Hello, I have a conundrum. I have max 20 workstations connecting to the internet. Until a while ago before I got angry I had only 1 ISP - ADSL. This ADSL is crap but is the only ISP I have nearby that can provide me with a static ip (don't ask why - for now it is what it is) I need this static ip to...
Hello, I need help how to configure my RB 3011UiAS to route connections from external clients through a L2TP VPN tunnel to 2 local ip addresses. Basically what I need is a . To enable a connection from external clients connecting through our public IP through the VPN tunnel to a postgresql database,...
Dear All, In a nutshell; I have a Dual Wan PCC Load Balancing connection - which seemed to finally working fine (thx Sebastia - You're clues helped). My band width usage and my internet connection finally looked good BUT... My external accountant got cutoff from my file server and Postgre SQL databa...
Here You go :) Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit 0 A S dst-address=0.0.0.0/0 gateway=192.168.2.1 gateway-status=192.168.2.1 reachable via ether3-lte check-gateway=ping distance=1 sc...
Hello again and thx for Your support.. In the mean time I tried a few things one of them was to traceroute 8.8.8.8 - and it seems I'm onto something. This is using the traceroute tool when I tell the router to use the correct interface and the correct routing table: Screen Shot 2019-06-28 at 16.01.0...
Thanks Sebastia for the hint. I'm sorry to say I am not a guru and although Your answer is very welcome, to me it is a bit cryptic :) I'm (re)searching where I can change the TTL to check my pings. I will let You know what I find. When I try to change TTL pinging to my ISP it tells me: ping: -I, -L,...
Hello, I have a strange situation and need any help available. My location is very unfortunate with regards to ISP providers I have to stick with a ADSL provider which is not optimal because it gets cut off fairly often and my ADSL modem goes crazy. We analyzed the problem and what we have is a band...
Hello, I have a similar situation. This is my setup: https://pasteboard.co/IlkPNxn.png ADSL Modem is simple TP-Link ADSL Modem LTE Modem is simple Huawei LTE modem (working as only LAN LTE provider) Router is RB3011UiASm Both ISP are connected through ethernet ports to the router. The router to a sw...
Hello, And thx a million for Your suggestion. I'm sorry to say, though, I need a bit more detailed instruction. I am a beginner :D . What I can do is the following :- I can isolate a port for example --> ETH7 Give this port a new address say -->192.168.2.2 I can setup the adsl modem to have address ...
I am really starting to want to throw this thing out of the window and burn it. Need to configure RB3011UiAS-RM so as to act as router with two ISP (1 adsl, 1 lte). Summarising :- What I have done 1. Kept default configuration defconf and changed 192.168.88.1 to 192.168.0.1. Router is acting as rout...