MikroTik

enlace101

I have a strange feeling about this device. It has been on my test bench for months, with all tests yielding unsatisfactory results for a WISP environment. The first disappointment was the lack of compatibility between the wireless package and the wifiwave2 package (bridges and station bridge). The ...

enlace101

that's exactly what's happening with two LHG XL AC devices; however, they are no longer called XL.

enlace101

Here’s the translated message in English: I have an LHG 5 AC antenna that experiences intermittent issues. The only way to make it respond is by disconnecting the PoE and restarting it, after which it works for a few days. I’ve noticed a warning about the CPU frequency, but when I try to set it to a...

enlace101

Interesting, I still don't know of any success stories using the L11UG in WISP or long-distance environments. Could someone shed some light on this topic and help us configure it to replace our old AC access points?

enlace101

802.11 CSMA/CA or NV2/TDMA are like round-about and traffic lights in car traffic. Which one gives better throughput? It depends how the traffic distribution and intensity is. With traffic lights (not the real smart implementations) you always have some chance on fixed wait time, not the case with ...

enlace101

In AP..
RTS/CTS
CTS to self
?

enlace101

I came to the forum looking for a solution... but I discovered that with a more powerful router it works correctly. I have tried with hap ac Lite and it does not go over 16mbps 20 at best and later an hAP AC2 and I have no losses Navigating some pages failed (mainly banks), set it to 1542 and they n...

enlace101

I just read in another post that if you connect an old controller with a new one, you have to use a pseudobridge (what a shame). I will try this solution. A second solution would be to send the EOIP tunnel through the connection without including a wireless interface on the bridge. But I don't know ...

enlace101

When replacing the AP Wisp, I have issues. It AP connects with 3 clients. One client connects normally, the other two clients don't connect. The client that connects normally is in standard CPE Station mode. The two that don't connect are in Bridge Station mode, and in this bridge, there are EOIP co...

enlace101

This access point does not support MikroTik AC clients in Station Bridge mode; it only allows pseudo-bridge, which is not useful

Some help on how to use it with a bridge?

enlace101

https://mikrotik.com/product/l11ug_5haxd

Finally, we have solutions in AP; we only need the clients now.

enlace101

https://mikrotik.com/product/l11ug_5haxd

Finally, we have solutions in AP; we only need the clients now.

enlace101

it is dead and replaced by another one... I understand that you will suffer the same problem @enlace101 Hello Can you tell in more detail what happened (where and how the water got in) Possibly disassembly photos I will be very grateful to you Thank you correct installation. the only special thing ...

enlace101

Ye. We’ve lost a bunch due to rain as well. 90’ is fine but pointing up in hard rain. They’re toast

in the manuals it does not indicate that.

it is dead and replaced by another one... I understand that you will suffer the same problem

enlace101

20230828_192530.jpg

enlace101

It has happened... the curious thing is that it was not pointed downwards, rather with an angle of 45 upwards. this worries me for all installed products.

enlace101

please help, any capsman bible for beginners?. I see that it will be necessary for future ax devices, wifiwafe2 is similar in configuration. For testing, I need to be able to configure capsman to deliver the maximum power available to the devices. It is in a controlled environment in the workshop. T...

enlace101

+1
very interested in this post

enlace101

We need to move forward with our wisp clients. We already have enough ram in RBM11G (256Mb) Enough to install Wave2 We need a replacement to R11e-5HacD How hard is it to create such a card with an AX controller? It would be the perfect combination... TwistPortTM Adapter for RouterBOARD RBC https://r...

enlace101

Sekect mode
Wifi b/g/n
Y wifi a/n/ac

enlace101

How is the 5GHz backup failover implemented ?
I mean what triggers the switch on the 5 GHz in terms of configuration ? Any type of bonding etc. ?

New interface bonding, diferent modes

enlace101

If you want to ensure 10Mbps to connections with a specific port. it's possible. I do this in the following way -First, I would mark the connection and packets defining the port and the rest (Mangle) -Second would generate Queue Type PCQ Down and UP -Third, it would generate a queue tree with the pr...

enlace101

550mbps audience speed wave2

enlace101

viewtopic.php?p=908468#p908468

enlace101

I understand that it may be considered inappropriate to search this forum for a replacement for mikrotik products. I think it is easier for those who know the device (hap AC3) to recommend a replacement with poe OUT that better fulfills the Wi-Fi functions of a Home. Our ISP gives us internet throug...

enlace101

No mikrotik, wifi is slow

enlace101

do you know any poe out router to replace mikrotik hap ac3? (Wisp)

Need bridge Mode..
Thanks

enlace101

I recommend using Band 2Ghz-G/N to lower the channel width to 20mhz try channels 2412, 2437, 2472 and choose the one that works best. If you still don't get decent results, and in very rare cases, use superchannel for extra power (Bad habits, sorry). It is a very basic router and it will be very dif...

enlace101

Sorry for ruining your reading of the forum. Because of your condescension I think I can guess what brand you are a user of.

enlace101

Why nv2?

enlace101

you would have to use a simple 5-port mikrotik switch maybe 192.168.0.13/24 The best thing that has worked for me is bonding /interface bonding add mode=active-backup name=bonding1 primary=ether1 slaves=ether1,ether2 probably some expert can recommend bridging protocols STP and priorities /interface...

enlace101

In audience
7.1 Capsman
7.1 No Capsman
7.1 wave2

enlace101

What benefits have been found? RuterOS 7.1 access points for a wisp environment
(wifiwave2)
APs:
netmetal
mANTBox 19s
RBM11G

thanks for responding with your experiences

translated with google

enlace101

Thank you. I'll try it tomorrow

enlace101

Powerbox is a POE Switch only. No wifi

enlace101

I am happy with mikrotik wireless products.
I understand that there are better products. but the value for money plus benefits is good

Speed is good
Price better
Ac2

Capsman work

enlace101

Error. Router 2 is 192.168.1.2
Sorry

enlace101

Netflix also fails

enlace101

Hello, I need your help ... I have 3 routers. Router 1 connects to ISP (provider router) WAN Dynamic IP public LAN 192.168.1.1/24 DHCP DMZ (192.168.1.2) Router 2 Mikrotik hAP (default conf) Fixed WAN 192.168.2.1/24 LAN 192.168.99.1/24 DHCP DNS 1.1.1.1 8.8.8.8 Router 3 Mikrotik hAP (default conf) Fix...

enlace101

the temperature of the power supply rises considerably

enlace101

I have many devices with faulty 24v 800mA power supply.
hAP ac lite
hAP ac2
approximately 12 devices.
the power supply fails before 1 year of use.
some have a protective UPS
Does anyone else have this problem?
Mikrotik is aware of this bug?
Excuse my english

enlace101

Ap /interface bridge add admin-mac=11:11:11:11:11:11 auto-mac=no comment=defconf name=bridge /interface wireless set [ find default-name=wlan1 ] band=5ghz-a/n/ac channel-width=\ 20/40/80mhz-XXXX disabled=no frequency=auto installation=outdoor mode=\ bridge ssid=MikroTik5G /interface w60g set [ find ...

enlace101

Thanks

enlace101

viewtopic.php?f=9&t=170983

enlace101

viewtopic.php?f=9&t=170983

enlace101

We need to implement this solution in all our nodes to release load on the NV2 APs.

Any news about this problem?

thanks

Sorry Google translate

enlace101

I don't have that device. I am interested in knowing how they solve the automatic backup 5ghz

enlace101

I would like to know if it is possible to download the default scripts for mikrotik products. In my case, I have learned a lot by reviewing the default configuration recommended by mikrotik. I am especially interested in the configuration of the CubeG 5ac pack. I would like to know how they optimall...

enlace101

Catalunya https://mikrotik.com/product/m11g https://mikrotik.com/product/R11e-5HacD https://rfelements.com/products/wireless-broadband/symmetrical-horn-gen2/symmetrical-horn-tp-antenna-2#30-symmetrical-beam-antenna-hg3-tp-s30 https://rfelements.com/products/wireless-broadband/twistport-adaptor-for-r...

enlace101

how can I adjust the gain of anrtena in routerOS 6.47.x? Winbox
regulatory domain error

enlace101

my experience... -new cat6 cables -new cat6 connectors -new poe switch (previously PowerBoxPRO, now netPower 16P with dual power) -Different ports -Different Rocket M2 (new) -Autonegotiation disabled / enabled -Fixed to 100HalfDuplex -Now in automatic -Same problem... Aug / 22/2020 19:50:05 interfac...

enlace101

What is the opinion of using a bequant server?
I am testing it now.
the quality increases considerably.
I am afraid it is a false effect.
take a look and tell me if it really works
thank you

enlace101

Hello Thanks for reading and answering. I have tested with 40Mhz, the speed only increases a few megabytes. even, the upload speed decreases. CCQ percentage is also affected although the log table reaches really high values. I do not understand why I do not reach the limit of 100Mbps. Thank you ver...

enlace101

Auto is the CPE

I keep getting similar values in speed test ....
Should I reduce the power of the AP?
What is the best option to reduce it?
The CPE have too much power?
Thanks for your time

enlace101

Hello Thanks for reading and answering. I have tested with 40Mhz, the speed only increases a few megabytes. even, the upload speed decreases. CCQ percentage is also affected although the log table reaches really high values. I do not understand why I do not reach the limit of 100Mbps. Thank you very...

enlace101

Hi. I need help finding the problem in my configuration. I have tried different settings (40Mhz, 20Mhz, different channels, NV2, 802.11, Fixed data rates). I can not exceed 80 / 40Mbps Client has DinaDish AC I have seen users with Wisp (TomjNorthIdaho) in the forum offering 100Mbps plans. I have rea...

enlace101

The problem with "no country" is that CPE do not scan all frequencies in auto mode.
Google translator sorry

Search found 57 matches