Forcing data terminal to particular frequency band is different though. As I said it was actually what I needed. I do have 900MGz channel with appropriate signal level and 2100MGz with too low signal. I believe most of MNOs operate all technologies from same towers these days so if one technology h...

So, I tried. Both RouterOS and the modem firmware were successfully upgraded, I enter the "/interface lte cell-monitor lte1" command, it run successfully... and shows me an empty list, while modem was actually connected to 3G HSDPA 2100MGz band. The rest of behaviour was not changed. I tri...

Thanks for the advice, I'm going to check it on the weekend - the device is located in the rural area about 100km away from me and I have no remote access for now - for obvious reason.

I already upgraded to the latest stable 6.43.8 and found an information the both firmware-upgrade and cell-monitor are available in the latest beta only. However, it doesn't answer why the recommended command /interface lte at-chat lte1 input="AT*Cell=1,,,3013,1085840" seems not to work pr...

Hi. I have the following device/firmware version: Mikrotik SXT LTE Kit (RBSXTR&R11e-LTE): [admin@MikroTik] > /system routerboard print routerboard: yes model: RBSXTR firmware-type: qca9531L factory-firmware: 6.41.3 current-firmware: 6.42.1 upgrade-firmware: 6.42.1 Modem: [admin@MikroTik] > /inte...