB230

Does anyone remember how to Hard Reset the RB230 someone disabled all the lan interfaces and the win box loader is not picking it up on the mac side.

Cheers
by Jrslick22
Fri Sep 28, 2007 11:43 pm
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16544

Re: Monitoring of battery voltage via winbox

Sounds great, web site?
by Jrslick22
Fri Sep 28, 2007 6:46 am
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16544

Re: Monitoring of battery voltage via winbox

I have a second 333 coming out of a site soon so ill be able to test them side by side.

Honestly it wouldnt even boot with no cards in it on 12v, 18v no provlem and yes i have used diffrent bower pac's cables and a combination of pppoe and DC jack
by Jrslick22
Thu Sep 27, 2007 11:00 am
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16544

Re: Monitoring of battery voltage via winbox

I disagree.

It worked the same on the bench top with no other MT plugged in.
It is working fine now that it is on an 18v inverter.

besides most electricians are dumb arses anyway.
by Jrslick22
Wed Sep 26, 2007 11:17 am
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16544

Re: Monitoring of battery voltage via winbox

it is a 13.4v 1200Ah battery bank powering 6 other 532 MT's

...and before it is suggested that is about 2.5amps worth of MT's, 80amp - 2.5amps = 77.5 i don't think its a batterys cant provide enough power issue, i may have just got the one out of every 1000 with the doggy power regulator.
by Jrslick22
Tue Sep 25, 2007 10:34 pm
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16544

Re: Monitoring of battery voltage via winbox

cable length 5 meters
radios xr2, xr5, r52h

even with no radios in it is would not boot reliably on less than 18v.

Ive put a 5 amp lamp on the end of the power cable, it ran fine drawing all 5 amps according to the meters

as far as i can tell the MT only draws around 300-400ma
by Jrslick22
Tue Sep 25, 2007 11:24 am
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16544

Re: Monitoring of battery voltage via winbox

well buggar me, how many amps is it drawing?
by Jrslick22
Mon Sep 24, 2007 11:13 pm
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16544

Re: Monitoring of battery voltage via winbox

We have tested it here and it does work. You probably have a voltage drop on the cable or from your battery supply. Please use a multimeter to measure the input voltage on the board. you have it running on 12v do you? how many radio's what kind, i couldnt get it to boot reliably on a bench top even...
by Jrslick22
Mon Sep 24, 2007 12:06 pm
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16544

Re: Monitoring of battery voltage via winbox

I know what it should do the point is it don't. i have a 12 solar site that provides up to 80 amps @ 12v to our inverter but will it run a RB333? NO. has all sorts of problems, brought a 18v inverter no problem since. Write this down if you plan on running one on 12 or less, it wont work! Sorry to b...
by Jrslick22
Mon Sep 24, 2007 6:51 am
Forum: Wireless Networking
Topic: RB333, RC4 - no ssl sites
Replies: 10
Views: 1544

Re: RB333, RC4 - no ssl sites

I cant be the only person who's using a rb333 as there gateway running RIP, can i?

can anyone help
by Jrslick22
Sun Sep 23, 2007 9:03 am
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16544

Re: Monitoring of battery voltage via winbox

yes your right thats what the manual says, buy one and try it and you'll see what i mean.

It will only boot off 12v if it has no radios in it.
by Jrslick22
Sun Sep 23, 2007 12:57 am
Forum: Wireless Networking
Topic: Sectored Antani's on a tower
Replies: 54
Views: 5942

Re: Sectored Antani's on a tower

3 sectors, 3 radios, 2 RBs,
by Jrslick22
Sat Sep 22, 2007 3:09 pm
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16544

Re: Monitoring of battery voltage via winbox

the newer RB333 supports voltage monitoring, but it wont run off anything less than 18v so thats probably not going to help anyway, cool aye.
by Jrslick22
Sat Sep 22, 2007 3:06 pm
Forum: Wireless Networking
Topic: RB333, RC4 - no ssl sites
Replies: 10
Views: 1544

Re: RB333, RC4 - no ssl sites

Seems as though the RIP issue mentioned has not been sorted in RC5 ether
by Jrslick22
Thu Sep 13, 2007 2:58 pm
Forum: Wireless Networking
Topic: RB333, RC4 - no ssl sites
Replies: 10
Views: 1544

Re: RB333, RC4 - no ssl sites

right i get it, so your essentially telling router 1 how to find the other side of router 2. i assume if i have mor than one interface on router 2 i will need to add a second route to router 1 telling it how to find this subnet also. not sure how to test it, has not appeared to have made any differe...
by Jrslick22
Thu Sep 13, 2007 1:51 pm
Forum: Wireless Networking
Topic: RB333, RC4 - no ssl sites
Replies: 10
Views: 1544

Re: RB333, RC4 - no ssl sites

ok doesnt seem very difficult router1 (gateway rb333) wan IP x.x.x.x--wlan IP 10.10.120.1/30 AS 0.0.0.0/0 GW x.x.x.n where x.x.x.x is my public address and x.x.x.n is the upstream gateway router2 (2.9.46 running RIP) wlan IP 10.10.120.2/30 ip route add gateway=x.x.x.n dst-address=10.10.120.1/30 is t...
by Jrslick22
Thu Sep 13, 2007 1:17 pm
Forum: Wireless Networking
Topic: RB333, RC4 - no ssl sites
Replies: 10
Views: 1544

Re: RB333, RC4 - no ssl sites

oh i understand, yes you are right 2.9.46 on the old.

Im not that up on adding the static routing to overcome this, where would i begin?
by Jrslick22
Thu Sep 13, 2007 1:03 pm
Forum: Wireless Networking
Topic: RB333, RC4 - no ssl sites
Replies: 10
Views: 1544

Re: RB333, RC4 - no ssl sites

it is not the internet connection because when i switch back to the old router it works fine.

where would one download rc5?

thanks
by Jrslick22
Thu Sep 13, 2007 12:19 am
Forum: Wireless Networking
Topic: RB333, RC4 - no ssl sites
Replies: 10
Views: 1544

RB333, RC4 - no ssl sites

Just replaced my gateway MT with a rb333, set it up with a public IP on eth 1 and a r52 in a point to point link into our network, running RIP routing, defult route out, masquerade, firewall port 22, 23, 80 on the wan side, honestly nothing special or unique. have compared it with the old unit (2.9....
by Jrslick22
Sat Sep 01, 2007 10:14 am
Forum: RouterBOARD hardware
Topic: WARNING for Solar sites - RB333
Replies: 0
Views: 1006

WARNING for Solar sites - RB333

Ive just come back from a day at one of our solar and wind power sites, I tried for several hours to get the RB333 working reliably and could only do so when I installed my notebook car adapter which inverted the 13.8-14.4v power up to 20v even with only one R52 installed it just would not boot reli...
by Jrslick22
Thu Aug 30, 2007 3:38 am
Forum: Wireless Networking
Topic: Poor performance from R52h
Replies: 1
Views: 630

Poor performance from R52h

I replaced a EMP-8602 with an R52h, now my client that was getting 86db is getting 95db, no other change was made, output power is set to default on both, MT is running 2.9.44

ideas?
by Jrslick22
Wed Aug 29, 2007 10:46 pm
Forum: Wireless Networking
Topic: help with country code for 2.8
Replies: 1
Views: 494

help with country code for 2.8

Where is the country select for 2.8.x i have an old RB230 that is not set up correctly so i am unable to access some of the channels for my country?
by Jrslick22
Wed Aug 22, 2007 12:49 am
Forum: The User Manager
Topic: How do I reset users?
Replies: 20
Views: 8923

Re:

Hi all, the latest release of the Usermanager 2.9.29 has the function in the administrative web console to reset selected users counters. Top marks Uldis/Mikrotik team thanks for listening to our requests. Geoff I cant seem to find the reset counters button within the console, i see the select all ...
by Jrslick22
Fri Aug 10, 2007 11:53 am
Forum: Wireless Networking
Topic: 5.4GHz superchannel license needed?
Replies: 30
Views: 13929

Re: 5.4GHz superchannel license needed?

same thing here, Gov has just made 5.4 usable spectrum, what do we have to do to utilize this band?
by Jrslick22
Mon Aug 06, 2007 1:19 pm
Forum: Scripting
Topic: Backup schedule
Replies: 35
Views: 6478

Re: Backup schedule

found it.


thanks anyway, great script.
by Jrslick22
Mon Aug 06, 2007 1:07 pm
Forum: Scripting
Topic: Backup schedule
Replies: 35
Views: 6478

Re:

This is an update of my original post here. I have not had time to update my backup scripts since way back when I asked MT to add a find command to the system history command. Well, in 2.9.29, they added it for me, so now my backup script is able to determine whether the "admin" user has logged in ...
by Jrslick22
Fri Jul 27, 2007 12:34 am
Forum: General
Topic: How to: Public IP's on wireless clients
Replies: 2
Views: 675

Re: How to: Public IP's on wireless clients

Please anyone?

To overcome the problem in the sort term I have assigned the public address to the gateway MT and then dst-nat all the traffic to the private address
by Jrslick22
Thu Jul 26, 2007 9:02 am
Forum: The User Manager
Topic: Decreasing bandwidth afre an specific traffic ammount
Replies: 5
Views: 1720

Re: Decreasing bandwidth afre an specific traffic ammount

but it is possible with some script help.
Anyone? please?
by Jrslick22
Thu Jul 26, 2007 12:25 am
Forum: General
Topic: How to: Public IP's on wireless clients
Replies: 2
Views: 675

How to: Public IP's on wireless clients

I have a MT with my public ip on eth1, I have another MT connected to the first with a wireless link, this second MT has all my wireless pppoe clients on it using private ip addresses. One of my clients on this MT would like a public IP, I know how to assign him the address but I’m not sure how to m...
by Jrslick22
Thu Jun 07, 2007 2:43 pm
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16544

Re:

By the way, aside from power voltage monitoring, it would be very nice if the RouterBOARDs can shut down if the power supply is under some voltage. I have seen lots of cases, where wireless modules lose their config, or sometimes (happens a lot with CM9) have their configuration eeprom destroyed. i...
by Jrslick22
Sat Mar 31, 2007 2:53 pm
Forum: RouterBOARD hardware
Topic: Error: Missing RouterOS winbox plugins
Replies: 2
Views: 2789

More info:

Ive cleared the winbox cache already

I can winbox to all my other MT but this one.
I pass through this MT to get to my others.

cheers
by Jrslick22
Sat Mar 31, 2007 2:34 pm
Forum: RouterBOARD hardware
Topic: Error: Missing RouterOS winbox plugins
Replies: 2
Views: 2789

Error: Missing RouterOS winbox plugins

when i try to winbox to a remote router i get:

Missing RouterOS winbox plugins

Ideas?
by Jrslick22
Tue Mar 20, 2007 9:27 pm
Forum: Wireless Networking
Topic: Vote for new RouterOS features!
Replies: 10
Views: 2360

Feature request

I vote for course threading on the riser screws instead of fine RB502
by Jrslick22
Sun Mar 11, 2007 11:38 pm
Forum: The Dude
Topic: 2003 Server SP1
Replies: 3
Views: 2285

Im also running (trying) the dude on 2003 server and am getting no snmp information.

diffrance is i have no snmp service to open? does it have to be installed or what?

im looking under -management-services&apps-services

no snmp at all.

cheers
by Jrslick22
Sat Feb 24, 2007 8:37 am
Forum: General
Topic: Routing two networks to two gateways one mikrotik
Replies: 4
Views: 1202

Mangle the traffic from your 192.168.250.X network and mark packet. Then once you do that setup a route based on that marked packet.
This is what im looking for, thanks for the help.

I am not looking to load balance.

Thanks
by Jrslick22
Fri Feb 23, 2007 2:14 am
Forum: General
Topic: Routing two networks to two gateways one mikrotik
Replies: 4
Views: 1202

Routing two networks to two gateways one mikrotik

I have a mikrotik with two gateways 1. 10.10.100.55 2. 10.1.1.1 I currently have two static routes 0.0.0.0/0 GW 10.10.100.55 0.0.0.0/0 GW 10.1.1.1 By disabling one or the other I am obviously sending my traffic out ether gateway I also have two networks 192.168.250.X 192.168.251.X I want to send all...
by Jrslick22
Thu Dec 28, 2006 3:02 am
Forum: Wireless Networking
Topic: F$*@ing Spam
Replies: 2
Views: 869

Cheers Tom
by Jrslick22
Thu Dec 28, 2006 12:00 am
Forum: Wireless Networking
Topic: F$*@ing Spam
Replies: 2
Views: 869

F$*@ing Spam

Im not that good at firewalling with the MT yet, will this rule stop all outgoing port 25 traffic that does not come from my mail server(192.168.238.253)? chain=output src-address=!192.168.238.253 protocol=tcp dst-port=25 action=drop I was told to block all outgoing mail not comming from my mailer b...
by Jrslick22
Fri Dec 22, 2006 11:08 pm
Forum: The Dude
Topic: Dude Locked Out
Replies: 2
Views: 1786

Ive lost my password also, although im sure its the right one, is there a work around?

PM me to please
by Jrslick22
Tue Dec 12, 2006 6:38 am
Forum: General
Topic: BETA Testing and Feature Suggestions for next routeros
Replies: 329
Views: 80241

How about sorting out the RF leakage (88mhz), that be a real good idea.
by Jrslick22
Sat Dec 02, 2006 11:33 pm
Forum: General
Topic: Firewall rule
Replies: 13
Views: 4873

you would drop all p2p
by Jrslick22
Mon Nov 20, 2006 12:58 pm
Forum: General
Topic: Firewall rule
Replies: 13
Views: 4873

Thanks for the help guys. Mac's part works like a trick, i can see the counters for both packet and connection mark working and counting together. cheers Skillful, the rule does not seem to stop the 10.10.54.0 subnet? does the rules have to be on the wireless MT? i have one as my gateway, the other ...
by Jrslick22
Wed Nov 15, 2006 7:11 am
Forum: General
Topic: Firewall rule
Replies: 13
Views: 4873

ah dope

ok ive set up the connection mark: chain=forward p2p=all-p2p action=mark-connection new-connection-mark=p2p-conn-drop passthrough=yes and then the firewall rule: ;;; p-2-p Control chain=forward src-address=10.10.54.0/24 dst-address=10.10.54.0/24 connection-mark=p2p-conn-drop p2p=all-p2p action=drop ...
by Jrslick22
Wed Sep 06, 2006 4:03 am
Forum: General
Topic: Firewall rule
Replies: 13
Views: 4873

Anyone? MT please?
by Jrslick22
Wed Sep 06, 2006 3:59 am
Forum: Wireless Networking
Topic: mppe 40 stateless connections
Replies: 1
Views: 1060

Anyone? MT please?
by Jrslick22
Wed Sep 06, 2006 3:56 am
Forum: Wireless Networking
Topic: Power output for Senao NMP-8602
Replies: 39
Views: 13779

what a fitting end for a mac
by Jrslick22
Tue Sep 05, 2006 11:36 am
Forum: Wireless Networking
Topic: mppe 40 stateless connections
Replies: 1
Views: 1060

mppe 40 stateless connections

I got clients connecting via pppoe using mppe 128 statefull encryption via the use encryption option under the pppoe profile. when clients use SMC pppoe routers a mppe 40 stateless connection is established which does not work. If I turn off the use encryption option it works fine.

any ideas? thanks.
by Jrslick22
Wed Aug 02, 2006 10:54 pm
Forum: General
Topic: Firewall rule
Replies: 13
Views: 4873

ok ive updated the rule but p2p still gets through. With the src and dst addresses removed the rule works fine.

chain=forward src-address=10.10.54.0/24 dst-address=10.10.54.0/24
p2p=all-p2p time=7h30m-22h,sat,fri,thu,wed,tue,mon,sun action=drop
by Jrslick22
Wed Aug 02, 2006 2:05 pm
Forum: Wireless Networking
Topic: if i change AP, but mantein SSID name... clients connect?
Replies: 15
Views: 2680

Question1 probably won't work.

I learned it hard way. Problem is that most of the standalone devices, when you attach them using survey option, does not lock just to SSID but to MAC of the AP too. If you change AP device and use the same SSID, MAC is different and clients do nto connect.
I agree
by Jrslick22
Wed Aug 02, 2006 2:02 pm
Forum: General
Topic: Firewall rule
Replies: 13
Views: 4873

Firewall rule

i have a p2p firewall rule set up like this add chain=forward p2p=all-p2p time=7h30m-22h00m,sat,fri,thu,wed,tue,mon,sun \ action=drop comment="" disabled=no it works fine. I want to make it so that the rule only applys to certin ip ranges, so i added this: add chain=forward src-address=10.10.54.0/24...
by Jrslick22
Wed Jul 19, 2006 12:11 am
Forum: Wireless Networking
Topic: How secure is PPPoe?
Replies: 4
Views: 3897

Chap is encrypted so sniffing user names and passwords I was told would still be tough. Under the pppoe profile I also have use encryption on, don’t really no what it does though?
by Jrslick22
Tue Jul 18, 2006 2:05 pm
Forum: Wireless Networking
Topic: How secure is PPPoe?
Replies: 4
Views: 3897

How secure is PPPoe?

I have been happily running pppoe authentication across my 2.4ghz wireless network for about a year now without any problems and wanted to know how secure it actually is? I am using mschap1 and 2 and have a free radius server running as an access concentrator. I do not use mac tables as users enjoy ...
by Jrslick22
Wed May 17, 2006 10:20 am
Forum: Wireless Networking
Topic: Mikrotik wireless facts "problems" <-- sorry
Replies: 28
Views: 4874

I have MT running over 60+ Km and get 3-5ms pings, i also have 50 clients hanging off 1 200mw card without any probs, MT's Rock
by Jrslick22
Sun Apr 30, 2006 9:32 am
Forum: RouterBOARD hardware
Topic: Proxy ... where is web proxy
Replies: 9
Views: 3101

Ive got a 400MB microdrive in my MT 500, still cant get it to work
by Jrslick22
Sat Apr 29, 2006 12:10 pm
Forum: General
Topic: PPPoe encryption / compression
Replies: 2
Views: 2699

thank for taking the time
by Jrslick22
Sat Apr 29, 2006 6:08 am
Forum: General
Topic: OSPF in 2.9.22 multipath/failover
Replies: 6
Views: 1532

Would it be ok if i email you instead as i prefer for the network map no to be posted on a public forum?
by Jrslick22
Sat Apr 29, 2006 5:09 am
Forum: General
Topic: OSPF in 2.9.22 multipath/failover
Replies: 6
Views: 1532

can i try it on just afew of my router or do you have to use it on all of em?

ill put every thing together and post it on a web site for you.
by Jrslick22
Sat Apr 29, 2006 2:11 am
Forum: General
Topic: Switching to OSPF
Replies: 2
Views: 1142

I’m running RIP with static routes pointing to the next MT up the line, id like to implement OSPF for multipath but am scared it will mess everything up in the process, can it be setup to run in parallel with RIP before RIP is removed?
by Jrslick22
Sat Apr 29, 2006 1:58 am
Forum: General
Topic: OSPF in 2.9.22 multipath/failover
Replies: 6
Views: 1532

im using RIP, but would like to run OSPF, any chance of some help setting it up?

Thanks
by Jrslick22
Sat Apr 29, 2006 1:56 am
Forum: General
Topic: A bunch of questions for my wisp operation
Replies: 19
Views: 3418

I changed over to PPPoe about 2 year ago and sure am glad that I did, with no IP address assigned to the wireless interface its a lot more complex than spoofing a mac address and putting in the right IP, also the less the customer has to set up the better ie IP addresses etc, once they have followed...
by Jrslick22
Sat Apr 29, 2006 1:46 am
Forum: General
Topic: PPPoe encryption / compression
Replies: 2
Views: 2699

PPPoe encryption / compression

I’m running a MT with a bunch of wireless clients connecting via PPPoe, I am wondering if under the pppoe profile I should turn on compression and encryption/require encryption? Would it slow down the connections due to the encryption element? Would this form of encryption even work or is it another...
by Jrslick22
Fri Apr 28, 2006 10:34 am
Forum: The Dude
Topic: Links between devices
Replies: 3
Views: 1888

Click add (+ sign) then go down to link, then click on your device and drag the line to the other device
by Jrslick22
Thu Mar 02, 2006 3:45 am
Forum: Wireless Networking
Topic: Is any one running 2x SR5's and 2x CM9s in an RB500?
Replies: 4
Views: 1204

Is any one running 2x SR5's and 2x CM9s in an RB500?

Is any one running 2x SR5's and 2x CM9s in an RB500?
im told it wont work as the SRs draw to much power?
by Jrslick22
Sun Feb 12, 2006 11:01 am
Forum: Wireless Networking
Topic: MT 2.8.28, hotspot and 2 Senao pcmcia cards
Replies: 5
Views: 1638

I have had a simalar problem, that was due to radio problems not drivers or MT. antennas were to close togther and the channels were overlaping
by Jrslick22
Sun Feb 12, 2006 3:16 am
Forum: Wireless Networking
Topic: 5.8 links falling over - no beacons ?
Replies: 18
Views: 3975

sure are
Where? im in Hamilton
by Jrslick22
Sun Feb 12, 2006 3:16 am
Forum: Wireless Networking
Topic: MT 2.8.28, hotspot and 2 Senao pcmcia cards
Replies: 5
Views: 1638

Have you been able to get one card working right as an AP? (the other card not in the RB)
by Jrslick22
Sun Feb 12, 2006 3:11 am
Forum: Wireless Networking
Topic: Web Proxy
Replies: 14
Views: 3785

Re: ???

web-proxy is an additional package which when installed.....still doesn’t work?? well i cant find any other traces of web-poxy apart from listing installed packages, any ideas?? web-proxy package is only avaible on x86 instalations of MT, for the RB532 there is web-proxy-test package and you will f...
by Jrslick22
Sun Feb 12, 2006 3:07 am
Forum: Wireless Networking
Topic: 11 channel to 14 channel
Replies: 2
Views: 4472

is it a PCMCIA card? you'll need to flash the firmware to work with 14 chan
by Jrslick22
Sun Feb 12, 2006 1:53 am
Forum: Wireless Networking
Topic: Gamers are complaining
Replies: 24
Views: 5998

How close are the sectors physically located to each other? do you have channel separation?
by Jrslick22
Sun Feb 12, 2006 1:48 am
Forum: Wireless Networking
Topic: MT 2.8.28, hotspot and 2 Senao pcmcia cards
Replies: 5
Views: 1638

how about

How do they run when they are not bridged?
by Jrslick22
Sun Feb 12, 2006 1:47 am
Forum: Wireless Networking
Topic: 5.8 links falling over - no beacons ?
Replies: 18
Views: 3975

??

Are you in NZ Chris?
by Jrslick22
Thu Feb 02, 2006 11:51 pm
Forum: Wireless Networking
Topic: Web Proxy
Replies: 14
Views: 3785

Still nothing

Nope not there, assuming its still found under ip>web-proxy
by Jrslick22
Thu Feb 02, 2006 11:27 pm
Forum: Wireless Networking
Topic: Web Proxy
Replies: 14
Views: 3785

???

web-proxy is an additional package which when installed.....still doesn’t work?? well i cant find any other traces of web-poxy apart from listing installed packages, any ideas??
by Jrslick22
Thu Feb 02, 2006 11:13 pm
Forum: RouterBOARD hardware
Topic: Other uses for routerboard??
Replies: 4
Views: 1952

Use a Thin client

I have installed MS2000, XP & XP Media successfully on a $100 thin client.

you get all the USB VGA ports to which is nice.
by Jrslick22
Thu Feb 02, 2006 11:03 pm
Forum: RouterBOARD hardware
Topic: Proxy ... where is web proxy
Replies: 9
Views: 3101

Not me

I have installed the web-proxy package (confirmed in installed packages) and cannot seem to find ip>web-proxy anyware
by Jrslick22
Thu Feb 02, 2006 10:56 pm
Forum: RouterBOARD hardware
Topic: Webproxy- test package on rb532 - Problem ?
Replies: 2
Views: 1282

Me too

I have also installed this package (confirmed in installed packages) and cannot seem to find ip>web-proxy
by Jrslick22
Tue Jan 31, 2006 12:11 am
Forum: Wireless Networking
Topic: Maximum users on the AP
Replies: 12
Views: 10567

good question

1 run 50 512 users of a single b sector fine
by Jrslick22
Sat Dec 03, 2005 12:48 am
Forum: Wireless Networking
Topic: The best security for wireless users is?
Replies: 5
Views: 1611

Chap or MSchap1&2

Could I easily implement ether Chap or MSchap1&2 and still have my XP or Raspppoe users authenticate? Which would be the most recommended protocol to use? How would it be done on the clent side?

Thanks
by Jrslick22
Sat Dec 03, 2005 12:36 am
Forum: Wireless Networking
Topic: The best security for wireless users is?
Replies: 5
Views: 1611

Same here

I figured this was the case but know not where to go to find the help to fix it. I would prefer to broadcast the SSID as it does a lot of free advertising for us, sounds like I need to hide it though. Most of my clients connect to our network via a cheapo bridge like the Dlink 900ap+ or the 810+ or ...
by Jrslick22
Thu Dec 01, 2005 12:56 am
Forum: Wireless Networking
Topic: The best security for wireless users is?
Replies: 5
Views: 1611

The best security for wireless users is?

I currently have a bunch of users hanging off a MT with a couple of prisms in it, (default authenticate) and then we use PPPoe for authentication (pap+FreeRadius). Apart from the authentication I don’t use any other security. There is also a CM9 which connects to the backbone providing access to the...
by Jrslick22
Wed Oct 19, 2005 4:34 am
Forum: General
Topic: MAC Telnet not working
Replies: 8
Views: 4005

Found a tool for the job http://www.mikrotik.com/download.html#v2

thanks for the help
by Jrslick22
Wed Oct 19, 2005 4:29 am
Forum: General
Topic: MAC Telnet not working
Replies: 8
Views: 4005

The manual said that the factory MT RB's come with the address 192.168.0.1 attached to the ether1, mine is not responding to any of the factory ip addresses, hence the mac talnet.

is there any site that you know of where i can download it?

Cheers
by Jrslick22
Wed Oct 19, 2005 4:04 am
Forum: General
Topic: MAC Telnet not working
Replies: 8
Views: 4005

MAc

all of my mt are 2.8 i just got a new one 2.9 and donot yet have the 2.9 winbox

is there someware i can download it?
by Jrslick22
Wed Oct 19, 2005 3:58 am
Forum: General
Topic: MAC Telnet not working
Replies: 8
Views: 4005

Mac telnet

what is the command to mac telnet to a MT?

I am useing the telnet 192.168.X.X command and wish to mac telnet
by Jrslick22
Tue Oct 18, 2005 2:31 pm
Forum: General
Topic: Web Proxy problems
Replies: 9
Views: 2832

date

license exprires:Oct/01/2005

:D lucky me!
by Jrslick22
Tue Oct 18, 2005 2:23 pm
Forum: General
Topic: Web Proxy problems
Replies: 9
Views: 2832

yep

I did have the transparent proxy set up, the counters were going crazy as users started being redirected to the cache, but once again no web pages just error messages, i have disablesd the NAT rule untill i get it working from my machine. Is there some way i can check to see if i have run over a yea...
by Jrslick22
Tue Oct 18, 2005 12:37 pm
Forum: General
Topic: Web Proxy problems
Replies: 9
Views: 2832

Specs

running 2.8.23
AMD 1200
128mb
10gb - cache (only 4gb used)
64mb system drive (flash os)

How can i find out if i still able to upgrade the OS? dont you get 1 year of upgrades, then you have to buy a new OS CF disk or something?

Thanks very much
by Jrslick22
Tue Oct 18, 2005 12:31 pm
Forum: General
Topic: Web Proxy problems
Replies: 9
Views: 2832

Sorry mate

ip web-proxy> print enabled: yes src-address: 0.0.0.0 port: 8080 hostname: proxy transparent-proxy: no parent-proxy: 0.0.0.0:0 cache-administrator: webmaster max-object-size: 4096 kB cache-drive: secondary-master max-cache-size: unlimited status: running reserved-for-cache: 4087 MB ip web-proxy> I h...
by Jrslick22
Tue Oct 18, 2005 9:13 am
Forum: General
Topic: Web Proxy problems
Replies: 9
Views: 2832

Web Proxy problems

I’m having trouble with my web proxy i have it set up as per documentation, when i request port 80 traffic the clients counter goes up to 1 as does the requests, but ie still times out. The only other inconsistency is when I use the Check Drive command I get the error log: web-proxy error while chec...
by Jrslick22
Thu Jun 02, 2005 9:50 am
Forum: RouterBOARD hardware
Topic: Print commands
Replies: 1
Views: 1410

Print commands

does anyone know how to do a print of the entire config of a router?

Thanks
by Jrslick22
Mon May 09, 2005 7:46 am
Forum: General
Topic: p2p redirection
Replies: 1
Views: 751

p2p redirection

Can someone please help me with redirecting the p2p traffic to a different gateway.

I have a static route des 0.0.0.0/0 with a gateway 10.10.50.55

I would like all of my p2p traffic to go to a diffrent internet connection 192.168.240.10

thanks
by Jrslick22
Mon May 09, 2005 7:40 am
Forum: Scripting
Topic: P2P script
Replies: 16
Views: 7039

can you please post the details of how you made this work?
by Jrslick22
Sun Mar 13, 2005 7:23 am
Forum: General
Topic: Sectored Base Station
Replies: 21
Views: 3792

whats your email address?
by Jrslick22
Sun Feb 27, 2005 6:59 am
Forum: General
Topic: Sectored Base Station
Replies: 21
Views: 3792

why not use chan 1,6,11 and .....14? then you will have no overlap.

there is a firmware "upgrade" for the Senao cards that will give you the 14th channel.

I run 3 X 120deg sectors and an omni on the same pole, works fine for me.
by Jrslick22
Sun Feb 27, 2005 6:51 am
Forum: RouterBOARD hardware
Topic: Getting Access When Using UPS
Replies: 20
Views: 7472

No sure

It must be my good looks?

I just clicked post reply?
by Jrslick22
Wed Feb 09, 2005 12:33 am
Forum: RouterBOARD hardware
Topic: Getting Access When Using UPS
Replies: 20
Views: 7472

Smartups 700

I got my Smartups 700 going with no problem, I’m WinBox I just went system>serial console> and then un ticked the enable box. Then went to the system>ups tab and enabled ups support. Then that was that it works fine. What I would like to know is now that I have it all working how do I get it to send...