MikroTik

omarraza

You can check some options to improve the CCQ: 1) use a strong frequency that has less noise (High value of Noise to the floor) 2) Change channel width for example Ceee and eeeC ( or Ce and eC etc). be informed that, any options from the Channel Width have an effect on CCQ for example use 10MHZ as c...

omarraza

maybe interference was occur if you want to know which frequency is good for you choose the highest one for example -100 is very good than -90 an so on.

omarraza

thanks.

omarraza

Hello Guys, I have a question, I want to setup Point to Point (PTP) connection between LHG5(24.5dBi ) and SXT 5HnD(16dBi), but I don't know which is very good I should choose as access point and which one as receiver to get high performance throughput? my distance is between those two points is 1.5 ...

omarraza

please help.

omarraza

Hi folks. I tried to create a point to point connection between SXT5 as Sender (AP) and LHG5 as the receiver , I configured the AP as Bridge and the Receiver as Router , I added a scheduler to shutdown SXT5 and LHG every day on a specific time . I want to configure the date and time correctly I put ...

omarraza

Thanks @bpwl, it was useful.

omarraza

Hello folks. I tried to get internet from my neighbors' router through a cable to my house's router then I share the internet to my shop by using PTP as shown in the below image, I set my SXT6 as an Access Point(AP) and LHG 6 as a receiver(station), to the AP I sets Static IP address and to the rece...

omarraza

@bpwl Thanks.

omarraza

Hello, I tried to create PTP which SXT 5HPnD as a bridge and LHG5 as station bridge, Tx Signal is is good which it's value is -66 but the Rx Signal value is -72 which it's not good and also Tx/Rx CCQ is 90/45, the Question is here why Rx is very poor does it's about the Antenna gain dBi because the ...

omarraza

we have two houses which we use the same internet. from another house he uses Mikrotik router to share the internet by 2.4GHZ, I can connect the Mikrotik router by using PC, Mobile, Tablet without any problem but I want to connect it through my TP-Link router through survey ( WDS bridge ) search, I ...

omarraza

@gazingbazooka
Model No. TL-WR940N/TL-WR941ND

omarraza

we have two houses which we use the same internet. from another house he uses Mikrotik router to share the internet by 2.4GHZ, I can connect the Mikrotik router by using PC, Mobile, Tablet without any problem but I want to connect it through my TP-Link router through survey search, I can input their...

omarraza

please help.......?

omarraza

Many thanks for yours.

omarraza

The same principle holds for all of shown numbers: the larger the better. Note that some values are negative (e.g. Signal Strength) ... for example -59 dBm is larger than -73 dBm. Thanks, from your post for example signal to noise the value of it if the high value, for example, 70db is very good th...

omarraza

What devices you Are using?
Only one chain?

AP (Mikrotik SXT5) and receiver Nanostation5.

omarraza

Hello... I tried to set up Point to Point(PTP) between two device, I can't understand which signal is good from below picture I selected which is inside the box I mean ( Signal to Noise and CCQ ), Now signal to noise is 62db and CCQ 80-90 but when I turn the AP to another direction the "signal ...

omarraza

do have any solution?

omarraza

@mkx Thank you,
but from Nanostation when I choose 40Mhz and country set to the USA only just two Channels available 5760 and 5800.

omarraza

Hello, I use Point to Point between a Mikrotik (sxt 5hpnd) as Transmitter and Ubiquiti (Nanostation5) as Receiver, From the Mikrotik AP I use 20/40mhz eC, Ce and use a frequency like 5800(which exist on Nanostation frequency list) and then change the country to USA or Australia but, from Nanostation...

omarraza

Thanks.......

omarraza

the secret tab doesn't contain any thing

and active user tab the information are :

omarraza

Hello, I Have a Mikrotik router (mipsbe), contains the information about the users which it connected to the access point, from PPP the pieces of information have existed like username, TX, RX, MTU, FP TX.... but It's doesn't show the password of users besides the user information. https://i.ibb.co/...

omarraza

according
black color has least noise (it's perfect)
then blue
then green
then yellow
then red.

if black color appears on the picture you can choose this frequency because it's very good and it has the fewest noise, if it doesn't appear you can choose blue color and so on...

omarraza

this is my station throughput speed!

omarraza

use spectral history to choose the best frequency channel which has the fewest Noise.

omarraza

Many thanks.

omarraza

Hello.
I have created point to point. For access point device it say which frequency you use.
My distance between AP and station nearly 350meter which is correct I choose
20Mhz OR 20/40Mhz below OR 20/40mhz above.

Please help me?.

omarraza

download a simple file it's througput speed is 1.9MB from the destination, but if i download the same file from the source the result near 4.5MB !!?
which I have a very good signal.!

omarraza

I did it, but the result is the same 14Mbps!
Please help.

omarraza

please help.

omarraza

Hello, I have one mikrotik sxt5 5HPnDr2 as AP from Home with a nanosation5 at the shop, I shared home internet via the Mikrotik to shop using PTP. at Home when I test the internet the speed is 35Mbps , ping is 18 but at the shop when I test the Internet maximum speed is 14Mbps ping is 18 which shop'...

omarraza

Hello, I Have a Mikrotik device and i Configured to Acess point, mobile devices and PCs can connect to it and use the internet perfectly, but I have a problem here I want to connect my tplink router with the Mikrotik Acess Point by WDS bridging, where on tplink router I search for this Acess Point m...

Search found 34 matches

Re: signal strong bu CCQ low

Re: Reduced noise floor

Re: which is good for access point (AP) LHG5 or SXT 5HnD ?

which is good for access point (AP) LHG5 or SXT 5HnD ?

Re: update date and time automatically on SXT5 Hpnd

update date and time automatically on SXT5 Hpnd

Re: Hide bridge's AP IP from a neighbor tab in winbox!

Hide bridge's AP IP from a neighbor tab in winbox!

Re: Tx Signal is poor, but Rx Signal is good

Tx Signal is poor, but Rx Signal is good

connect to Mikrotik router through TP-Link router (WDS)

Re: cannot connect to mikrotik router through tplink router

cannot connect to mikrotik router through tplink router

Re: Mikrotik AP using 40Mhz but not find on the AP on the Ubiquiti station?

Re: which of this has good signal and quality?

Re: which of this has good signal and quality?

Re: which of this has good signal and quality?

which of this has good signal and quality?

Re: Mikrotik AP using 40Mhz but not find on the AP on the Ubiquiti station?

Re: Mikrotik AP using 40Mhz but not find on the AP on the Ubiquiti station?

Mikrotik AP using 40Mhz but not find on the AP on the Ubiquiti station?

Re: how to display Password of PPPOE user from a Mikrotik router?

Re: how to display Password of PPPOE user from a Mikrotik router?

how to display Password of PPPOE user from a Mikrotik router?

Re: Spectral Scan - what Frequency to choose ?

Re: point to point low throughput!

Re: Noise floor

Re: 20Mhz or 20Mhz/40Mhz above,below which correct fot access point ?

20Mhz or 20Mhz/40Mhz above,below which correct fot access point ?

Re: point to point low throughput!

Re: point to point low throughput!

Re: point to point low throughput!

point to point low throughput!

Connect mikrotik AP with TPLINK router?