Hello, We are running RouterOS 6.41 on a CCR1036-8G-2S+ and we are having problem with high latency when we ping the router. This is what we are seeing when I ping from a host that is 1 hop away from the CCR, PING 192.168.11.1 (192.168.11.1) 56(84) bytes of data. 64 bytes from 192.168.11.1: icmp_se...

Mikrotik Model : 1100AHx2 Current Firmware : 6.45.9 PPOE Client 173 Sometimes , some client disconnected max 15-20 sec later autoreconnet. Client Router Recall time 30 sec. Client dont cut connection, but ppoe connection terminated 13 sec 25 sec later reconnect. Users telling me , we connection som...

It got solved i guess, I changed MTU and MRU to 1504 (1464 i was actually able to ping without fragmenting the packet + 40 of Packet header) MRRU I set to 1580 (I don't know how to calculate this but i read somewhere on the internet so set this) I changed above values for 1) pppoe sever 2) All my A...

i have CCR1036-8G-2S+ .I have problems with losing connection with different users every day. Mikrotik's error is as follows Ppoe connection established from MAC ADresss ppoe disconnecting ppoe connecting. diffrenet time problem have peer is not responding. every day this problem every time my mikr...

1.routing table need to go back as in ros6....having problem with load balancing PCC & Failover 2.speed test 150mbps become 75mbps in 7.1.1 & 7.2rc1 3.pppoe clients not working low speed & peer not responding 4.A lot more bugs in the software it have a rebooting problem Conclusion i hav...

1.routing table need to go back as in ros6....having problem with load balancing PCC & Failover 2.speed test 150mbps become 75mbps in 7.1.1 & 7.2rc1 3.pppoe clients not working low speed & peer not responding 4.A lot more bugs in the software it have a rebooting problem Conclusion i have...

same problem it look like a mikrotik problem...(i try cisco with no problem) 1100ahx4 with 100 session random disconnecting & reconneecting happening

Hi i am having issue on my wireless network, All th CPE disconnects time and again when i check the log on my routerboard it says terminating...peer is not responding this problem is not only one some devices its on almost all devices! i am using mantbox 19s as ap and CPE are mix of LHG5 and UBNT l...

I am having the same problems could you give a example of how you use src-nat as target instead of masquerade...example like for the pppoe pool address & wan address in ip-firewall-nat those are what i use masquerade to do.my example: /ip firewall nat add action=masquerade chain=srcnat comment=&...

LCP missed echo reply.....could someone tell me how to fix this problem
PPPoE: Peer is not responding-users getting disconnected & reconnected randomly

I am getting a similar issues with pptp remote laptop (authenticated to Windows Server 2008) but no problem with a MT router. echo: pptp,ppp,debug <cl.ie.ent.ip>: LCP missed echo reply echo: pptp,ppp,debug,packet <cl.ie.ent.ip>: sent LCP EchoReq id=0x4 echo: pptp,ppp,debug,packet <magic 0x17f25004>...

mikrotik does not have correct answer for this reason i am searching this solutions since a year now,, but still there is no solutions. I have been looking for a answer for peer not responding for 2yrs now,this really needed a fix from mikrotik i am using 1100AHx4 dude edition These are the error i...