MikroTik

chrismal

If you search are present dozen of topics with dual wan failover, already working, without involving ChatSOP...

Thanks will look for it

chrismal

Translation error: why are you asking us? Already the first lines are full of bullshit , without checking the rest... […] /ip dns monitoring => not exist add address=8.8.8.8 disabled=no interval=10s probe-count=2 timeout=2s => not exist /ip route rule […] lookup-table=wan1_check => not exist […] lo...

chrismal

did anyone do it better are get it right?
Ask ChatGPT, what are you asking it to do here?
Go have a chat with the bot...

?

chrismal

I asked them both to create a config for dual WAN both using DHCP also use Google for monitoring WAN, did anyone do it better or get it right? ChatGPT /ip dhcp-client add interface=ether1 disabled=no /ip dhcp-client add interface=ether2 disabled=no /ip route add dst-address=0.0.0.0/0 gateway=ether1 ...

chrismal

RB4011, even though it's got 2 switch chips, can't be configured directly with switch chip menus. Instead one has to configure bridge ... on ROS v7.1 and later, bridge is offloaded to HW. So use this tutorial as inspiration. So far there's a bug, affecting HW offloaded VLAN traffic on RB4011: if a ...

chrismal

Hi I have a situation where I need to have 2 ports on separate networks but want a VlAN for each network that would go to the unifi AP as I want SSIDs for those networks, Example port 2 192.168.1.1/24 main lan with trunk port for vlans and unifi AP port 3 192.168.10.1/24 and a vlan that goes to the ...

chrismal

Hi there, is PPPOE client multi-threaded for v7 ?

Thanks

chrismal

You always did the speed test using multiple connections? RoS doesn't distribute the load of a single connection.

Yes I use multi

chrismal

I have RB4011 and it does not always spread the load on other cores, doing a speed test it sometimes uses multiple cores but it sometimes gets stuck on 1 core using 100 percent. Is this some kind of problem with the router? ISP is DHCP (IPOE) Thanks Use tool profile to see what processes are taking...

chrismal

I have RB4011 and it does not always spread the load on other cores, doing a speed test it sometimes uses multiple cores but it sometimes gets stuck on 1 core using 100 percent. Is this some kind of problem with the router? ISP is DHCP (IPOE)
Thanks

chrismal

I got GIG FTTH and they use PPPOE, I know that PPPOE is handled by 1 core but it's reaching 100 percent, is that an issue? also, if I enable a Simple Queue (SFQ as the upload is 60mbps and get bloat ) I still got near 900mbps, but what's puzzling me is that the same core remains at 100 percent with ...

chrismal

update.
The problem was the FS.com DAC, I got the XS+DA0001 DAC from Mikrotik and it works great.

chrismal

There were problems with using the SFP+ port on the 4011 with DAC cables in the past. The issue has been fixed in RouterOS, but we still use optical connections on 4011s and have no issues.

I would change to optical and see if the FCS errors continue.

Thanks for the suggestion, I will try that.

chrismal

scrap that, 1Rx FCS Error came up, its just 1 but still not good

chrismal

I cleaned the part that goes into the switch, not a great way to clean but I used a cotton cloth, will see if errors will show up, usually I get errors right away, but will see

chrismal

The problem looks to be solved by cleaning the DAC's SFP modules.

chrismal

Anything?

Thanks

chrismal

Hi, I got my switch uplinked via 10G DAC Active (DAC fs.com https://www.fs.com/de-en/products/74625 ... &id=147869 ) on the switch I keep getting these error Rx MAC Errors, Rx FCS Errors and Tx Pauses, switch firmware v 2.12.

Do SWOS have SFP+ bugs?

thanks,

regards

chrismal

*) fixed problem where switch locked up after a while and only small packets could be sent;

Thank you.

Chris

chrismal

Looks like we got the fix

) , V2.12

*) fixed problem where switch locked up after a while and only small packets could be sent

chrismal

@Paternot Adopting Unifi APs means you bind them to your controller and they automatically receive the wifi SSID and settings. @k6ccc Thank you for sharing, I disabled IPV6 on my routerboard as you suggested and tried re adopting my existing AP and did not get a hang, I have another batch to adopt s...

chrismal

@Nom
Thanks for sharing.
Its not just updating the Unifi gear that knocks the switch but Adopting, I can reproduce this nearly every time I adopt a unified device. Its a shame if this problem does not get fixed as I bought this switch to try out, really hoped to start using Mikrotik switches.

chrismal

For some strange reason, I can easily reproduce the problem by adopting and upgrading Unifi APs. Yesterday I had to adopt 6 to my controller and the switch hanged on almost all of them.

chrismal

Since I turned off IGMP snooping I have 23 days uptime, do not know if that was the problem, will see how it keeps going.

chrismal

Having the exact same problem.
I must reboot the switch every couple of days.
CSS326
SWOS v2.11

chrismal

Gentle nudge.
I need a new router, choice is 4011 or ER4, one has some features I need and the other has SQM. Please make my decision easier!

I have the same situation.
Another Vote for SQM

chrismal

Thank you.
You really helped.

Regards

Chris

chrismal

In ROS packets of single connections are handled by same CPU core. Which makes total sense as this way chances of out-of-order delivery are slim. In case of IPOE, every client connection (TCP or UDP) counts as single connection, meaning that multiple users browsing internet will have many open conn...

chrismal

Hi guys,

Is PPPOE wan single-threaded?

I am testing out a ISP FTTH but uses PPPOE and looks like 1 core gets much higher than the others, I also have another ISP that I was thinking of replacing that is IPOE this uses all cores .

Thanks for any info

chrismal

First Thanks to Mikrotik team for their great product. All I would like to say is Implementing a modern AQM would be really great for example fq_codel.

chrismal

Anyone pls?

chrismal

Hi. I created a hotspot with user manager and all works great. I created a limitation to limit each user to example 1mbps up and 10 down, that also works fine, I created a simple queue to limit the total bandwidth for the Guest vlan to example 50down and 5 up, so each user gets 10/1 but all users do...

chrismal

Thanks hope this will get fixed

chrismal

Thanks for your detailed and well explained reply. Is this a limitation with Mikrotik? as other routers I used always distributed among all cores even though speed test is a single connection Maybe other routers provide only multiple TCP connection count. Did you noticed differences between speedte...

chrismal

Thanks for your detailed and well explained reply.

Is this a limitation with Mikrotik? as other routers I used always distributed among all cores even though speed test is a single connection

chrismal

Hi Guys. First time Mikrotik user and I really like it, I have a HEX to play around and learn before buying the CCR version, I got everything working but I can't understand 1 thing, why is speedtest.net maxing out only 1 core but for example speed test in DSL reports uses all cores? so in speedtest....

Search found 36 matches

Re: ChatGPT and bing WAN Failover did anyone do it right?

Re: ChatGPT and bing WAN Failover did anyone do it right?

Re: ChatGPT and bing WAN Failover did anyone do it right?

ChatGPT and bing WAN Failover did anyone do it right?

Re: Help with port based vlan rb4011 pls [SOLVED]

Help with port based vlan rb4011 pls [SOLVED]

IS PPPOE Client multi threaded in v7?

Re: RB4011 sometimes maxes 1 core

Re: RB4011 sometimes maxes 1 core

RB4011 sometimes maxes 1 core

Could someone help explain this CPU Load please? GIG PPPOE

Re: css326 and rb4011 getting errors with 10G SFP+ uplink

Re: css326 and rb4011 getting errors with 10G SFP+ uplink

Re: css326 and rb4011 getting errors with 10G SFP+ uplink

Re: css326 and rb4011 getting errors with 10G SFP+ uplink

Re: css326 and rb4011 getting errors with 10G SFP+ uplink

Re: css326 and rb4011 getting errors with 10G SFP+ uplink

css326 and rb4011 getting errors with 10G SFP+ uplink

Re: SwOS version 2.12 released!

Re: CSS326-24G-2S+RM hangs until power cycle

Re: CSS326-24G-2S+RM hangs until power cycle

Re: CSS326-24G-2S+RM hangs until power cycle

Re: CSS326-24G-2S+RM hangs until power cycle

Re: CSS326-24G-2S+RM hangs until power cycle

Re: CSS326-24G-2S+RM hangs until power cycle

Re: fq_codel or cake in v7

Re: Is PPPOE wan single-threaded?

Re: Is PPPOE wan single-threaded?

Is PPPOE wan single-threaded?

Re: RouterOS v7.0beta1 (ARM)

Re: Hotspot user manager limit total bandwidth for interface

Hotspot user manager limit total bandwidth for interface

Re: speedtets using 1 core [SOLVED]

Re: speedtets using 1 core [SOLVED]

Re: speedtets using 1 core [SOLVED]

speedtets using 1 core [SOLVED]