Community discussions

MikroTik App

Search found 14 matches

by lky
Sun Jan 20, 2019 2:01 pm
Forum: Beginner Basics
Topic: Can ping router, but cannot ping or connect to WAN
Replies: 31
Views: 4266

Re: Can ping router, but cannot ping or connect to WAN

So.... So here's the good news first, I managed to get the thing running AFTER having to do another factory-reset when the bridge setting was changed from ether2, the unit just disconnected and I couldn't reconnect to it. I have no idea if the change of LAN address range from ether2 to bridge was th...
by lky
Sun Jan 20, 2019 11:32 am
Forum: Beginner Basics
Topic: Can ping router, but cannot ping or connect to WAN
Replies: 31
Views: 4266

Re: Can ping router, but cannot ping or connect to WAN

Err... Ok, because that's the setting given by our ISP here for all routers. And it was working fine before upgrading to the patch v6.43.8. How do you define the LAN IP address on the bridge? The ageing-time on bridge is the default given in the Router. No changes. Maybe I'll start a new thread for ...
by lky
Sun Jan 20, 2019 5:13 am
Forum: Beginner Basics
Topic: Can ping router, but cannot ping or connect to WAN
Replies: 31
Views: 4266

Re: Can ping router, but cannot ping or connect to WAN

Hi guys, I just tried to ping from within the router to 8.8.8.8, I'm getting a timeout. I suspect there's something missing or misconfigured in the Firewall. here's the config (after the changes implemented) # jan/02/1970 02:37:44 by RouterOS 6.43.8 # software id = TR50-ZDR7 # # model = RouterBOARD ...
by lky
Sat Jan 19, 2019 4:01 pm
Forum: Beginner Basics
Topic: Can ping router, but cannot ping or connect to WAN
Replies: 31
Views: 4266

Re: Can ping router, but cannot ping or connect to WAN

Hey bro, Still not working, the router is still not resolving DNS after rebooting it, is there something else which I need to configure the DST-NAT in the firewall or change firewall rules? By the way, as you have suggested, I've changed the interface settings and disable DHCP client on ether1 . Sor...
by lky
Sat Jan 19, 2019 3:12 pm
Forum: Beginner Basics
Topic: Can ping router, but cannot ping or connect to WAN
Replies: 31
Views: 4266

Re: Can ping router, but cannot ping or connect to WAN

/interface print detail Flags: D - dynamic, X - disabled, R - running, S - slave 0 R name="ether1" default-name="ether1" type="ether" mtu=1500 actual-mtu=1500 l2mtu=1598 max-l2mtu=2028 mac-address=CC:1D:E0:40:BF:EB last-link-up-time=jan/02/1970 01:45:33 link-downs=0 1 RS name="ether2" default-name=...
by lky
Sat Jan 19, 2019 6:07 am
Forum: Beginner Basics
Topic: Can ping router, but cannot ping or connect to WAN
Replies: 31
Views: 4266

Re: Can ping router, but cannot ping or connect to WAN

Hi guys, FYI, here's the Mikrotik guide setup which I've been following as provided by some Mikrotik user here for our ISP. https://www.evernote.com/client/snv?noteGuid=5b32555e-8d6d-49f7-a206-ed75d87f86a0¬eKey=8da94a1dd8fbe9c1&sn=https%3A%2F%2Fwww.evernote.com%2Fshard%2Fs97%2Fsh%2F5b32555e-8d6d-...
by lky
Fri Jan 18, 2019 2:07 pm
Forum: Beginner Basics
Topic: Can ping router, but cannot ping or connect to WAN
Replies: 31
Views: 4266

Re: Can ping router, but cannot ping or connect to WAN

BTU (vlan500) ---> HexLiteRouter (PPoE/Vlan500, 192.168.88.1) ---> PC (192.168.88.5)

You can reference the following setup guide as shown below:
https://www.mikrotik.com.my/setup-for-unifi/

I follow the guide without any modifications (apart from entering my username and password).
by lky
Fri Jan 18, 2019 1:47 pm
Forum: Beginner Basics
Topic: Can ping router, but cannot ping or connect to WAN
Replies: 31
Views: 4266

Re: Can ping router, but cannot ping or connect to WAN

So what route and addresses should I add? Add to the routing table? Examples?

No I'm not relying on DHCP for connectivity, just static IP.
by lky
Fri Jan 18, 2019 1:33 pm
Forum: Beginner Basics
Topic: Can ping router, but cannot ping or connect to WAN
Replies: 31
Views: 4266

Re: Can ping router, but cannot ping or connect to WAN

I'm sure that the BTU modem is working because I can directly ping 8.8.8.8 using the ping tools in the hexLite router. I can also see the temporary IP assigned to it.
by lky
Fri Jan 18, 2019 1:26 pm
Forum: Beginner Basics
Topic: How to shut down Router before Power Off?
Replies: 19
Views: 9092

Re: How to shut down Router before Power Off?

The reason which I'm asking this is that I've had the experience of cutting off the power directly to the router just like that and the next day, the indicator lights on the router didn't work (light up), although the router still functions. I had to factory-reset it to get the indicator lights back...
by lky
Fri Jan 18, 2019 12:57 pm
Forum: Beginner Basics
Topic: Can ping router, but cannot ping or connect to WAN
Replies: 31
Views: 4266

Re: Can ping router, but cannot ping or connect to WAN

Hi,

FYI, both the PPoE and the VLAN work just fine, it connects to the service provider with no problems.
by lky
Fri Jan 18, 2019 4:58 am
Forum: Beginner Basics
Topic: Can ping router, but cannot ping or connect to WAN
Replies: 31
Views: 4266

Re: Can ping router, but cannot ping or connect to WAN

Err... For your information, I'm not doing DHCP on my PC, I do static IP which worked very well for me. So do I disable DHCP? I remember I didn't have to do that previously when I first setup this unit. That's really weird. here's my ppoe and vlan config /interface vlan add interface=ether1 name=vla...
by lky
Thu Jan 17, 2019 4:49 pm
Forum: Beginner Basics
Topic: How to shut down Router before Power Off?
Replies: 19
Views: 9092

How to shut down Router before Power Off?

Hi there,

I would like to know how to shut down the router (750 r2) before I switched off the router after using it daily? There isn't a power switch for the router, or this router isn't meant to be switched off most of the time?

Thank!
by lky
Thu Jan 17, 2019 4:43 pm
Forum: Beginner Basics
Topic: Can ping router, but cannot ping or connect to WAN
Replies: 31
Views: 4266

Can ping router, but cannot ping or connect to WAN

Hi there, I just factory-reset my hexLite 750r2 router and patched it with the latest patch But now I have a problem, I can ping the router (192.168.88.1) and use WinBox to connect to it from my PC (192.168.88.3), but now I cannot browse the internet nor ping outside IP (e.g. 8.8.8,8), it shows "tim...