Community discussions

MUM Europe 2020

Search found 13 matches

by yourboss
Tue Mar 26, 2019 8:08 pm
Forum: Beginner Basics
Topic: guest networtk
Replies: 18
Views: 1233

Re: guest networtk

It has no link, but the cable is plug in and I am sure that is working, if I plug in on another port is working. I'll take the router to the warranty, I have no other idea. Unfortunately I have suffered this after the system reset: "1) unplug the device from power 2) press and hold the button right ...
by yourboss
Tue Mar 26, 2019 6:35 pm
Forum: Beginner Basics
Topic: guest networtk
Replies: 18
Views: 1233

Re: guest networtk

Hello,

Today after a system reset I notice that eth2 has stop working. I check the cable on another port and is ok but when I plug in on eth2 is not working.
by yourboss
Mon Mar 25, 2019 10:26 pm
Forum: Beginner Basics
Topic: guest networtk
Replies: 18
Views: 1233

Re: guest networtk

I used "Router-Switch-AP (all in one)" as an example from https://forum.mikrotik.com/viewtopic.php?t=143620 But when I change interface from "/ip address add address=192.168.1.1/24 interface=BR1 network=192.168.1.0" to "/ip address add address=192.168.1.1/24 interface=BASE_VLAN network=192.168.1.0" ...
by yourboss
Mon Mar 25, 2019 8:47 pm
Forum: Beginner Basics
Topic: guest networtk
Replies: 18
Views: 1233

Re: guest networtk

Related to what i write in the above post, this is the default configuration
Image

And this is when I try to change the interface:
Image
by yourboss
Mon Mar 25, 2019 7:55 pm
Forum: Beginner Basics
Topic: guest networtk
Replies: 18
Views: 1233

Re: guest networtk

First of all I want to thank you for your patience and your time allocated to help me. I really appreciate, thank you! I am sure that I am really close to solve the problem but until then I have some issue. After I change interface from bridge_vlans to vlan10 and vlan20 I was left without internet o...
by yourboss
Sun Mar 24, 2019 8:28 pm
Forum: Beginner Basics
Topic: guest networtk
Replies: 18
Views: 1233

Re: guest networtk

Thank you for the clarification. Please take a look at the new export code and confirm me if I understand well what you told me. Firewall rules I will add them at the end when is working. if I do not ask too much, please tell me what I should choose on interface from address-pool=dhcp20. Vlan10 I wa...
by yourboss
Sun Mar 24, 2019 8:57 am
Forum: Beginner Basics
Topic: guest networtk
Replies: 18
Views: 1233

Re: guest networtk

On eth 3 I want to have the default network and guest network. Now I can only add only one network I don't know how to give access to both
by yourboss
Sat Mar 23, 2019 5:29 pm
Forum: Beginner Basics
Topic: guest networtk
Replies: 18
Views: 1233

Re: guest networtk

/ip firewall filter add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \ connection-state=established,related add action=accept chain=input comment=\ "defconf: accept established,related,untracked" connection-state=\ established,related,untracked add action=drop chain=input ...
by yourboss
Sat Mar 23, 2019 3:51 pm
Forum: Beginner Basics
Topic: guest networtk
Replies: 18
Views: 1233

guest networtk

Hello, I'm trying to configure a guest network on my home router (RB4011iGS+) but after I struggle few hours trying to figure out how can I do that I finally give up and search for help here. First I explain what I am trying to do: 192.168.1.1 is my default network for all the devices 192.168.2.1 is...
by yourboss
Fri Feb 22, 2019 10:46 pm
Forum: Beginner Basics
Topic: Firewall rules
Replies: 4
Views: 1021

Re: Firewall rules

I bought this router because I want to learn more about networking and about RouteOS. But there is a lot of information and I try to digest slowly. I've rebuilt the firewall rules, please tell me if they are better: /ip firewall filter add action=fasttrack-connection chain=forward comment="Fasstrack...
by yourboss
Fri Feb 22, 2019 6:09 pm
Forum: Beginner Basics
Topic: Firewall rules
Replies: 4
Views: 1021

Firewall rules

I am very new to networking, please help me to setup my home router. I use following firewall rules. /ip firewall filter add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \ connection-state=established,related add action=fasttrack-connection chain=forward comment="Fasstrack ...
by yourboss
Wed Feb 20, 2019 9:41 pm
Forum: Beginner Basics
Topic: Basic setup for home/home office. Firewall and nat rules.
Replies: 7
Views: 1362

Re: Basic setup for home/home office. Firewall and nat rules.

Can you do the same for the following code? please /ip firewall filter add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \ connection-state=established,related add action=fasttrack-connection chain=forward comment="Fasstrack DNS TCP" \ dst-port=53 protocol=tcp add action=fas...
by yourboss
Sun Dec 02, 2018 5:20 pm
Forum: Beginner Basics
Topic: optimal configuration
Replies: 0
Views: 444

optimal configuration

Recently I upgraded my old box router with RB4011iGS+. Because I'm new to Mikrotik ecosystem I would like to ask for advice. The router is for home-use with a lot of connections from different devices, most of them are used for Plex (Media Server) and web browsing. Please take a look at my configura...