MikroTik

Error0x29A

The ISP terminates its service to the supplied router (Alcatel I-240W-A) over passive optical technology (GPON) SFP+ module S+31DLC10D will not work, is not compatible, you need O-010S-P SFP module assuming ISP will authorise it and will help to set it up. http://www.goamt.com/wp-content/uploads/201...

Error0x29A

I remember this Valero Torres page. This was available even before I bought the module. Maybe one year ago. Now I am not sure if his firmware is newer or older than the one I have in the module already. Also, he has 3 files... Active software, passive software, firmware. To be honest, I have no ide...

Error0x29A

What concerns me is if the SFP ZISA OP151S has some bugs or I may misconfigured it. Please check the screenshot and let me know what for are UP FEC, DOWN FEC, ENCRYPT and why they are disabled? Forward Error Correction (FEC) feature can improve the quality and reach of an optical link allowing the ...

Error0x29A

Hello everyone, It's been a long time since I wrote a message to this thread. Long time since I tried to make this work for the first time but I was trying constantly from time to time... I have Zisa OP151s and yesterday I finally figured out that all changes I made were successful and the module r...

Error0x29A

You mean root as username and Pon521 as password? Does not work, unfortunately. Here is an image https://ibb.co/DbYSMgW ssh login also fails? Contact the hilink. They provided pass to fushigi and others Can someone identify the main chip from the post #258 by fushigi? https://forum.mikrotik.com/vie...

Error0x29A

Hi all, I have internet via GPON provider here in Denmark and would like to replace its fiber modem with a GPON stick that fits into my router. I contacted HiLink and thought they would send me the HL23446. What I received is a GPON stick that carries the following information on its sticker: GPON_...

Error0x29A

Picture of DFP-34G-2C2

fushigi, do you know technical specification for this ponstick? Can you post what you get when dmesg command is used?

Error0x29A

Petronas,
Two questions. Did you ask the Chinese company for setup instructions? What is your Mikrotik model and software version?
Thank you.

Error0x29A

Hello. Yes I test 192.168.1.1, and others Only conect 192.168.1.10 ssh, does not connect via web any Ip I do a port scanner and Ip that is the only available 192.168.1.10 that sends the stick No web service is active. I Just connect via ssh enter the commands to configure the manual, without succes...

Error0x29A

I am interested in one for me RB4011iGS + RM

fushigi,thank you for your time answering our questions.
In the previous post you mentioned RB4011. Does that mean your new HL-190822 works with RB4011? What is the Mikrotik software version ?

Error0x29A

They sold me this HL-190822 Good for you. Another happy fiber user :) Search on the "DFP-34G-2C2" keyword from your picture brings a Chinese company named usourcetech. They could be the original supplier. http://www.usourcetech.com/web/userfiles/download/GPONSTICKSFPCLASSB-2B_Rev01.pdf I'...

Error0x29A

oem-generic) uci set sys.target.name=oem-generic uci set sys.features.mib_customized=1 uci set sys.features.igmp_fast_leave=1 uci set sys.features.dying_gasp_enabled=0 uci set sys.features.suppress_power_level=0 uci set sys.features.eeprom_sync_option='1' The configuration code is somewhat similar ...

Error0x29A

I can't get into telnet. :( Putting on the host pc 192.168.1.1 and destination 192.168.1.57 If the easiest doesn't work for me. It is another model that sent me is entered by web and is configured as an ONT ZTE. fushigi, please explain. Your model from the picture is not HL23446. What did you get? ...

Error0x29A

Any updates? Did you receive the Gpon-hl23446-sshe module?
How well is it working with Orange or Movistar?

Error0x29A

We need to have the possibility to set the parameters GPON password and GPON serial number in MikroTik RouterOS to authenticate in ISP OLT These parameters are hardcoded into EEPROM/Flash of the ONU. Most of the time protected with a password. Read CarlitoxxPro thoughts on it https://forum.mikrotik...

Error0x29A

They sent me those specifications. Look at sshe file, there is how to connect to the sfp and get optical link parameters (and how to put them into excel) - I just scrolled through the file only so I might be wrong [emoji6] The document have some interesting information. I wish I had a module in my ...

Error0x29A

Great. Can't wait for reviews and configuration guides

Error0x29A

Screenshot_20190822-185419_Adobe Acrobat.jpg
Note 3, Grounded in Module

These specs are not always followed by manufacturers. Large clients may request different pin assignments.
On some networking site they did comparison of several GPON modules. Not all of them had ground connected to pin 6.

Error0x29A

Chinese seller answer: "Sorry, dear. My engineer told me that our GPON stick can't compatible with Mikrotik" $30 shipping, that's a lot. Unless you are in hurry. 14 days by China Air should not be more than $10-$12 Regarding compatibility with Mikrotik. I had the same problem with SFP FGS...

Error0x29A

sticks have open source openwrt login web 192.168.1.57 or telnet to sfp

What is the benefit of running openwrt on SFP? There's no wireless.

Error0x29A

Same thread here .. https://forum.mikrotik.com/viewtopic.php?t=140806 The thread you linked to has some similarities BUT it is NOT the same. Its quite apparent that RouterOS and SFP[+] cages [interfaces] do not interact with consistency across all MikroTik routerboards --- and THAT is a real shame ...

Error0x29A

.
I have not not tried to login into the SFP .... did not know that could be done because Root is locked on RoS ???

Canada Bell users. Great community and great users.
https://www.dslreports.com/forum/r32433213-

Error0x29A

It all depends on the SYNC rate used by the PON provider and whether the PON Provider will accept PON transceivers from parties that they have no affiliation with. GPON standard defines one downstream data rate of 2.48832 Gbps which any GPON ONU/ONT has potential of receiving, regardless who manufa...

Error0x29A

I am hoping that MT make the required firmware changes to enable effective PON auto-negotiation methods that better reflect market condition in Canada and the USA .. the RB4011 [excluding wireless] price point as it currently stands is excellent and it would be flying off the shelf if it did not ha...

Error0x29A

On Mikrotik page about the 4011: Note: The RB4011 does not support Passive DAC modules and SFP GPON modules They(Mikrotik) do it all the time, writing that something is not supported to avoid a headache with support queries. As I wrote in another post, Russian users have no problems using GPON modu...

Error0x29A

Mozerd just to be clear with the SFP port and that is there is nothing wrong with using that port downstream on your network when matched/mated with the right components, not everybody or every situation assumes the sfp port is upstream to the provider??? the whole point of SFP [+] port is to conne...

Error0x29A

Hi all
I need recomendation, for sfp gpon onu RB 4011.

I was try 2 moduls sfp but not work.

Thanks.

What SFP modules?
What is the software version on your RB4011

Provide some info to us.

Error0x29A

It's worth mentioning that for majority of GPON sticks we use in our Mikrotik routers, Reference Design and SDK is provided by T&W Shenzhen Gongjin Electronics Co., Ltd Minimum order is 10000 pieces if you want to order directly from the source. http://twsz.com/en/product/98/451.html TW2362H-CDE...

Error0x29A

We fight with this topic some time ago, to resume a little bit: The GPON ONU is a different kind of transceiver than no have a traditional eeprom inside, instead uses a nor flash chip (8, 16, 32 mb depending on the manufacturer) and is emulated their access after the OS was loaded/booted, this kind...

Error0x29A

Same problem. Still waiting solove.

Product discontinued.
https://mikrotik.com/product/SFPONU

Error0x29A

I've seen it in alibaba for 60-70$, minimum 1 unit.

Thanks.
Even it shows 1 unit, they are Out of Stock at this moment.

Error0x29A

If Mikrotik implents the "micronets"-stack, what guarantee is there it will work with an all-in Arris/Technicolor/whatever-only-ISP and will you be able to modify the ISPs rules anyways? Nothing is stopping modem vendors from installing security certificate on the residential gateway like...

Error0x29A

According to the links above trials are scheduled in early 2020, followed by devices certification process so it is still a couple years away before it is adopted.

Error0x29A

Has anyone was able to get OP151S modules lately?
I get signals that only supplier is out and will only resume production with minimum order of 100

Are there any other alternatives available?

Error0x29A

Not tested but this module should work. I would check with the seller first if it allows editing parameters like MAC/LOID using telnet or web interface.

https://www.amazon.com/GEPON-Stick-Address-Supported-Attention/dp/B07QVPTG6M
https://dimiks.com/products/xpon/onu/epon-onu-sfp-stick

Error0x29A

First of all, wait couple minutes after disconnecting the ISP box before trying your DHCP client. Some OLTs have MAC anti-spoofing mechanism. If OLT learns the same MAC address from two or more ONTs on the same GPON it will block the inflow from the last ONT. It also might be necessary for your DHCP...

Error0x29A

... Another strange thing is that it only negotiates at 5Gbps, not 10 ... Negotiated speed highly depends on quality and length of UTP cables used to connect peripherial devices. Exactly. And these adapters have maximum cable length 30 meters at 10GbE https://i.mt.lv/cdn/rb_files/sfp_splusrj10-1902...

Error0x29A

Certainly is and will be for the next couple years but they probably missed the boat on this one, especially now when new technology is just around the corner. New NG-PON deployments should drive xPON prices down on the second hand market not to mention plenty of choices from Korean and Chinese vend...

Error0x29A

Too late now to make any major investments in the GPON technology. Most large providers already rolled out in selected cities around the globe next generation XGS-PON or NG-PON2. These new 10Gb technologies will happily coexist with legacy GPON due to different wavelengths. In 2019-2020 more cities ...

Error0x29A

It's weird.

All my ONT SFP like H650SFP or FGS202 are working fine in another Mikrotik product RB960PGS
https://mikrotik.com/product/RB960PGS

Error0x29A

Do you know about this thread? https://www.dslreports.com/forum/r31118482-Yes-you-CAN-bypass-the-HomeHub-3000 Yes it is long but information should be there. I would also not discard possibility of using this module directly in RB4011. Bell provides different Huawei and Nokia modules. There were som...

Error0x29A

Mikrotik makes GPON SFP modules. Not to be confused with GEPON (also called EPON) technology. GPON ONU work as end terminal device. Simply inserting them into switch will not make that port to work as an OLT. Please check this link which describes GPON technology: https://sites.google.com/site/amits...

Error0x29A

That summer, all outdoor GPON Module equipped Mikrotiks quit working as soon as early summer temperatures started reaching 90 degrees ( F ). One-Hundred percent of my outdoor located Nema enclosed Mikrotik GPON modules bricked and were not recoverable. Hi Tom, can you please share what SFP brands d...

Error0x29A

Hi, I’ve got the hg8311 and the zisa gpon stick, i’m trying to get the gpon stick to work and get rid of the huawei device, how can I determine what the idONT, Serial Number, MAC is for the hg8311? and is that all I need for the gpon stick to work? Thanks! Look at the box and label. Most informatio...

Error0x29A

I've have took apart couple of SFP from different vendors. Simple ones have one small IC and no cooling at all. Others might have some tape transferring heat to the enclosure. More expansive ones like GPON SFP might contain more components like RAM, GPON chipset and flash. This requires better desig...

Error0x29A

I wonder would SFPs run colder with individual, unmanaged media converters. I use CRS for switching only and my edge router has free ports so media converters could be used. Media converter (TP-Link MC220L) I have used for testing has no factory radiators installed. With inserted SFP, it quickly go...

Error0x29A

Can anyone please post a link where this OP151S can be bought? All I'm getting some fishy hits on Google... :roll: Like mgarcia have written, you can find it on Alibaba: https://www.alibaba.com/trade/search?fsb=y&IndexArea=product_en&CatId=&SearchText=op151s Sent from my VTR-L29 using T...

Error0x29A

Answering Fushigi: I bought in Alibaba. I bought it for 60€ aprox + premium shipping 4 days. + tax = around 120€ aprox. well: finally the problem was the firmware version. after update and changing (idONT, Serial Number, MAC ) services are working in Movist. ISP in Spain, for sure the rest also wil...

Error0x29A

Thanks for the guide. I'm going to try it with the most recent LTS version Ubuntu.

Error0x29A

Should be more specific. What is your Internet connection? Do you have any WiFi infrastructure? What is your existing setup and expectations.

Error0x29A

Has anyone tried the FGS202 GPON SFP ONT module? I tried. Module itself is compatible, same Lantiq(Intel) family chipset PEB98036ETV13 (like OP151S) Facing similar problem as previously: changing Serial Number to match the one from Livebox Fibra. One of users posted flash dumps if anyone wants to t...

Search found 51 matches