Community discussions

Search found 12 matches

by 4lphanumeric
Sun Feb 17, 2019 3:17 pm
Forum: General
Topic: Firewall on Mikrotik box outbound connection?
Replies: 9
Views: 625

Firewall on Mikrotik box outbound connection?

Hi, is it possible to apply firewall rule to Mikrotik's own outbound connection?

My goal is to redirect the DNS port to another port, the DNS will be set in IP/DNS to use Mikrotik's DNS proxy/cache

So
Mikrotik IP/DNS -> DNS:53 -> some rule -> DNS:5353
Thank you for your help.
by 4lphanumeric
Tue Feb 05, 2019 8:08 am
Forum: General
Topic: Feature requests
Replies: 1159
Views: 204052

Re: Feature requests

Ability to swap the rx/tx representation in the graphing setting.

Normal : In -> green, Out -> blue
Swapped: In -> blue, Out -> green
by 4lphanumeric
Sat Feb 02, 2019 7:36 pm
Forum: General
Topic: OpenVPN client cannot resolve DNS through server
Replies: 0
Views: 373

OpenVPN client cannot resolve DNS through server

The title says it all. I cannot connect to the internet with block-outside-dns option on the OpenVPN client. Without it, I can browse just fine but it's leaking DNS request. 1 name="VPN-PROFILE" local-address=192.168.252.1 remote-address=VPN-POOL use-mpls=default use-compression=default use-encrypti...
by 4lphanumeric
Tue Jan 29, 2019 5:01 am
Forum: General
Topic: Set L2TP/Ipsec VPN local ip addresses
Replies: 2
Views: 459

Re: Set L2TP/Ipsec VPN local ip addresses

# DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 192.168.1.1 1 1 ADC 1.0.0.1/32 10.000.1.000 SSTP-DNS 0 SSTP-DNS-2 As you can see, there are two SSTP interfaces that show 1.0.0.1/32 as their remote address, what I want to achieve is that so each of them had a unique remote IP address. Changi...
by 4lphanumeric
Sat Jan 26, 2019 7:32 pm
Forum: General
Topic: Set L2TP/Ipsec VPN local ip addresses
Replies: 2
Views: 459

Re: Set L2TP/Ipsec VPN local ip addresses

Is this not possible to achieve? I'm honestly at lost here, I've tried setting a route rule with the VPN as a gateway but the IP is still not routing the traffic to the VPN
by 4lphanumeric
Sat Jan 26, 2019 5:50 am
Forum: General
Topic: Set L2TP/Ipsec VPN local ip addresses
Replies: 2
Views: 459

Set L2TP/Ipsec VPN local ip addresses

So, I've got two ipsec VPN up and running on my Mikrotik VPN A: remote addr=1.0.0.1, local addr=dynamic VPN B: remote addr=1.0.0.1, local addr=dynamic I'm somewhat confused because in /ip routes, those two vpn interface share the same remote addr (1.0.0.1), so what I want to achieve is set an IP add...
by 4lphanumeric
Wed Jan 23, 2019 11:37 am
Forum: Beginner Basics
Topic: Two VPN tunnel in Mikrotik, how can I set their IP address?
Replies: 0
Views: 176

Two VPN tunnel in Mikrotik, how can I set their IP address?

So, I've got two ipsec VPN up and running on my Mikrotik VPN A: remote addr=1.0.0.1, local addr=dynamic VPN B: remote addr=1.0.0.1, local addr=dynamic I'm somewhat confused because in /ip routes, those two vpn interface share the same remote addr, so what I want to achieve is set an IP address for e...
by 4lphanumeric
Mon Jan 21, 2019 6:05 pm
Forum: Beginner Basics
Topic: DHCP static lease stuck on "waiting"
Replies: 1
Views: 669

DHCP static lease stuck on "waiting"

So I've got two APs set as a DHCP client, with their address(es) that I set in the DHCP lease. The problem is, while those two APs are connected (to ether2 & ether3) and I was able to connect and surf the internet through them, the DHCP status keeps in "waiting" state. This made setting both APs rea...
by 4lphanumeric
Fri Jan 18, 2019 7:36 pm
Forum: Beginner Basics
Topic: Different hotspot landing page based on PVID
Replies: 0
Views: 193

Different hotspot landing page based on PVID

Basically I want to set two VAPs
  • Guest with PVID = 100
  • Office with PVID = 200
Assuming the PVID tagging are working correctly, how do I route the traffic so that PVID100 goes to HotspotServer_A and PVID200 goes to HotspotServer_B?

I'm using RB750r2 and the AP is connected to ether3

Thanks!
by 4lphanumeric
Thu Jan 17, 2019 7:25 am
Forum: Beginner Basics
Topic: Home/office/guest with mikrotik, I'm not certain on how to set this
Replies: 4
Views: 338

Re: Home/office/guest with mikrotik, I'm not certain on how to set this

I personally think its much better security wise to have total control over what comes in and out of the router to devices behind the router. Double NAT means that the IP the modem/gateway gives you is a private IP already and thus if you want to have the ability for outside users to gain access to...
by 4lphanumeric
Wed Jan 16, 2019 5:36 pm
Forum: Beginner Basics
Topic: Home/office/guest with mikrotik, I'm not certain on how to set this
Replies: 4
Views: 338

Re: Home/office/guest with mikrotik, I'm not certain on how to set this

Why would you use the ISPs modem and router for anything and you have given the ISP direct access to your traffic coming from wirelessly connected devices? In addition you will suffer from double nat. Can you put the gateway in bridge mode and thus give the Hex router a public IP and thus keep the ...
by 4lphanumeric
Wed Jan 16, 2019 1:14 pm
Forum: Beginner Basics
Topic: Home/office/guest with mikrotik, I'm not certain on how to set this
Replies: 4
Views: 338

Home/office/guest with mikrotik, I'm not certain on how to set this

This is the planned network topology, I'm not really certain on how to set this one. For now, what's working is: [*]I can connect to the internet from Home_AP [*]Hotspot service is running and the users are able to log in [*]BW management for home/office/guest is ok As for these, I do not know how t...