MikroTik

Jrslick22

CoA is not currently supported

Jrslick22

Does anyone know how to make it so under the http://UM-router-ip/user users are not able to change there passwords?
I am using MT established pppoe sessions so if they change the password on the UM the MT client will not authenticate.

thanks

Jrslick22

My 5.2 work fine. (well that part of it works fine).

Jrslick22

Yes i have noticed this, i add both address for the router, the send and the return, it works but you will get multiple entries under the customers logging.

Jrslick22

pppoe 1,2,3 on port 5, dhcp server on port 2,3,4

Jrslick22

i have an RB750 with a single wan port (ether5), i need to set this up so that three separate pppoe-clients can run with a separate dhcp server for ether 4-3 ether5-wan pppoe-client4-ether4-dhcp server network 4 pppoe-client3-ether3-dhcp server network 3 pppoe-client2-ether2-dhcp server network 2 no...

Jrslick22

Check under system>store>disk

there should be a disk called CF1

cheers

Jrslick22

So after having a good laugh at the "NOT TO DO. Weird installations thread", I just had to start a tech support thread so we could list the best tech support calls we have had. These are our favorite so far: 1st place: I'm having problems with my wireless connection. Can you tell me what s...

Jrslick22

You can run as many pppoe-clients as you want on one interfaces even without metarouters. Just make sure that you do proper policy routing: http://www.mikrotik.com/testdocs/ros/2.9/ip/route.php I have not been able to get more than one pppoe-client working at once. AP: AP-bridge running wds-mode=dy...

Jrslick22

So i have RB411AR: wlan1 assigned to bridge1 metarouter (mr1) with bridge1 pppoe-client assigned to bridge1 metarouter (mr1) with ether1 dhcp server on ether 1 wlan 1 with a pppoe client wlan 2 disabled This setup allows me to have two pppoe-clients running on wlan1, one for the main rb411 and one f...

Jrslick22

UM 4 has the option "Remove all" for logs. It can be used to delete all logs at the time. In version 3 if you deleted a log, a backup was created for it - so you could make an "undo" and restore that log. That means, the space was actually cleared only either after a reboot, or ...

Jrslick22

how are you backing this database up, i seem to have zero success with both /tool user-manager database backup as well as using the webgui maintenance save In console you can type /tool user manager database save name=mainsql.umb /tool user manager database save-logs name=logsql.umb Just tried a co...

Jrslick22

Cool, the RB1000 was trying to boot from the CF card, removing it got it running again.

Yep im really glad the new UM database was on the flash card, did u catch my post on how i was having trouble backing RC4 up http://forum.mikrotik.com/viewtopic.php?f=10&t=31907

Awesome!

Jrslick22

Ok well this is the thing, i was running 3.2X on a my rb1000 with my user manager DB on it, i have about 300 or so users, I have upgraded OS versions many times without a problem before but have been unable to back up the database due to the MT not having enough spare HD space (yes i have most of th...

Jrslick22

YES, you must use CF Card! how are you backing this database up, i seem to have zero success with both /tool user-manager database backup as well as using the webgui maintenance save Sorry dude i dont mean to hijack your thread, just having a really hard time with this rc4 release and really need t...

Jrslick22

Thanks Gerlach76
http://forum.mikrotik.com/viewtopic.php?f=10&t=31907

Jrslick22

How in hells name are you able to fit 3000+ users on a RB1000?
Must be using the CF slot huh?

Jrslick22

does anyone know if under v4 we are able to store UM data on CF?

My RB1000 reports that user-manager is active on CF1, it seems this is not correct, can anyone confirm they are using the CF?

cheers

Jrslick22

For anyone interested, this can be done using meta router, is a real nice way of using a CPE as a hotspot repeater while having the cutomer use pppoe and dhcp server

Jrslick22

i understand that it is still being tested, im just stating that this is not ready in the slightest for deployment. Alot of the other RC have been very good, this is not one of them. No offence intended MT rocks!

Jrslick22

Oh my goodness - donot install this usermanger if you can help it untill it is stable!

Jrslick22

It seems to sort of be working some of the time. geez this is buggy

thx

Jrslick22

My website is setup with a link to the usermanager so users can enter the usernames and passwords to check there usage, now that i have upgraded they get an invalid username and passord error. is there some trick with v4?

regards

Jrslick22

I have: RB500=r5h>pppoe-server+hotspot my normal config for customer is: rb411 customers pppoe: wlan1(station)>pppoe-client>masqurade>dhcp-server>ether1 I need to setup: RB11AR= wlan1(station)>pppoe-client1>masqurade>dhcp-server>ether1 {customers pppoe} wlan1(station)>pppoe-client2>bridge>wlan2(AP-b...

Jrslick22

Thanks mate, helps alot.

Jrslick22

Sorry i was refering to the -120..-80

Jrslick22

you can use the access list to make rules that limit signal strength. ie. users with signal below a certain threshold would not be allowed on your AP.
2009-03-25_1002.png

So this example will allow only clients with less than -80dbi to connect

Regards

Jrslick22

So the Latvian Government has Collapsed, how does this effect MT, were are the RB being made will production slow/cease?

Jrslick22

Is there some way to identify the type of radio (r52,r52h,r5h,XR2,XR5 etc) using the MT so I don’t have to take the back of the unit and physically look and see?

thanks.

Jrslick22

by chance does anyone now no how to clean the system disk as its still saying its got %0 free. I can see under store that there is a clean disk option for both the system and CF drives but im not game enough to find out what would happen if i clean the system drive (warning all data will be lost! cl...

Jrslick22

OK for anyone following this thread. go into store and copy any active user-manager store, before saving change the disk to CF1 and tick activate. I had to do this a couple of times as the the logs were reporting a failed copy. this should at lease sort you out long enough for MT to improve this fea...

Jrslick22

I already have a CF card in there being used by the cache (not running at the moment) under /store/ i get both the web-proxy and the user-manager as being active this is causing an error when i try to set edit the disk to CF1

thanks.

Jrslick22

People with the same problem

http://forum.mikrotik.com/viewtopic.php ... t=sessions
http://forum.mikrotik.com/viewtopic.php ... t=sessions
http://forum.mikrotik.com/viewtopic.php ... t=sessions

Might be time to look at this one please MT

Jrslick22

Well many months after owning a RB1000 i am back to the same old problem, that is no free space! So i have a 61.4MB of total space with 0% free. I have deleted all logs and still no free space. Remove some of the packages - already done Upgrade the OS and use a CF card you say, no can do - you need ...

Jrslick22

Me too

Jrslick22

Same problem here, did you find a fix, i have deleted 10 logs at a time (more than that seems to fail) untill i had enough space to turn logging off on all of my routers.

Any help from anyone else?

Cheers

Jrslick22

Where has the web-proxy package gone for RB1000?

I did not see it in the "all packages" download for v3.13 even though its listed under "view content".

cheers

Jrslick22

With only 64mb of flash and no ability to store userman on CF (comming soon im told) dont expect to store much of a user-manager database on this router without removing alot of your packages, logs and sessions.

just some free advice that has been expencive to learn.

cheers.

Jrslick22

Apacer 8gb high speed 300x is a no go in rb1000
Apacer 4gb 133 is good to go in a Rb600

can someone update wiki pls

Jrslick22

With only 64mb of flash and no ability to store userman on CF (comming soon im told) dont expect to store much of a user-manager database on this router.

just some free advice that has been expencive to learn.

cheers.

Jrslick22

I have been told by MT that this feature is 3-4mths away.

Jrslick22

is there anyprogress on the cf option?

Jrslick22

Just in case you thought this was solved....its not.

please help

Jrslick22

This might seem like a dumb idea but can anyone from MT help me please.

How can i put the user manager data base on the CF card of a RB666 and with the CF card fail quickly due to high read writes?

Jrslick22

I have a rb532 with user manager on it over the last few months it has begun to show signs of not being able to handle the traffic What 'signs' is it showing? I've just had a 532 stop responding with zero space left on the HDD. It had been running a hotspot on a public PC in a backpackers for about...

Jrslick22

Can anyone help please, RB532 seems to be getting worse each day

Jrslick22

I have a rb532 with user manager on it over the last few months it has begun to show signs of not being able to handle the traffic so I am (trying) moving the user manager to a RB600. When I log into the RB532 and attempt to save the database I get: Action timed out – try again, if error continues c...

Jrslick22

I only use 600's for my sites now, 3 radios ant enough from the 333, there cheap enough as well.

Jrslick22

Wonderful, thanks very much.

Jrslick22

Anyone from MT? Please

Jrslick22

anyone please

Jrslick22

I have a main router with a masquerade rule setup on it for all traffic out of my public Ethernet interface. this router(a) is connected to a second router(b) on a p2p link using RIP, the second router has the customer(c) on it (pppoe) with a public ip assigned to them. I want to setup a firewall ru...

Jrslick22

i have tested 411 too as wds bridges.At table with ROS 3.3 i`ve got stable 3 MB/s (24 mbps) with 5Ghz and around 5 Mb/s(40 bmps) one way with nstreme enabled.
Good numbers

But are they with TCP or UDP? Can you try with both directions?

yep real nice numbers

Jrslick22

The default "5ghz" setting is 20mhz wide... "5ghz-turbo" is 40mhz wide.

Travis

In 5ghz i only have %ghz, 5ghz 10mhz, 5ghz 5mhz. its an R52h, would country code restrict this?

regards

Jrslick22

Hi, How large of a channel are you using? 20mhz? 10mhz? A rough breakdown with your hardware: 10mhz channel is going to provide about 15Mbps maximum (one direction at a time) 20mhz channel is going to provide about 28Mbps maximum (one direction at a time) Also, are you using Nstreme? On point to po...

Jrslick22

I have a RB333 with a point to point link to a RB133c i get -65dbm signal, 38db Sig to noise, link reports 36/36Mbps. When i do a bandwidth test on this and any of my other p2p links i can never seem to get over about 10-12Mbps tcp. other links include RB533 to RB333, RB533 to RB533s Id love to get ...

Jrslick22

What I ended up doing is to backup mikrotik, clear to factory settings and re-install all my settings. Then added a script which deletes logs. CLEAR USERMAN LOG SCRIPT: :local Flag :set Flag [/tool user-manager log find] :if ([:len $Flag] > 0) do={/tool user-manager log print append file log;/tool ...

Jrslick22

Skip that last comment i rebooted a couple of times and pugged and unplugged a couple more times and it has come up Although now the interface disconnects every 30 or so seconds and the logs say "could not acquire serial port" Ideas thanks Ok i have it all set up and running great, howeve...

Jrslick22

Im trying to work out what theses settings are for the E220 within New Zealand/Australia: We used: /interface ppp-client print 0 X name="ppp-out1" max-mtu=1500 max-mru=1500 port=usb1 user="" password="" profile=ppp-LMT phone="*99***1#" dial-command="ATDT&...

Jrslick22

Skip that last comment i rebooted a couple of times and pugged and unplugged a couple more times and it has come up

Although now the interface disconnects every 30 or so seconds and the logs say "could not acquire serial port"

Ideas

thanks

Jrslick22

I also have a Huawei E220 plugged into my RB230 running 3.3

Under resources i can see 1:2 Huawei Tech.., Huawei Mobile 12Mbps

Anyone know why when i try and set up the new ppp client i am unable to choose usb, the only option i have is serial0

cheers

Jrslick22

Im at 198,000 this is starting to become a bit of a problem. anyone?

Jrslick22

after about 5hrs if messing about i managed to get rc9 back on, my advice if your using 133c's dont put rc10 on em

Jrslick22

only other clue is power on single chirp, after boot double chirp, 10 seconds later about 8 seconds of repeated chirping.

this must help, someone from MT pls

Jrslick22

says its already installed.

its not as much of problem as i can even log into it now.
hyper terminal just says login but wont let me type or enter anything after everything seems to load ok.

got bigger problems than pppoe!

Jrslick22

am setting up 6 RB133c for installing tomorrow have upgraded them all to v3rc10 cannot find pppoe client.

http://www.mikrotik.com/pricelist.php?sect=1

please help has it been moved by chance, can i downgrade to another version that supports PPPoe client

thanks

Jrslick22

Upgraded RB230 to 2.9.46 now no minipci card show, nether on the pci slot or the mini pci slot, any ideas?

logging doesnt show any errors

cheers

Jrslick22

three choices: 1. find the official Brazilian (or "insert country here") documents and forward to mikrotik, so we can update our lists in the next versions 2. get a custom frequency license to override the limitations and use whatever you want 3. use a country setting with the right freqs...

Jrslick22

it seems the 5.4ghz channels are not avalible for Brazil in 3.0

Does any one know the contry to select to make the 5.4ghz channels avalible under 3.0?

It sure would be nice to be able to use the legal channels in our contries without this dicking around.

Jrslick22

Does anyone remember how to Hard Reset the RB230 someone disabled all the lan interfaces and the win box loader is not picking it up on the mac side.

Cheers

Jrslick22

Sounds great, web site?

Jrslick22

I have a second 333 coming out of a site soon so ill be able to test them side by side.

Honestly it wouldnt even boot with no cards in it on 12v, 18v no provlem and yes i have used diffrent bower pac's cables and a combination of pppoe and DC jack

Jrslick22

I disagree.

It worked the same on the bench top with no other MT plugged in.
It is working fine now that it is on an 18v inverter.

besides most electricians are dumb arses anyway.

Jrslick22

it is a 13.4v 1200Ah battery bank powering 6 other 532 MT's

...and before it is suggested that is about 2.5amps worth of MT's, 80amp - 2.5amps = 77.5 i don't think its a batterys cant provide enough power issue, i may have just got the one out of every 1000 with the doggy power regulator.

Jrslick22

cable length 5 meters
radios xr2, xr5, r52h

even with no radios in it is would not boot reliably on less than 18v.

Ive put a 5 amp lamp on the end of the power cable, it ran fine drawing all 5 amps according to the meters

as far as i can tell the MT only draws around 300-400ma

Jrslick22

well buggar me, how many amps is it drawing?

Jrslick22

We have tested it here and it does work. You probably have a voltage drop on the cable or from your battery supply. Please use a multimeter to measure the input voltage on the board. you have it running on 12v do you? how many radio's what kind, i couldnt get it to boot reliably on a bench top even...

Jrslick22

I know what it should do the point is it don't. i have a 12 solar site that provides up to 80 amps @ 12v to our inverter but will it run a RB333? NO. has all sorts of problems, brought a 18v inverter no problem since. Write this down if you plan on running one on 12 or less, it wont work! Sorry to b...

Jrslick22

I cant be the only person who's using a rb333 as there gateway running RIP, can i?

can anyone help

Jrslick22

Jrslick22

yes your right thats what the manual says, buy one and try it and you'll see what i mean.

It will only boot off 12v if it has no radios in it.

Jrslick22

3 sectors, 3 radios, 2 RBs,

Jrslick22

the newer RB333 supports voltage monitoring, but it wont run off anything less than 18v so thats probably not going to help anyway, cool aye.

Jrslick22

Seems as though the RIP issue mentioned has not been sorted in RC5 ether

Jrslick22

right i get it, so your essentially telling router 1 how to find the other side of router 2. i assume if i have mor than one interface on router 2 i will need to add a second route to router 1 telling it how to find this subnet also. not sure how to test it, has not appeared to have made any differe...

Jrslick22

ok doesnt seem very difficult router1 (gateway rb333) wan IP x.x.x.x--wlan IP 10.10.120.1/30 AS 0.0.0.0/0 GW x.x.x.n where x.x.x.x is my public address and x.x.x.n is the upstream gateway router2 (2.9.46 running RIP) wlan IP 10.10.120.2/30 ip route add gateway=x.x.x.n dst-address=10.10.120.1/30 is t...

Jrslick22

oh i understand, yes you are right 2.9.46 on the old.

Im not that up on adding the static routing to overcome this, where would i begin?

Jrslick22

it is not the internet connection because when i switch back to the old router it works fine.

where would one download rc5?

thanks

Jrslick22

Just replaced my gateway MT with a rb333, set it up with a public IP on eth 1 and a r52 in a point to point link into our network, running RIP routing, defult route out, masquerade, firewall port 22, 23, 80 on the wan side, honestly nothing special or unique. have compared it with the old unit (2.9....

Jrslick22

Ive just come back from a day at one of our solar and wind power sites, I tried for several hours to get the RB333 working reliably and could only do so when I installed my notebook car adapter which inverted the 13.8-14.4v power up to 20v even with only one R52 installed it just would not boot reli...

Jrslick22

I replaced a EMP-8602 with an R52h, now my client that was getting 86db is getting 95db, no other change was made, output power is set to default on both, MT is running 2.9.44

ideas?

Jrslick22

Where is the country select for 2.8.x i have an old RB230 that is not set up correctly so i am unable to access some of the channels for my country?

Jrslick22

Hi all, the latest release of the Usermanager 2.9.29 has the function in the administrative web console to reset selected users counters. Top marks Uldis/Mikrotik team thanks for listening to our requests. Geoff I cant seem to find the reset counters button within the console, i see the select all ...

Jrslick22

same thing here, Gov has just made 5.4 usable spectrum, what do we have to do to utilize this band?

Jrslick22

found it.

thanks anyway, great script.

Jrslick22

This is an update of my original post here. I have not had time to update my backup scripts since way back when I asked MT to add a find command to the system history command. Well, in 2.9.29, they added it for me, so now my backup script is able to determine whether the "admin" user has ...

Jrslick22

Please anyone?

To overcome the problem in the sort term I have assigned the public address to the gateway MT and then dst-nat all the traffic to the private address

Jrslick22

but it is possible with some script help.

Anyone? please?

Jrslick22

I have a MT with my public ip on eth1, I have another MT connected to the first with a wireless link, this second MT has all my wireless pppoe clients on it using private ip addresses. One of my clients on this MT would like a public IP, I know how to assign him the address but I’m not sure how to m...

Jrslick22

me too please

Jrslick22

By the way, aside from power voltage monitoring, it would be very nice if the RouterBOARDs can shut down if the power supply is under some voltage. I have seen lots of cases, where wireless modules lose their config, or sometimes (happens a lot with CM9) have their configuration eeprom destroyed. i...

Jrslick22

More info:

Ive cleared the winbox cache already

I can winbox to all my other MT but this one.
I pass through this MT to get to my others.

cheers

Jrslick22

when i try to winbox to a remote router i get:

Missing RouterOS winbox plugins

Ideas?

Jrslick22

Feature request

I vote for course threading on the riser screws instead of fine RB502

Jrslick22

Im also running (trying) the dude on 2003 server and am getting no snmp information.

diffrance is i have no snmp service to open? does it have to be installed or what?

im looking under -management-services&apps-services

no snmp at all.

cheers

Jrslick22

Mangle the traffic from your 192.168.250.X network and mark packet. Then once you do that setup a route based on that marked packet.

This is what im looking for, thanks for the help.

I am not looking to load balance.

Thanks

Jrslick22

I have a mikrotik with two gateways 1. 10.10.100.55 2. 10.1.1.1 I currently have two static routes 0.0.0.0/0 GW 10.10.100.55 0.0.0.0/0 GW 10.1.1.1 By disabling one or the other I am obviously sending my traffic out ether gateway I also have two networks 192.168.250.X 192.168.251.X I want to send all...

Jrslick22

Cheers Tom

Jrslick22

Im not that good at firewalling with the MT yet, will this rule stop all outgoing port 25 traffic that does not come from my mail server(192.168.238.253)? chain=output src-address=!192.168.238.253 protocol=tcp dst-port=25 action=drop I was told to block all outgoing mail not comming from my mailer b...

Jrslick22

Ive lost my password also, although im sure its the right one, is there a work around?

PM me to please

Jrslick22

How about sorting out the RF leakage (88mhz), that be a real good idea.

Jrslick22

you would drop all p2p

Jrslick22

Thanks for the help guys. Mac's part works like a trick, i can see the counters for both packet and connection mark working and counting together. cheers Skillful, the rule does not seem to stop the 10.10.54.0 subnet? does the rules have to be on the wireless MT? i have one as my gateway, the other ...

Jrslick22

ok ive set up the connection mark: chain=forward p2p=all-p2p action=mark-connection new-connection-mark=p2p-conn-drop passthrough=yes and then the firewall rule: ;;; p-2-p Control chain=forward src-address=10.10.54.0/24 dst-address=10.10.54.0/24 connection-mark=p2p-conn-drop p2p=all-p2p action=drop ...

Jrslick22

Anyone? MT please?

Jrslick22

Anyone? MT please?

Jrslick22

what a fitting end for a mac

Jrslick22

I got clients connecting via pppoe using mppe 128 statefull encryption via the use encryption option under the pppoe profile. when clients use SMC pppoe routers a mppe 40 stateless connection is established which does not work. If I turn off the use encryption option it works fine.

any ideas? thanks.

Jrslick22

ok ive updated the rule but p2p still gets through. With the src and dst addresses removed the rule works fine.

chain=forward src-address=10.10.54.0/24 dst-address=10.10.54.0/24
p2p=all-p2p time=7h30m-22h,sat,fri,thu,wed,tue,mon,sun action=drop

Jrslick22

Question1 probably won't work.

I learned it hard way. Problem is that most of the standalone devices, when you attach them using survey option, does not lock just to SSID but to MAC of the AP too. If you change AP device and use the same SSID, MAC is different and clients do nto connect.

I agree

Jrslick22

i have a p2p firewall rule set up like this add chain=forward p2p=all-p2p time=7h30m-22h00m,sat,fri,thu,wed,tue,mon,sun \ action=drop comment="" disabled=no it works fine. I want to make it so that the rule only applys to certin ip ranges, so i added this: add chain=forward src-address=10....

Jrslick22

Chap is encrypted so sniffing user names and passwords I was told would still be tough. Under the pppoe profile I also have use encryption on, don’t really no what it does though?

Jrslick22

I have been happily running pppoe authentication across my 2.4ghz wireless network for about a year now without any problems and wanted to know how secure it actually is? I am using mschap1 and 2 and have a free radius server running as an access concentrator. I do not use mac tables as users enjoy ...

Jrslick22

I have MT running over 60+ Km and get 3-5ms pings, i also have 50 clients hanging off 1 200mw card without any probs, MT's Rock

Jrslick22

Ive got a 400MB microdrive in my MT 500, still cant get it to work

Jrslick22

thank for taking the time

Jrslick22

Would it be ok if i email you instead as i prefer for the network map no to be posted on a public forum?

Jrslick22

can i try it on just afew of my router or do you have to use it on all of em?

ill put every thing together and post it on a web site for you.

Jrslick22

I’m running RIP with static routes pointing to the next MT up the line, id like to implement OSPF for multipath but am scared it will mess everything up in the process, can it be setup to run in parallel with RIP before RIP is removed?

Jrslick22

im using RIP, but would like to run OSPF, any chance of some help setting it up?

Thanks

Jrslick22

I changed over to PPPoe about 2 year ago and sure am glad that I did, with no IP address assigned to the wireless interface its a lot more complex than spoofing a mac address and putting in the right IP, also the less the customer has to set up the better ie IP addresses etc, once they have followed...

Jrslick22

I’m running a MT with a bunch of wireless clients connecting via PPPoe, I am wondering if under the pppoe profile I should turn on compression and encryption/require encryption? Would it slow down the connections due to the encryption element? Would this form of encryption even work or is it another...

Jrslick22

Click add (+ sign) then go down to link, then click on your device and drag the line to the other device

Jrslick22

Is any one running 2x SR5's and 2x CM9s in an RB500?
im told it wont work as the SRs draw to much power?

Jrslick22

I have had a simalar problem, that was due to radio problems not drivers or MT. antennas were to close togther and the channels were overlaping

Jrslick22

sure are

Where? im in Hamilton

Jrslick22

Have you been able to get one card working right as an AP? (the other card not in the RB)

Jrslick22

web-proxy is an additional package which when installed.....still doesn’t work?? well i cant find any other traces of web-poxy apart from listing installed packages, any ideas?? web-proxy package is only avaible on x86 instalations of MT, for the RB532 there is web-proxy-test package and you will f...

Jrslick22

is it a PCMCIA card? you'll need to flash the firmware to work with 14 chan

Jrslick22

How close are the sectors physically located to each other? do you have channel separation?

Jrslick22

How do they run when they are not bridged?

Jrslick22

Are you in NZ Chris?

Jrslick22

Nope not there, assuming its still found under ip>web-proxy

Jrslick22

web-proxy is an additional package which when installed.....still doesn’t work?? well i cant find any other traces of web-poxy apart from listing installed packages, any ideas??

Jrslick22

I have installed MS2000, XP & XP Media successfully on a $100 thin client.

you get all the USB VGA ports to which is nice.

Jrslick22

I have installed the web-proxy package (confirmed in installed packages) and cannot seem to find ip>web-proxy anyware

Jrslick22

I have also installed this package (confirmed in installed packages) and cannot seem to find ip>web-proxy

Jrslick22

1 run 50 512 users of a single b sector fine

Jrslick22

Could I easily implement ether Chap or MSchap1&2 and still have my XP or Raspppoe users authenticate? Which would be the most recommended protocol to use? How would it be done on the clent side?

Thanks

Jrslick22

I figured this was the case but know not where to go to find the help to fix it. I would prefer to broadcast the SSID as it does a lot of free advertising for us, sounds like I need to hide it though. Most of my clients connect to our network via a cheapo bridge like the Dlink 900ap+ or the 810+ or ...

Jrslick22

I currently have a bunch of users hanging off a MT with a couple of prisms in it, (default authenticate) and then we use PPPoe for authentication (pap+FreeRadius). Apart from the authentication I don’t use any other security. There is also a CM9 which connects to the backbone providing access to the...

Jrslick22

Found a tool for the job http://www.mikrotik.com/download.html#v2

thanks for the help

Jrslick22

The manual said that the factory MT RB's come with the address 192.168.0.1 attached to the ether1, mine is not responding to any of the factory ip addresses, hence the mac talnet.

is there any site that you know of where i can download it?

Cheers

Jrslick22

all of my mt are 2.8 i just got a new one 2.9 and donot yet have the 2.9 winbox

is there someware i can download it?

Jrslick22

what is the command to mac telnet to a MT?

I am useing the telnet 192.168.X.X command and wish to mac telnet

Jrslick22

license exprires:Oct/01/2005

lucky me!

Jrslick22

I did have the transparent proxy set up, the counters were going crazy as users started being redirected to the cache, but once again no web pages just error messages, i have disablesd the NAT rule untill i get it working from my machine. Is there some way i can check to see if i have run over a yea...

Jrslick22

running 2.8.23
AMD 1200
128mb
10gb - cache (only 4gb used)
64mb system drive (flash os)

How can i find out if i still able to upgrade the OS? dont you get 1 year of upgrades, then you have to buy a new OS CF disk or something?

Thanks very much

Jrslick22

ip web-proxy> print enabled: yes src-address: 0.0.0.0 port: 8080 hostname: proxy transparent-proxy: no parent-proxy: 0.0.0.0:0 cache-administrator: webmaster max-object-size: 4096 kB cache-drive: secondary-master max-cache-size: unlimited status: running reserved-for-cache: 4087 MB ip web-proxy> I h...

Jrslick22

I’m having trouble with my web proxy i have it set up as per documentation, when i request port 80 traffic the clients counter goes up to 1 as does the requests, but ie still times out. The only other inconsistency is when I use the Check Drive command I get the error log: web-proxy error while chec...

Jrslick22

does anyone know how to do a print of the entire config of a router?

Thanks

Jrslick22

Can someone please help me with redirecting the p2p traffic to a different gateway.

I have a static route des 0.0.0.0/0 with a gateway 10.10.50.55

I would like all of my p2p traffic to go to a diffrent internet connection 192.168.240.10

thanks

Jrslick22

can you please post the details of how you made this work?

Jrslick22

whats your email address?

Jrslick22

why not use chan 1,6,11 and .....14? then you will have no overlap.

there is a firmware "upgrade" for the Senao cards that will give you the 14th channel.

I run 3 X 120deg sectors and an omni on the same pole, works fine for me.

Jrslick22

It must be my good looks?

I just clicked post reply?

Jrslick22

I got my Smartups 700 going with no problem, I’m WinBox I just went system>serial console> and then un ticked the enable box. Then went to the system>ups tab and enabled ups support. Then that was that it works fine. What I would like to know is now that I have it all working how do I get it to send...

Search found 167 matches