Thx again to all for the help, you helped me a lot to understand how vlans and ap´s work on a bridge.

I changed the mac address and i put the pvid back to 1, also frame type to admit all.. and it works :) so at the end it was the same mac address what was one of the problems i had. Here is maybe the final config of the ap, pls have a look on it if i have to change something else, if everything is ok...

Here the config of the AP /interface bridge add name=BridgeAP1-Port5 vlan-filtering=yes /interface vlan add interface=BridgeAP1-Port5 name=Wifi-VLAN_Guest vlan-id=10 add interface=BridgeAP1-Port5 name=Wifi-VLAN_Untrusted vlan-id=20 /interface wireless security-profiles set [ find default=yes ] suppl...

I got it, the vlan 20 on Untrusted_Wifi runs now. What i have done.. i deleted the virtual Radio from Wifi-Interfaces and from the Bridge Ports. Then i make a new Virtual Radio, make a new port on the bridge and there i change the PVID from 1 to 20 and the Frame Types to admit only VLAN tagged. The ...

1. Your Router config thus far looks great but you dont show your firewall rules!!! I have no rules yet, because i want to exclude the firewall of the problems i have, but the firewall questions will come later when the vlanconfig works :) 3. I would say you are missing ether1 (incoming trunk type ...

And here the AP config /interface bridge add name=BridgeAP1-Port5 vlan-filtering=yes /interface wireless set [ find default-name=wlan2 ] band=5ghz-a/n/ac disabled=no frequency=auto \ mode=ap-bridge name=RadioB1 ssid=Guest_Wifi vlan-id=10 vlan-mode=use-tag \ wireless-protocol=802.11 wps-mode=disabled...

Hello MKX, i changed the bridge vlan, but i have still the same problems with the AP Im very happy to see that someone cares about to make my config run, if we really get it to work i will make a own how-do thread with the config and a graphik, to help others who are also not so good in networks lik...

I changed the /interface bridge vlan like in the commend from mkx, but it makes no difference, i get no ip in the guestwifi and it disconnects me immediatly from the untrusted wifi

So i tested the configuration..A big thx to anav, but i have some question and i have problems to geht the wlan run The vlan configuration for the ports of the router works, the trusted ports get now a 192.168.0.x ip, untrusted a 192.168.20.0 and the ports 5 and 6 "where the Aps are connected&q...

Thx to all for your help, i will try the config from anav today, specially the wifi part looks very interesting and i hope i can make it to run.

I thought, i need a "default Network 192.168.0.1 / VLAN1" In my case i dont need this "default VLAN" Here is a drawing where you can see how the configuration should look like at the end. https://ibb.co/v42nVG5 In the meanwhile i configured the ports: wan ether 1, vlan10 ether 2-...

Hi Guys, i got a CCR1009-8G-1S-1S+ and two RBwAPG for free, so i decided to build a homenetwork. I have to say im not the specialist of networks and now im on a spot where i get stuck. Maybe i start what i have already done, what works.. Update to 6.43.4 On eth1 is the WANport, it gets a IP from the...