MikroTik

Reinis

Dual-boot of SwOS for CRS304-4XG-IN is in the works, but no ETA can be given

Reinis

Ok thanks. But please also explain if "short circuit" is an undesirable condition for the router, or if it can just be in that state forever without any risk of damage, overheating, etc. I understand that the name gives an idea, that something is wrong, but that is literally what it is. A...

Reinis

I had not, and now that I have upgraded it (from 7.15.3 to 7.16) the red warning indeed disappears. Thanks for the hint. What remains confusing is that in the log it says "ether5 detected poe-out status: wait_for_load" which is fine, but in the ethernet interface table it still says "...

Reinis

*) discovery - optimized LLDP information update; The change relates on how RouterOS updates LLDP information internally, not sending/receiving LLDP packets Librenms version 24.5.0-39 Event Log: discovery 192.168.0.2 LLDP discovery of GS2210 failed - Check name lookup I made changes to LLDP on my Z...

Reinis

Reinis, Here is part of an exchange I am having with their support. "From what I have seen, the PoE power draw on the XV2-21X AP can fluctuate (never spiking really high , just fluctuates) when the radio power is at or near max power and some PoE switches cannot handle that." The PD is ma...

Reinis

@Reinis With reference to Gokusj5okazu's post, the sum (for the 6 devices connected) of the mA's is 202+207+209+405+190+179=1392=1,392 A that, at 54V are 75,168 W, so very near to the default 76W cut-off, but if I get right he had issues with less than the listed 6 devices connected, so maybe there...

Reinis

Simple enough. I have a RB5009 PoE OUT version running several PoE devices. Input is 54V 3A via the DC jack. If I power 4 devices, everything is fine. If I force on the PoE to a 5th device, it hits overload despite only drawing between 50-60 Watts. If I force on 6, then the first 5 work fine. Force...

Reinis

Thanks for sharing your experience upgrading the AX3 to the new firmware. To be honest, I thought it was only me having these issues. I hope the Mikrotik dev team is following up on this feedback as sometimes I feel users report issues with the software but the Mikrotik team are living in their own...

Reinis

I don't understand what you (pe1chl and Paternot) are talking about. On devices with 16MB the update packages are already downloaded to some "internal" tmpfs on volatile memory. And you say, devices with e.g. 128MB flash memory do download the upgrade package to flash instead? You underst...

Reinis

Yes, it fixed, now the question is why on all my devices I have a loopback interface?

It was always there but hidden, now is exposed. Use cases for it are many and discussed plenty in previous page and in other topics

Reinis

*) poe-out - fixed powering devices if input voltage is lower than 12V for hEX PoE (introduced in v7.9); I've had this issue on hEX PoE Lite... is it also fixed? I don't know if it's version related No, hEX PoE Lite has different HW design with different PSE controller. But your device should be ab...

Reinis

Is there a correction for LLDP-MED ? In the beta it was missing Ieee 802.3 - MAC/PHY Configuration/Status.

Next beta (7.15) will have support for it

Reinis

At current time, can't give hopes about LLDP support in SwOS.

Tables turned quickly, we will be working on LLDP support for CSS610P-IN and that most likely will include other SwOS supported devices. Can't give any time-frame, but it will be coming.

Reinis

We have released a fix inside RouterOS 7.14beta10 regarding the issue and have got positive feedback. See https://forum.mikrotik.com/viewtopic.php?t=202612 *) poe-out - improved 802.3at classification and measurement accuracy; The fix will be ported to SwOS also as this was not board/OS specific iss...

Reinis

RB1100dx4de reboots after few seconds, no supout.rif created, no time needed to do this. Does not happen on default config of "RB1100AHx4 Dude Edition" with 7.13. Ensure that there is no netwatch or something else that is rebooting it. Try to generate supout.rif and send it to support@mik...

Reinis

yap99, pendie and kometchtech

7.12.1 Should work fine, sorry for the inconvenience caused.
*) ppc - fixed RouterOS bootup (introduced in v7.12);

Reinis

Thanks, but the port won't turn it on if I connect a device (hAP AC lite) to it, no matter how it's configured in the rOS 7.11 (auto on or forced on). I tried it more PSU like 24V 0,8A, 24V 1,5A, 12V 1,5A. Any other ideas? If setting poe-out=forced-on on PSE (RB450Gx4) does not turn voltage on B pa...

Reinis

I tested my hAP AC lite PoE out voltage again, and I measured same 9,6V when the port PoE settings is off or auto on (not attached PoE device) or the device is shutdowned. When I set this port forced on, then measured 24V. So I'm thinking it possible it's just a bug in rOS 7.11 or a bug in RB450Gx4...

Reinis

If you're looking just for a switch, check out https://mikrotik.com/product/css610_8p_2s_in with total poe-out power of 140W
Otherwise you could use https://mikrotik.com/product/rb5009upr_s_in with total poe-out power of 130W, but ROS support and more powerful CPU

Reinis

Starting from RouterOS version 7.9 limited manual fan-control options have been added for CRS3xx, CRS5xx and CCR2xxx devices.
https://help.mikrotik.com/docs/display/ ... troloption

Reinis

any info about "preboot-etherboot" and "preboot-etherboot-server" ?

https://help.mikrotik.com/docs/display/ ... tetherboot

Reinis

Urgent issue - LLDP-MED (auto voice VLAN for phones) is not functioning after upgrading from 7.7 to 7.8 on CRS328-24p EDIT: Turning on PoE LLDP seems to solve it, but it doesn't function if that is off per port (off is the default setting when upgrading). We're sorry for the caused inconvenience. T...

Reinis

Some outputs to the above:

Thank you for all the valuable input, we will check this more thoroughly and see if something can be done on our side.

Reinis

Even though the web portal shows that 54 volts (normal) are supplied, on the Cisco console and web portal it shows that only 15.4W are supplied, and therefore the AP does not power on the 5GHz CSS610P has 625mA * high_voltage, 1000mA * low_voltage limit per port, and a total power usage limit of 14...

Reinis

Most likely the issue is caused due to "station-roaming" being enabled on the station side. Please try disabling it and see if the issue still returns. We've set it as "disabled" by default now. It does not adjust anyone's configuration automatically in case someone intentionally...

Reinis

It does that to my Samsung S20, my Thinkpad P50, wife's iPhone XS, two Fire Sticks, and even tested her MacBook air. The damn thing seems to always want to be slow. I've tested it with them, sometimes one device at a time to be sure nothing else was slowing it. Speedtest.net and iperf3 tests are de...

Reinis

Also... they finally admitted there is "just nothing they can do about" busy airtime. So I stopped using their wireless radios. What do you mean by that? To improve stability in a high noise environment you can enable RTS/CTS. You can always fine-tune the wireless interface by adjusting h...

Reinis

I have a situation where I have a central WAP (INTL) and 2 HAP's (US) as bridges. They USED to use the 5Ghz band and after the upgrade it all BROKE. I correctly had frequency-mode set to regulatory-domain, but apparently Mikrotik removed countries from the definitions based on the hardware version ...

Reinis

On hap ac2, all moto z phones Do Not find 5ghz WiFi at 5220 Ce/ac. Downgrading 6.46.4 Or 6.45.8 solves it . No change or other setting changed. Devices are controlled using capsman. Hello, please contact support@mikrotik.com providing supout.rif generated from your CAPsMAN controller when the menti...

Reinis

5G stopped working at all on 4011 please contact support@mikrotik.com and provide supout.rif generated from your device after the "5G has stopped working" How to generate supout.rif can be found here: https://wiki.mikrotik.com/wiki/Manual:Support_Output_File Resolution: russia4 profile no...

Reinis

You will not ever be able to determine the cause of the reboot in the forum. If your router is rebooting by itself, then please contact support@mikrotik.com providing supout.rif file and any details on how to reproduce the issue. If there is a specific workaround, provide details about that too. Onl...

Reinis

MikroTik can you stop ignoring your customers and finally address the issue? I have never been so frustrated with one of your products or experienced such level of unprofessional behavior.. and I've been a long-time customer of yours.. As the issue is happening much later, there is no evidence that...

Reinis

Hi, I’m facing same issue, 5ghz Wi-Fi stucks on initializing. Wi-Fi Scan for 5ghz also doesn’t work so it seems that wifi module really doesn’t work. I have the same problem with 5Ghz SSID disappearing after some time / some days. What version are you using, as mentioned previously, the fix is only...

Reinis

We are researching ways how to implement MC-LAG

Reinis

What would you recommend me to do? Thanks in advance.

Please contact support@mikrotik.com providing few S/N and Software-ID's of the faulty devices

Reinis

I limited the service access to Winbox, made a new user, and using the device as a honeypot. I waited for 1,5 days, and bang... Suddenly the router cut the connection. When I tried to log back in, I was unable to do that with my new user. I tried the default admin,in without password. It was a succ...

Reinis

to deep regret faced the same problem. Made a report at the time of the crash. Sent to the above address. From Nirox. Thank you for contacting us. As I mentioned previously, the fix is only in 6.46beta59 and currently in no other branches. Please upgrade your device and see if the issue still appea...

Reinis

Yes, 6.46beta59 on RB4011iGS+5HacQ2HnD

We've not received any e-mail from you with the requested details. Please contact support@mikrotik.com

Reinis

Ooops! It did it again. Wifi 5ghz disappeared Please look above at the post that is marked as "Solved" for cases like this. Note, this only applies if the issue was experienced with 6.46beta59 or higher. If you still encounter SSID disappearance for 5GHz interface, reboot the device and d...

Reinis

@MikroTik: In the event that it's finally been fixed (wow, a whole year later) can we be privy as to what exactly was the problem and how it was fixed? The issue was with a buffer that was not clearing fully and caused the interface to "freeze". It also required very specific conditions a...

Reinis

contact support@mikrotik.com, provide software-id and your mikrotik.com username

Reinis

How were you configuring the device, if with WinBox, are you sure that WinBox was not running in safe-mode? Is this repeatable?

Reinis

Does V7 beta3 contain this fix?

No, it will be merged to v7 later on.

Reinis

Problem is fix in 6.44.6 or only beta? Currently only in 6.46beta59, but the fix will be added to the next long-term and stable releases Hello team. Thank you for update. 10h 5Gh work without falling, speed for local resources increase from 25-40Mb\s to 45-55Mb\s and it's more stable. But one quest...

Reinis

Is it necessary to update the Routerboard firmware as well or is this a software only fix?

No, it is not necessary. The fix is software level.

Reinis

Thanks everyone for the input, thanks to those who contacted support@mikrotik.com and provided detailed information, and a special thanks to @TimurA for helping us with the debugging. We've just released public beta with the potential fix (6.46beta59). The included fix not only improves 5GHz stabili...

Reinis

# model = RouterBOARD 962UiGS-5HacT2HnT # serial number = 673706C78CE1 /interface bridge add admin-mac=xx:xx:xx:xx:xx:xx auto-mac=no comment=defconf name=bridge /interface wireless set [ find default-name=wlan1 ] antenna-gain=3 band=2ghz-onlyg country=\ netherlands disabled=no distance=indoors freq...

Reinis

Interesting. Then why did normis say that you believe that you have fixed the issue and that we should wait for the next beta? And more interesting, why did he delete his post stating that?! We believe we have fixed the issue, but that particular fix has not yet been released. Wait for the next bet...

Reinis

For the problem to manifest you have to have no device connected to 5GHz wifi for a few hours. Then it "crashes". The title is a bit misleading. The interface doesn't get disabled, in that you don't see it disabled (greyed out) in winbox. It shows up/enabled fine in winbox/cli, but it doe...

Reinis

The title says it all: Validity End time/Till time ignoring time zone setting in customer and router setting. Please fix this bug. In the meantime, I work around this issue by adding 7h (I'm GMT +7) in the validity field . Please fix this bug, thanks in advance. Hello, please send an e-mail to supp...

Reinis

This was clear from your first answer. But still we would like to see support. There are many situations where miracles begin because of this. And in the end, the customer does not choose your equipment - and we have nothing to argue. We understand the request and of course, if possible, we would s...

Reinis

1. Here - that's what I’m talking about. Mikrotik does not broadcast the region. I've already provided the current situation ON the matter: "Currently MikroTik has no plans of implementing 802.11d" This is not an Apple issue. This is a problem for router manufacturers. Asus everything wor...

Reinis

I cannot find a reference for this. Where to find? Modern (by modern I mean few years old phones/devices) mostly do not really on the protocol but use other means to know it's geo-location. We can always cherry pick "special" manufacturers/devices that simply use restrictions by their pro...

Reinis

Thank you for informing us about your concerns regarding the issue. Currently MikroTik has no plans of implementing 802.11d as it's already not allowed to rely solely on 802.11d for setting country-specific radio parameters in USA since 2015, thus most of the phone, laptop etc. manufacturers most li...

Reinis

I am looking to hire someone for this basic setup and ongoing support.

We have a special list of MikroTik certified consultants, that are waiting for such requests: https://mikrotik.com/consultants

Reinis

one question regarding this topic. So as soon as VLAN filtering is enabled traffic will go through CPU? i mean if i want to get ether and wlan i have to tick VLAN Filtering in my case i have 3 routerOS, and the thing is i need to run VLAN on ether and wlan. So acording that traffic will go through ...

Reinis

Hello all, The problem is, our two weeks of free support are now finished and we still have a lot of questions but didn't even get our first answer. Does anybody know how else they can be reached? The "free support" you are mentioning is regarding initial configuration (first time connect...

Reinis

After a year of work, my HAP AC2 failed. Bought to replace RB4011. And in this device, for 3 days of operation, WiFi turned off 2 times. Does everyone have a problem or replace the device in the store? Please write to support@mikrotik.com, providing supout.rif from your device generated after the c...

Reinis

Is there an external tool that help in script writing? When I use directly winbox I don't have any debug method. I must insert some log output to check for example variables content. If there is a syntax error the script doesn't run but I don't know where is the problem. Thanks in advance For debug...

Reinis

Hey, So I have an Intel 9260 card and tried the mentioned config by disabling 2 out of 4 chains and mentioned Channel configs of eeeeeeeC and 5320MHz and was finally able to achieve the 160MHz connection. However, upon authenticating with the AP i get 1.7 Gbps link speed, but after a few seconds it...

Reinis

160MHz does not work in the US, presumably because Mikrotik did not complete the necessary testing required. Sorry, but we are still in the process of certifying for US (U-NII-2), that's why you cannot choose any frequencies with the 160MHz configuration when country is set to united-states-3. Does...

Reinis

I tried setting frequency=5180 , channel-width=20/40/80mhz-Ceee , and secondary-channel=auto and get an error ;;; no supported channel and secondary channel combination You have to set country and regulatory settings which will allow such configuration. Notably, setting my frequency and channel wid...

Reinis

I have similar issue. Today MT support refuse license update after NAND replacement for RB493G. As well doesn't offer paid repair. Think twice before buying MT, one day you will be left behind... 1) Manual repairs are not supported (maybe you've seen "warranty void" stickers on nearly all...

Reinis

What is the current status of wave 2 features in Mikrotik wireless drivers?

Most of the features are implemented, but MU-MIMO is WIP

Nothing changed

Any validity of the statement?

Reinis

I'm a bit confused, but why doesn't the US model of the RB4011 w/ WiFi support 160MHz channels? Sorry, but we are still in the process of certifying for US (U-NII-2), that's why you cannot choose any frequencies with the 160MHz configuration when country is set to united-states-3. Regarding 80MHz+8...

Reinis

Thank you both for the confirmation and the additional info. I will utilize this knowledge when the fix is available. My sincerest apologies if you feel I was too abrasive with my replies. A fix regarding 5170-5330MHz 160MHz has been made and will be released in the next beta (current is 6.46beta6,...

Reinis

Hi, i have upgraded my two RB750 to v6.45.1 and they are not let me access through api, and my 6.43.8, 6.44.3 is connecting to api normally, i'm using default port and i'm accessing in php. Before upgrading i can connect both tiks with api. Thanks https://wiki.mikrotik.com/wiki/Manual:API#Initial_l...

Reinis

There appears to be some confusion still. Let me clarify once more that I know that in RouterOS we don't set them via the numerical/traditional way. I know how to match the channels to frequencies because that information is readily available. I am only referring to them via numerals because it's e...

Reinis

What I don't get is where you're seeing channels 36, 40, 64 and so forth, when configuring for 160MHz. In RouterOS, you don't specify the channel, but rather the frequency. So for example, to get channel 36, you set Frequency 5180 (channel-width=20/40/80/160mhz-Ceeeeeee) When 160MHz is selected the...

Reinis

!) security - fixed vulnerabilities CVE-2018-1157, CVE-2018-1158;
Fixed again?

Both CVE's were fixed in the previous versions, but they could be reproduced differently if you had access to the www service and user account with "full" rights. We have removed this possibility as well.

Reinis

Hi, I'm trying to make a script that runs only if the time is between for example from 18:00:00pm to 04:00:00am hs. So far I've got this one working: :if ([/system clock get time] > "18:00:00") do={} This one will run if time is past 18:00:00, but what I need now is to "tell" th...

Reinis

This isn't a question, it's a warning. There is a bug of long standing in RouterOS that causes invisible, internal queue corruption. I have experienced it with both tree queues and simple queues, over a period of something like eight years, and have incontrovertibly proved it is happening. Have you...

Reinis

Could you please provide your ticket number?

Reinis

I'm glad I am not the only one to discover the extra 00 in the coordinates bug when coordinates format is set to dd The issue has been fixed with the additional "\00" values at the end of the output and will be released on all three branches with the next releases. There are two extra 0s ...

Reinis

I just had the same problem with my RB4011 (w/o wifi)! Rebooted by itself! 6.44.1 It make me think to return on my old but stable RB1200 :( Hello, please send supout.rif of your device to support@mikrotik.com and provide any details if you have related to the reboot. https://wiki.mikrotik.com/wiki/...

Reinis

Since 2 days (9 April) all our mikrotik devices with 64Mb RAM are rebooting continuously after 1 minute and 40-50 seconds. IPv6 package was already disabled since long time. RouterOS versions are not latest but we have very strong security rules. Is this the same DDoS issue? We are not able to rebo...

Reinis

Hi please i need help here, i recently accuired an RB450gx2 router, upgraded it to 6.44 OS. i already did the basic config as to hotspot, dns and all, infact it connects to the internet already. i discovered that usermanager is not even on the packages i just installed, please how do i resolve this...

Reinis

~snip

Please write an e-mail to support@mikrotik.com, providing detailed information of your network topology, what you are trying to achieve and where you see the issue.
Additionally, provide Supout.rif file from your MikroTik device: https://wiki.mikrotik.com/wiki/Manual:S ... utput_File

Reinis

I think new mobile app solved that issues.
Yes works in mobile app too without any updates (to the app). Works in WebFig as well.

It must have been the server.

Correct, the issue was on our side and is now fixed. No updates on the client side are required.

Reinis

i forgot my password
so i try to reset it with reset button
but it does not work
what can i do

If you still can't reset your device using information from our WiKi: https://wiki.mikrotik.com/wiki/Manual:Reset
Please try to Netinstall the device: https://wiki.mikrotik.com/wiki/Manual:Netinstall

Reinis

Hi Guys i have hap lite rb941-2nD-TC that no detect lan port in winbox (ip and mac). i programed than with netinstall for several times . even though received install complete massage the problem wasn't solved. please guide me. 1) Try to add manual IPv4 configuration to your host device and see if ...

Reinis

Please use the Netinstall utility to reinstall the device: https://wiki.mikrotik.com/wiki/Manual:Netinstall Make sure to enable the checkbox "Apply default config" If it still fails, please attach console cable to the back of your device and log the output of the device during the boot Set...

Reinis

Lasts like 2 days before crashing, fix First of all, you should create a ticket with support by writing an e-mail to support@mikrotik.com describing the issue, how to repeat the problem and providing Supout.rif file from the device. Without the Supout file, it can only be a guess as pcunite said. B...

Reinis

Hi I wonder what is the difference of cAP lite https://mikrotik.com/product/RBcAPL-2nD-307 vs cAP https://mikrotik.com/product/RBcAP2nD . Both are 2.4Ghz only, have same CPU und same size RAM. While on paper they look pretty similar, disassembly would show otherwise. Both of them use a completely d...

Reinis

BUG in 6.44 Stable
We use these individual packages and get this error on install
09:00:29 system,error can not install security-6.44: dhcp-6.44 is not installed, but is required

It's not a bug, please read the changelog for 6.44:
*) upgrade - made security package depend on DHCP package;

Reinis

Please contact MikroTik support at support@mikrotik.com providing Supout file of your device.

Reinis

Please use English only when posting on our Forum.

Reinis

Hi I have a Mikrotik RB951Ui-2HnD with this configuration Configuracion.PNG Ether 1 is WAN Ether 2 is LAN Mikrotik have an internet connection but LAN doesn't have. What can i do First of all, update your device to at least the latest stable version. Currently, it's 6.43.12. Without all current con...

Reinis

Hello. I have one internet provider in wifi network. I made drop rules for udp port, but rules working only for one laptop. How can i share rules for another laptop in the same wifi network ? Please provide the firewall rule you have added and a small diagram of your network. Also, please elaborate...

Reinis

Please be aware that not all issues can be with the same root cause.
Have you tried to update the device to the latest version of testing branch - 6.44rc1
If you still encounter any issues after the update, please open a ticket with support@mikrotik.com

Reinis

mAP lite in endless loop boot Please use the Netinstall utility to reinstall the device: https://wiki.mikrotik.com/wiki/Manual:Netinstall Please try to follow these steps to load the backup bootloader: 1) Power your device off; 2) Press and hold reset button; 3) Power device on; 4) Hold reset butto...

Reinis

I ran into similar issues on a 2018 ipad pro, but it seems that 6.44beta75 resolves the issue. Need to run some more thorough tests (on hAP ac) to evaluate stability and performance - It looks like the fix may be included in the latest beta relaease: 6.44beta75 (2019-Feb-08 08:02). I have not test ...

Reinis

On 5GHz after the upgrade, I have had occasional connectivity issues. Not with all destinations though, mainly with Apple ones (app store for instance). It might have something with IPv6 being also configured on the devices. If I encounter this again, I will troubleshoot it further. If the Apple pr...

Reinis

The value of string has to be inside quotation marks and add "\" before the special symbol, like

interface wireless set nv2-preshared-key="\?testkey"

If you have problems with other symbols, check https://wiki.mikrotik.com/wiki/Manual:S ... _Sequences

Reinis

Have you tried connecting the RB4011 and your PC with a switch in between and then performing Netinstall?

Reinis

I have opened a ticket to support since 25/12/2018 and the last response from their side was on 8/1/2019

Could you please provide your ticket number?

Reinis

When i try to access to the Router Config by the IP in the browser, appear "Connection Refused" in the screen, how do i enter to the config? Possible that your browser does not allow un-secured SSL connections. You should be able to bypass it by clicking More -> Continue Anyway. I would r...

Reinis

Thanks to everyone for their input. The issue has been found and fixed, sorry for such a long time needed to fix the issue. It should be released in the next public beta version.

Reinis

anyone have a simple way to switch my wan interface to port 5 on a hap ac lite version 6.43.8? new interface list is confusing me as I'm just learning this OS. It depends on whether other end of your ether5 will have dhcp-server on it. If yes, then: /ip dhcp-client add interface=ether5 // To add th...

Reinis

Using the command line, I can add a DNS server using: ip dns set servers 8.8.8.8 Is there any way to remove all of the DNS servers (leaving only the Dynamic Servers) using the command line? The only command I have found allows me to replace the DNS servers with a new list of DNS servers, but it doe...

Reinis

Hi! Sorry for noob question - i before do not use Mikrotik. I want buy hAP lite and i need guest SSID. Does guest SSID is support in hAP lite or this features already is in RouterOS in each AP Mikrotik? If AP is in Home AP mode then from Quick Set tab you can create Guest Wireless Network. But you ...

Search found 101 matches