MikroTik

kanuns

Netinstall and learn a lesson the hard way.

I did - its bitter tasting medicine.

kanuns

When you still have admin access to the router you can use the /export command. /export show-sensitive file=routername Then you download the routername.rsc file from the router and save it. Sorry but there is no method to recover lost access to the router and keep the configuration. You need to app...

kanuns

But I havent done anything. Its the first screen I am getting.

So now my only chance is to reset the router?

just for my knowledge, can you please also tell me what is the scenario on which the textual configuration is exportable ?

Thanks in advance

kanuns

Hi,
I am not able to see any Textual Config option. Can you please help me in this regard. Where can I export the existing configuration so that I can check what the user configured before hacking. Is that also possible to get the password of the users?

Regards

kanuns

Well, thanks, I wanted to get the Textual config. Ill try this netinstall thing. Many thanks.

kanuns

I have a router, both have version 7.10. I normally logged in as usual but suddenly I have not been able to change any critical setting or open a terminal. I cannot backup or restore settings. Now I see that there is a user System and it has full rights. By default admin users has normal rights but ...

kanuns

Thank you, This is the solution You dont need both. Remove mangling , not required. If you simply want a specific IP address to use WAN2 /add table fib name=useWAN2 /ip route add dst-address=0.0.0.0/0 gateway=ISP2-gatewayIP table=useWAN2 /routing rule add src-address=LANIP action=lookup table=useWAN...

kanuns

try this way /routing table add disabled=no fib name=isp2 /routing rule add action=lookup disabled=no dst-address=0.0.0.0/0 src-address=192.168.88.226/32 table=isp2 /ip route add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=ip%ether2 routing-table=isp2 scope=30 suppress-hw-offload=no target...

kanuns

Thanks, ill check today and reply back

kanuns

its version 7. 11

kanuns

Anyone ?

kanuns

Hi Hope you are fine I have 2 internet connections and both have public I have RB1100 One ISP is connected to port 1 and the other is connected to port 2 Both ISP work fine when I connect/disconnect the ISP. What I want to do is, I want to use different ISP for different internal hosts. What I have ...

kanuns

yes DHCP Client is disabled because this router is given a static IP 192.168.154.10 on port 1.

Can you help me if I send you the packet sniffing file ?

kanuns

I guess there is no solution for me in this community

kanuns

Anyone ?
any solution for me ?

kanuns

By the way, I have connected this router to switch and APs Unifi AP AC LR, connected on that switch. Not all devices are getting disconnected.

kanuns

Thank you for the reply # jun/15/2023 15:50:03 by RouterOS 7.9.2 # software id = I25Y-SCVH # # model = CCR2004-16G-2S+ /interface bridge add name=SIP add name=bridge1 /interface ethernet set [ find default-name=ether1 ] comment="WAN Mikrotik 150X3=450Mbps" set [ find default-name=ether2 ] ...

kanuns

hopeless I am i guess.

kanuns

does anyone has any idea about it ?

kanuns

Can anyone please please help

kanuns

Hi I am facing a strange issue which has never occured before. My many devices which are normally connected via the same wifi are not connecting now after a restart. They connect and disconnect. In logs i get dhcp1 assigned XXX for MAC:XXX dhcp1 deassigned XXX for MAC:XXX And this is continuously ha...

kanuns

Brother, to be honest, I was totally blank and needed an advice. I didnt think of anywhere else beside this forum. I needed someone to guide me to the right direction. which you did. And I am thankful for that

kanuns

I am going to have the switch with me and will do the settings, at the moment i have replaced it with my beloved Mikrotik Switch and it working fine. But I dont have more Mikrotik Switches, so I have to do the Cisco thing. I will contact you once I have done what you have told me to do. Many thanks ...

kanuns

Please ignore my ignorance and help me I have configured a port i.e. Port 2 as Trunk. what I did was: #interface gigabitEthernet0/2 #switchport trunk encapsulation dot1q #switchport mode trunk #switchport trunk native vlan 1 #switchport trunk allowed vlan 1,21 This is connected to Mikrotik Now the A...

kanuns

I didnt say that the problem is exactly with mikrotik I jest needed help. Why do you think the problem is on the MikroTik side instead of the Cisco side? You gave the hint Hint, you need to create "trunk" ports on the C3750 that allow both the untagged vlan for that i want to say, "TH...

kanuns

Hi, I need config help. I have configured VLAN and everything is working fine when I connect the AP (Unifi AP AC LR) to my router directly. The AP has 2 SSID one with VLAN tagging and other without one. The issue is that I have many other APs also. The switch I have is Cisco 3750. Now when I connect...

kanuns

Anyone any idea ?

kanuns

Hi, I dont know if this the right place to ask this, but I am kind of stuck and require help. I have setup Freeradius 3.0 and Mikrotik as hotspot. it is working fine. The only thing I am missing is that I want to user to be able to login via MAC-Cookie. My previous setup was normal hotspot and every...

kanuns

MKT Router (192.168.10.20/24. This router is bypassed as we cannot login)

Bro I mentioned this in my original post that the router is bypassed - as a router cannot login so I have bypassed it.

kanuns

I know this is an old post, but as no one replied and now I am facing this issue again, can anyone please help me in this ?

kanuns

anyone ???

kanuns

hi How are you guys? i need an advice. i have a hotspot which is working fine; and I have installed another mikrotik on that. consider the scenario below. Hotspot(192.168.10.1/24) | | | MKT Router (192.168.10.20/24. This router is bypassed as we cannot login) | | |(wireless bridge (192.168.15.1) | |...

kanuns

Update: I copy pasted all the settings in 1100AHx4 and everything was fine. Now, the CCR; it is also ... FINE. I just used a AIR Blower to clean the RACK and specifically cleaned the CCR as it was no doubt very very dusty. Turned on again and it started working like it should. I personally dont know...

kanuns

Yes, the 1000 users are affected as their internet speed which depends upon the profile of hotspot, all is limited to 7mbps. Its a 24/7 space. I will have to go the long way. Please check the attached picture. I am using the 68.0/24 series, and it is not limited as it the bridge connected to Server....

kanuns

Nothing was changed. We cant change any settings because this is running in production environment. I have almost 1000 devices connected to this router. No change was made otherwise they would have an easy license to kill me :-) . I am arranging a 1100AHx4 and will do the setting manually and than d...

kanuns

Update: I upgraded the routerboard firmware and it is now v7.5. At first the port to port speed was 1gbps now is just 100mbps. What i have tested is, anything that is nat-ted is limited to 8 mbps. And it does not matter if it is going outside the network (going to internet) or staying inside (going ...

kanuns

Hi all, I have a strange issue, and it started a few days ago. I have CCR1016-12G. I have Hotspot on few ports and some other ports. My Internet is on ether1 and It was running fine. But now, none of my devices can get speed beyond 7mbps. I have changed the ISP and it is still giving the same result...

kanuns

Thanks for the reply.

no, this site is just for this hotspot purpose. And there will be no more additions. There can be more users, e.g 200 more or less, but the router's primary purpose is just Hotspot.

Many thanks for the reply.

kanuns

Hello All, I have a site where I have 857 users connecting via hotspot. Each user will have 2 devices, so the total devices connected to the router will be 1714. They will have dynamic queues made by Hotspot speed limit. Maximum internet throughput is 500mbps. I am planning to use CCR2004-16G-2S+ as...

kanuns

Can anyone give any advice ?

kanuns

Hi all First of all I would like to thank the mikrotik guys that you have done a very good job with the router OS. I need some advice regarding the hotspot portal I have made. I have a small service in my hotel, which, once the user logs in, as a trial user , I want him to be forwarded to my enterta...

kanuns

Why not whatever SSID the perso connects to initially determines what network he belongs to............................. ssid1= vlan10, ssid2=vlan20 and so on??

Well that can be a good solution. Let me check and revert back to you. Thanks for the idea

kanuns

How did the user join to begin with? WLAN? Well, I have a bridge port, and under that i have 2 Ether ports (as slave). Hotspot is working on the main Bridge. On the ether ports, I have attached Unifi devices. I dont mind changing the ports. I just want to achieve the functionality. Again: 1 port (a...

kanuns

Dear All, I hope you are safe from the virus and enjoying quarantine. I have a question. I have a bridge port and on it I am running a Hotspot. What I want to do is, when User "A" is connected and logs in via its login, the router should move it to the vlan assigned to that user. Is that p...

kanuns

Yes, also the other device must support the same frequency, and the antenna must be able to work. For example, some MikroTik CPE devices support 2.7GHz in the chipset, but antenna gain will be 30% of normal, if you use such frequency, so distance will be much smaller than maximum possible. You can ...

kanuns

Many thanks for the reply. Yes I understand that I need a license for that; so that is why I will be testing it and will be working in a small factory where cable laying is not possible - make ptp links of devices and provide 2.4ghz to users for wifi. lets see how the results come out. factory has s...

kanuns

Hi,
Quick question.

The super channel in wireless in mikrotik devices, it shows 27xx mhz (in case of 2g band) is this really 2.7ghz frequency?
And
same in the case of 5ghz frequency, it shows 6ghz, is it really 6 ghz or just something that I cannot understand

kanuns

Hi, thank you for your reply what i meant was, that if I give an IP to the bridge i will be able to login to the routers which are working as a switch, but i guess this will make it routing, not switching. I guess that the only option I have is to run 2 cables, 1 just to access the router just to se...

kanuns

Again many thanks for your reply and time. Last question, if I leave it the way it is, I am not able to login to any of the APs (or the router with wifis). how about i give the bridge port's ethernet port an IP and make bridge on just the WIFI ports. That is how the routers will have independent - b...

kanuns

Ok, thanks, I learned something new just now that hardware offloading can be done on only 1 bridge port at a time. I made 2 bridges HWoffload didnt activate on the second one. So deleted the first and it started working on the second. Any more advice that can make storms like broadcast etc ?? Moreov...

kanuns

Wow, many thanks for the quick replies. So, there is no issue when it comes to Wire, but when the users get connected to Wlan then the CPU will be used - and nothing can be done about it. Meaning: Main Router-------->Router One's Port 3 [Bridge port (port 3,4,wlan)] --------> Router two's Port 3 [Br...

kanuns

Hi everyone. I need to ask you a question. I have a need to daisy chain 3 mikrotik routers. I want to use them as access points, it will be like the following. Main Router-------->Router One's Port 3 [Bridge port (port 3,4,wlan)] --------> Router two's Port 3 [Bridge port (port 3,4,wlan)] --------> ...

kanuns

Dear All, I have a strange query. I have made hotspot for users which is working as expected but I need some tweaking. The hotspot has just few MBs for users; what we required was that the users to get the login page but no internet and use the LAN services. Internet was provided just to make the ho...

kanuns

There will be 9 CPEs Almost 10 to 15 clients per CPE. Maximum distance will be 500 ft. The ninth CPE will be at 500ft, 8th CPE will be at 60 less meaning at 440 ft. 7th cpe will be at 380 ft and so on. I was thinking of HAP AC as CPE and Netmetal 5 triple with Sector Antenna as Backbone (Netmetal's ...

kanuns

Ok... An outdoor router such as basebox (or any other mikrotik equipment with 5ghz n/ac) with sector antenna will be mounted. My CPEs will be mounted in on a Fiber Wall inside the room. It is like, mounting the HAP AC on a thin fiber wall and behind the wall, approximately 500 ft will be the backhau...

kanuns

Hello All, I hope you are doing good. I need an advice for a strange problem. I have to make a wireless solution where an AC equipment with sector antenna will be used as AP, with which the clients will connect. But what I need to know is, which of the mikrotik equipment should be suitable to conn...

kanuns

Thanks

Check the diagram. So this is what I want? the port on which the AP is attached is running hotspot. Bridge is just passing data to and from server.
Please do comment.

kanuns

Thanks for that. How about I create a bridge of just 2 ports. 3rd port will be connected to the AP. The AP will run a hotspot to only allow the specific user. Suppose the Hex in middle, the user pc will fetch data from the server via port 1, other ports in the bridge will switch the data for the nex...

kanuns

By daisy chain I actually mean to switch data on wire speed, not pass power via hex. apologies if I caused misunderstanding.

kanuns

Thank you for your reply. Yes you are right. No, now I am not going with ether-bonding now as the data isnt much. However, I kind of need help in daisy chaining the HEX. is it possible? Including a mikrotik router will have many advantages for me in the long run, so I cant just settle with an AP. an...

kanuns

Unfortunately, I wasnt able to get CAP AC in my part of the world. So what I am trying to do is, couple Hex with Unifi AP AC. I will daisy chain 4 HEX and connect Unifi with Hex. I dont have much data to transfer, from the end router to the 1st one. The maximum peak I will reach will be 200mbps from...

kanuns

And CAP is also a router - not a switch, so i should be fine with 4 to 5 daisy chains as I am not forwarding much data. Am i right? By the way, is it possible to daisy chain the "cAP ac" Not for providing power, but to forward data? cAP ac has a two-port ethernet switch built in ... so yes...

kanuns

Thank you for your reply.

I am going to test something, I will reply back.

By the way, is it possible to daisy chain the "cAP ac"
Not for providing power, but to forward data?

Any one has any idea about it ?

Regards

kanuns

Hi hope you all are good. I have a strange question, because i have a strange situation. I need to know if I am doing it right. There is some place where I cannot run fiber. and the data that needs to go is more than 1.5 gbps (video files need to be transferred). Again, fiber is not a choice for me ...

kanuns

Any ideas anyone ?

kanuns

Hi This is my first post, so please dont mind if i make a mistake. I have made PCC and added 3 WANs on my HEX, 5th port is of LAN to which I have added another mikrotik and applied all the user policies on it. 3 WANs failover is also working fine. What I want to do is, that sometime due to the fiber...

Search found 66 matches