Community discussions

Search found 7 matches

by macx979
Sun Dec 30, 2018 7:53 pm
Forum: Beginner Basics
Topic: RouterOS basic vlan config
Replies: 15
Views: 1244

Re: RouterOS basic vlan config

no worries. I don't have Windows pcs therefore Winbox is not an option. However I simply reset the CRS and started from scratch. Could also help me understanding the concept a little better. I followed all (hopefully all) your recommendations and did the following: set IP of MK to 192.168.2.60 via W...
by macx979
Sat Dec 29, 2018 8:29 pm
Forum: Beginner Basics
Topic: RouterOS basic vlan config
Replies: 15
Views: 1244

Re: RouterOS basic vlan config

I added: /ip address add address=192.168.2.60/24 interface=vlan2 network=192.168.2.0 and I removed: /ip address remove numbers=0 (this was the "interface=ether2") the last command unfortunately looked me out. Don't exactly understand why, since Port 17 was supposed to be an untagged access Port on V...
by macx979
Sat Dec 29, 2018 6:52 pm
Forum: Beginner Basics
Topic: RouterOS basic vlan config
Replies: 15
Views: 1244

Re: RouterOS basic vlan config

alright, You will need to create a VLAN interface under /interface vlan (this only has to be done for VLANs that you want to put an IP on), with interface=bridge and vlan-id=2 I did this and put the IP address on this VLAN interface How do I do this? Can't see an option to set a vlan for the MK IP. ...
by macx979
Sat Dec 29, 2018 1:17 am
Forum: Beginner Basics
Topic: RouterOS basic vlan config
Replies: 15
Views: 1244

Re: RouterOS basic vlan config

jan/03/1970 06:48:44 by RouterOS 6.41.3 # software id = xxx # # model = CRS326-24G-2S+ # serial number = xxx /interface bridge add admin-mac=CC:2D:E0:C7:00:DC auto-mac=no comment=defconf name=bridge \ vlan-filtering=yes /interface list add name=WAN add name=LAN /interface wireless security-profiles...
by macx979
Fri Dec 28, 2018 6:57 pm
Forum: Beginner Basics
Topic: RouterOS basic vlan config
Replies: 15
Views: 1244

Re: RouterOS basic vlan config

Hi again, I didn't have much time recently to keep on trying to set it up. But now I try again and still don't get it properly. second thing I did, was configuring one access port: /interface bridge vlan add bridge=bridge untagged=ether17 vlan-ids=2 so, Port 17 is an access port on vlan 2 untagged. ...
by macx979
Wed Dec 05, 2018 10:37 pm
Forum: Beginner Basics
Topic: RouterOS basic vlan config
Replies: 15
Views: 1244

Re: RouterOS basic vlan config

Hey, I followed this tutorial - https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#VLAN_Example_.231_.28Trunk_and_Access_Ports.29 I'd like to start with a trunk port to connect the CRS to the Linksys switch. I'll use port 4 on Linksys for that (settings are of Linksys shown in the picture above)...
by macx979
Tue Dec 04, 2018 10:50 pm
Forum: Beginner Basics
Topic: RouterOS basic vlan config
Replies: 15
Views: 1244

RouterOS basic vlan config

Hi, I recently purchased a CRS326 in order to replace my Linksys LGS308. Reason is, that I need more ports and furthermore I want to have all ports monitored via SFLOW for the management software I am using. Because of the latter I run routeros rather than swos. Basically besides VLANs and SFLOW the...