MikroTik

sarenos

HI, I have 5 subnets in the same interface, and I need to drop traffic between them. I have the option of doing drop forward between one another subnet for example 0 chain=forward action=drop src-address=192.168.1.0/24 dst-address=192.168.2.0/24 log=no log-prefix="" 1 chain=forward action=...

sarenos

Thanks a lot I have tried it and works fine

sarenos

Hi, I have a bridged wireless network, and I have two internet connections in different places of my network, the idea is to install two MT routerboards as PPPoE servers connected to each internet connections. So I can balance staticaly the users per one connection or the other. I have tried it, I h...

sarenos

Dear Normus, the log says this and it's a loop always connecting and disconnecting, it has been impossible to connect constantly.

00:15:6D:D8:7C:F1@wlan1 established connection on 5300 SSID CS-002
00:15:6D:D8:7C:F1@wlan1 lost connection decided to deauth: 4-way handshake timeout (15)

sarenos

hello guys, I have an ubiquiti picostation as an access point with wpa activated, and if I try to connect with a Mikrotik CPE with firmware version 2.9.51 it's not possible to connect with wpa. I configure a security profile in the mikrotik with the preshared key configured in the ubiquiti ap and mi...

sarenos

I am trying to configure a hotspot which serves public IP’s to the customers. I have a pool of 256 public IP’s. I have configured a bridge between the interfaces ether1 and wlan1, then I have created a hotspot in the bridge interface and I have enabled proxy arp in that interface. The IP’s that are ...

sarenos

I am trying to bridge public Ip's to hotspot users in my network, for that I have bridged public and private interface and I have created the hotspot over that bridge then I have created a pool with public IP's assigned to the hotspot and I have enabled proxy-arp in the bridge interface. But it does...

sarenos

And what about using PPPoE?

I have a pool of public Ip's and I want to offer that pool for my customers.

If I'm using PPPoE? how can I do that ? have I to bridge any interfaces? anybody has done that ?

sarenos

I'm living in Castellon, that it's 60 km from Valencia and I'm working with MT for 2 years, I have been in the last MUM in Prague and I'm working for an important WISP.

It could be nice to meet you and share our experience in MT.

Regards

sarenos

Anybody knows if is there any available 3G or HSDPA for Mikrotik?

My idea is to create a Mobile hotspot.

regards

sarenos

In fact I have 2 MT, one behind the other so I have double nat.

Could be the problem ?

How can I fix the problem?

sarenos

I have problems to connect to secure websites like Hotmail, I have a dsl connection with a MT as a hotspot, If I connect directly to the DSL router there is no problem, I can access to Hotmail and https websites without problems. When I connect as a customer of the hotspot I cannot access to hotmail...

sarenos

Could you tell me the login and pass for accessing the demo.mt.lv and demo2.mt.lv?

regards

sarenos

I have a MT configured as a hotspot. I want to create different hotspot users, for example: user: sales pass: sales has access to internet and a file server user: guess pass: guess has access only to internet. For that I'm trying to create firewall filter rules and then trying to apply it in the pro...

sarenos

I know in 2,4 GHz we can use 3 channels without overlapping, for example 1, 6 and 11 in the same mast for doing point to point links.

What occurs when we are using IEEE 802.11a in 5GHz?, how many channels can we use in the same mast for doing point to point links without overlapping?

sarenos

I have trying this configuration: I have two ISP connections and I want to redirect some traffic by one ISP and P2P traffic by the other. I'm using 2.9.1 version and I have configured the router as a hotspot. The problem is that I can redirect all the traffic except the http (port 80). The counters ...

sarenos

I have trying a similar thing. I have two ISP connections and I want to redirect some traffic by one ISP and P2P traffic by the other. I'm using 2.9.1 version and I have configured the router as a hotspot. The problem is that I have get to redirect all the traffic except the http (port 80). The coun...

sarenos

I am trying to filter P2P with mangle and queue trees, it runs correctly, but the problem is that all the others services goes too slow.

the http become very slow, so all customers complains about it.

What can I do ?

Best regards

sarenos

I have configured a MT with 2.9.1 version, as a hotspot. My customers cannot access to FTP correctly. They can connect to FTP server and can log in, but when they try a "ls" or "dir", they cannot see the files. It return an error like 425 error connecting to x.x.x.x port 1121: Co...

sarenos

I am trying a new option in version 2.9.1 where you can create a simple queue and directly detect P2P traffic and shape it. It's the same as magle packets and then create a queue tree? this is my simple queue: name="control_P2P" dst-address=0.0.0.0/0 interface=all parent=none priority=8 qu...

sarenos

Thank you very much

sarenos

The problem of limiting connections is that if you have for example 50, and you have P2P programs you can use 50 connections for P2P and if you try to surf web or mail you cannot, because all possible connections are used by P2P. So I think you have to mangle P2P packets and then limit connections t...

sarenos

anybody knoes how can I limit connections in version 2.9?

sarenos

How can I limit p2p connections in version 2.9?

sarenos

When I configure hotspot in version 2.9 the universal client interface is enabled automatically.

How can I disable the Universal ?

Best regards

sarenos

I have two gateways and I'm trying to redirect P2P traffic by one and the other traffic by another. I'm using version 2.9-rc6 packet mangle print is: [admin@MikroTik] ip firewall mangle> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=forward p2p=all-p2p action=mark-connection new-connec...

sarenos

I have 2 gateways of 2 differents ISP. I want to redirect P2P traffic by one gateway and the rest by the other gateway. I am implementing mangle and policy routing, but there is something incorrect. I have 3 interfaces 2 for the gateways and 1 for Hotspot users. Ether1 192.168.0.58/24 gw 192.168.0.1...

sarenos

I think It is required to make a source NAT (or masquerading) for the outgoing traffic depending on what gateway will it use, or else we will not benefit from having two gateways. I have tried it but it fails, I don't know if I am doing something wrong. ;;; masquerade hotspot network src-address=10....

sarenos

I have put load balancing in a MT with 2 routers in the form:

gateway=192.168.0.1,192.168.2.1

the problem is that when I enable this the DNS doesn't run.

Is necesary to change or activate something when we put two gateways?

sarenos

I have tried it but it continues doing the same.

I put the IP I want to have but it's the same.

sarenos

I have a network with a MT and several access points witn fixed IP in the eth1. eth0 is connected to internet. I want to ping the access points but I cannot, because I have enabled the universal and the fixed IP of the access points are translated to other Ip as it were a hotspot client. How can I t...

sarenos

I have a mikrotik router configured as a hotspot and universal. I have several clients connected by ethernet adaptors. I want to ping to the ethernet adaptors, ( they are configured in another subnet different to the hotspot) so I have created a virtual IP in the interface in the same subnet of ethe...

sarenos

You can put simply for example yourname.com or whatyouwant.com

Try to put this and a statics IP DNS.

sarenos

Anybody knows how can I drop pings from outside my MT to inside ? so I want to do pings from inside MT to outside.

i.e. my eth0 ip address is 192.168.0.54 and my gateway is 192.168.0.1
I want to ping from 192.168.0.54 to 192.168.0.1 but I want disable ping from 192.168.0.1 to 192.168.0.54

sarenos

If you get IP by the DHCP server probably you have not configured DNS correctly.

Try to configure the static DNS and the domain name

sarenos

But I only want to block pings from de subnet 10.5.50.0 to the subnet 192.168.0.0
wlan1 has the subnet 10.5.50.0
ether1 has the subnet 192.168.0.0

I want that users can ping to internet addresses.

sarenos

I want to block ping between users that are in my wlan1 and the router I have to access Internet.
eth1: 192.168.0.2 gw 192.168.0.1
wlan1: 10.5.50.1

i.e. user with IP 10.5.50.154 can ping to 192.168.0.1

I want to block it. Anybody can help me how can I drop this pings?

Thank you.

sarenos

Great, thank you, but How can I put the MAC address of the users ? they are public users that I don´t know the MAC previously.

sarenos

I have configured in my WLAN1 the Hotspot, so I don't want that wireless hotspot users cannot comunicate between them.
I have chosen default forward to NO, but still can communicate.

Have I to do anything more to block communication between hotspot users in wireless interfaces?

Thank you

sarenos

I have configured in my WLAN1 the Hotspot, so I don't want that wireless hotspot users cannot comunicate between them.
I have chosen default forward to NO, but still can communicate.

Have I to do anything more to block communication between hotspot users in wireless interfaces?

Thank you

sarenos

Anybody can explain me the difference between dhcp-pool method and enabled address method?

Which of them is better?

Thank you very much.

sarenos

Dear Sir, I have a TPV in the LAN part and I want to access lo a Novell server that is in the WAN part. the problem is that I only want to bridge IPX traffic to reach to the server. Could I do EoIP? Can you explain me how can I configure it? Which will be the remote address ? Can you post any sample...

Search found 42 matches

drop forward between 5 subnets

Re: ¿2 pppoe servers in the same wireless briddged network?

¿2 pppoe servers in the same wireless briddged network?

Re: ubiquiti access point and mikrotik cpe doesn`t work with wpa

ubiquiti access point and mikrotik cpe doesn`t work with wpa

bridge public IP's with hotspot

public Ip's in hotspot users

PPPoE

Hi guys

3G or HSDPA

cannot access https websites

cannot access https websites

demo.mt.lv

hotspot users with different privileges

channels without overlapping

policy routing

p2p redirection

p2p filtering

ftp problem

simple queue and P2P

P2P connection limit

connections limit

universal disable

packet mangle and policy routing 2.9

P2P redirection

DNS problem

DNS problem

it's the same

monitor nodes inside MT

pings

blocking pings

Blocking icmp ping

Blocking hotspot users between them

default forward between hotspot users

hotspot gateway

TPV