Hi, as far as i know, export gives you only config without users and passwords.

Hi,those settings are in in IP -> ipsec -> column profiles

in newer ROS versions those two are splited - peers and profiles, previously it was peer profiles (if i remember correctly)

just a side note - you have opened winbox to whole world? asking this because of those random logon attempts in logs.
maybe your ccr is beeing attacked/compromised

Updated my home Hap AC2 from long term 6.44.6 to 6.46 stable and ios devices keeps reassociating constantly on 5GHz and 2GHz Wifi. downgraded back to long term - 6.44.6 and WiFi again works great.

one thing you can do is to change default winbox port 8291 to something different in one of the routers
in that way you can add two routers with the same IP addreses

i tried this and it worked

i had the same problem but only with ios devices
tried allmost everything what i could find but in the end what helped for me was - installed 6.44.6 long term
not sure why but that fixed the problem and now reassociating happens once every few days

i would try to do something like this:
- create different DHCP server with no DNS
- create static lease for that pc and asign that DHCP witch does not have DNS to that lease

have not tested this, but in theory it could work

from comand line - /interface ethernet set yourport mac-address=xx:xx:xx:xx:xx:xx

this has been discussed a lot of times allready
look at this thread, it basically explains whoy you cannot put backup in other routerboard - viewtopic.php?f=2&t=153687&p=759104&hil ... up#p759104

Hi,
correct backup if you wan't to use it on another device should be used using - export not backup.
you should never put one device backup to another device

Updated my home Hap AC2 and 5Ghz WiFi works great :) before this used 6.45.6 stable and with that all my ios devices constantly after every 4 minutes got reassociating -> disconect -> connect.... with this update everything works just great, only time i see disconection is when ios device conects to...

just tested, everything works fine > /tool bandwidth-test 87.121.0.45 user=neterra password=net erra direction=both ;;; results can be limited by cpu, note that traffic generation/termination performance might not be representative of forwarding performance status: running duration: 2m57s tx-current...

Hello, I got a small 16gb flash drive for this. Format it as ext3 amd mount it. I keep packages, logs and backups on it. Be sure to copy them over to your PC from time to time as flash drives dont last very long. On another note, can you check if your 5GHz AC wifi gets stuck at detecting radar if i...

Hi,
after update all my export and backup files disapeared from files.
i'm using Hap AC2
is this beeing made by update so the devices with 16Mb memory could update normally?

why do you want to do backup restore from one mikrotik to another?
if you need it to have the same config then use export from old and import that in new one.

Hi ccardenas, yes, we have 3 bridges in RB4011 and in RB1100AHx4. hosts in RB4011 most of the time are - 30-40 in RB1100 not more than 5 connected directly, it is used as dude server for monitoring. one more thing to point that problem is in these RB4011 is that we have a lot of RB2011 with the same...

Hi everyone, since the last week of may, strange thing has happened to Router Boards which i manage. issue - Router simply bricks, what i mean by that is - you cannot connect to router in any way (stays on logging in and nothing more happens), APs that are connected lose all config from dude, SNMP s...