Community discussions

Search found 52 matches

by adrianTNT
Tue Oct 22, 2019 2:47 am
Forum: General
Topic: Connection to local computer shows as coming from router IP
Replies: 16
Views: 1641

Re: Connection to local computer shows as coming from router IP

Does the IP look wrong in this window too ? https://forum.mikrotik.com/download/file.php?id=38387 Because Src. Addr. looks ok there, just the Reply Dst. Add. is 192.168.1.1 , not sure if that part is wrong, that is what NAT does, right ? AND I do see 192.168.1.1 as client ip on my file/samba server ...
by adrianTNT
Tue Oct 22, 2019 2:32 am
Forum: General
Topic: Connection to local computer shows as coming from router IP
Replies: 16
Views: 1641

Re: Connection to local computer shows as coming from router IP

I got it working . Sorry to waste your time. It was a samba config on linux client side. I typed command dmesg and it shown me: CIFS VFS: Dialect not supported by server. Consider specifying vers=1.0 or vers=2.0 on mount for accessing older servers So in my /etc/fstab mount line I added vers=2.0 to...
by adrianTNT
Tue Oct 22, 2019 2:03 am
Forum: General
Topic: Connection to local computer shows as coming from router IP
Replies: 16
Views: 1641

Re: Connection to local computer shows as coming from router IP

Your first dst nat rule is the reason why you see the address 192.168.1.1 in your device... So my guess is that it has nothing to do with your other computer and probably you cant access your samba device through that computer for some other reason... I tried disabling it now, and I still cannot co...
by adrianTNT
Tue Oct 22, 2019 1:42 am
Forum: General
Topic: Connection to local computer shows as coming from router IP
Replies: 16
Views: 1641

Re: Connection to local computer shows as coming from router IP

Select Bridge in left menu, then first Bridge tab and there's Settings button, and finally Use IP Firewall option, which is disabled (unchecked) by default and you most likely want to keep it that way.
hmm ... I looked now, it is unchecked.
by adrianTNT
Tue Oct 22, 2019 12:20 am
Forum: General
Topic: Connection to local computer shows as coming from router IP
Replies: 16
Views: 1641

Re: Connection to local computer shows as coming from router IP

I am not sure where to check what you said.
Can that last rule under my "routes" image be what you mentioned ?
DAC Dst. Add. 192.168.1.0/24, gateway: "bridge 1 reachable" Pref. Source: 192.168.1.1
I tried to remove it (for testing), but it said I can only remove dynamic routes.
by adrianTNT
Fri Oct 18, 2019 2:21 pm
Forum: General
Topic: Connection to local computer shows as coming from router IP
Replies: 16
Views: 1641

Re: Connection to local computer shows as coming from router IP

And this should be relevant
connections.png
by adrianTNT
Fri Oct 18, 2019 2:06 pm
Forum: General
Topic: Connection to local computer shows as coming from router IP
Replies: 16
Views: 1641

Connection to local computer shows as coming from router IP

I have the attached setup, maybe is a bit complicated but the problem is related to more simple connections. Setup is: I have 2 pppoe connections on same router (the pppoe is made by router under interfaces) pppoe-1 (82.x.x.136) is local computer 192.168.1.71 pppoe-2 (82.x.x.207) is local computer 1...
by adrianTNT
Thu Mar 28, 2019 3:44 pm
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

This image should be added to all MikroTik product images, it is a accurate representation of it's simplicity :lol:
by adrianTNT
Wed Mar 27, 2019 7:46 pm
Forum: Beginner Basics
Topic: How to remove the static switch from this setup ?
Replies: 16
Views: 674

Re: How to remove the static switch from this setup ?

The Netflix account is shared alright, just that I didn't get to the second part where we also share the price :)
by adrianTNT
Wed Mar 27, 2019 3:51 pm
Forum: Beginner Basics
Topic: Confused about VPN local IP
Replies: 2
Views: 328

Confused about VPN local IP

When I enable VPN under "quick set", I see it ads a masquerade in src-nat chain, using IP 192.168.89.0/24 And also under "PPP > profiles" the "vpn" profile has associated "local address" 192.168.89.1 - my router was set to have it's main local address 192.168.1.1 and I am not sure if the VPN should ...
by adrianTNT
Wed Mar 27, 2019 1:20 pm
Forum: Beginner Basics
Topic: How to remove the static switch from this setup ?
Replies: 16
Views: 674

Re: How to remove the static switch from this setup ?

The home account is around 6 Eur, probably not smart to keep it while not using it but anyway, there are many other things I can save before that (3 netflix type services for example :shock: )
by adrianTNT
Wed Mar 27, 2019 2:09 am
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

@adrian, are you trying to hack into my brain with a unique flashing LED sequence? ;-)
Not really, but now I am thinking ... I hope someone doesn't fetch my data by reading the leds / traffic :shock: :lol:
by adrianTNT
Wed Mar 27, 2019 1:18 am
Forum: Beginner Basics
Topic: How to remove the static switch from this setup ?
Replies: 16
Views: 674

Re: How to remove the static switch from this setup ?

I didn't knew what you meant about the savings and IP :P I got a "business" type plan with 3 dedicated IP which is max for this plan, my ISP gave me 3 pppoe accounts for that :) The accounts are set to 1000mbps down and 500mbps up so I like them, and only ~22 EUR/mo total. And for the home router I ...
by adrianTNT
Wed Mar 27, 2019 1:02 am
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

So... fixed? For now at least. Yes, for now, it seems to be most stable setup so far :D Can you tell if anything looks wrong ? e.g rules that can be removed because they don't do anything or have duplicate functions ? Maybe removing passtrough needed in any rule ? CPU usage is 1% average and 7% max...
by adrianTNT
Wed Mar 27, 2019 12:28 am
Forum: Beginner Basics
Topic: How to remove the static switch from this setup ?
Replies: 16
Views: 674

Re: How to remove the static switch from this setup ?

Thanks, I will try what csalcedo and mkx said ... If not on a tight budget, replace the ornery netis device with a hapac2 ... I had a look at it and it looks nice, I will consider it, but I am on a tight budget for now :) It would also be a plus because I can use that to experiment with RouterOS wit...
by adrianTNT
Tue Mar 26, 2019 7:53 pm
Forum: Beginner Basics
Topic: How to remove the static switch from this setup ?
Replies: 16
Views: 674

Re: How to remove the static switch from this setup ?

Some complicated setup you have there :) Home router will work as wifi too, I tried it as access point too but this particular (Netis) router caused some problems (slowing down network, ping timeouts, etc); So I prefer to just use it separately, but it needs to get the main cable signal to/from ISP ...
by adrianTNT
Tue Mar 26, 2019 7:33 pm
Forum: Beginner Basics
Topic: How to remove the static switch from this setup ?
Replies: 16
Views: 674

Re: How to remove the static switch from this setup ?

The home router would need to go few rooms away from the MikroTik, then I plug TV and others to that router, so I that I only drag one cable from MikroTik to the other room(s); and my home network setup would be separate from the MikroTik and some servers. Edit: with so many security problems in the...
by adrianTNT
Tue Mar 26, 2019 6:13 pm
Forum: Beginner Basics
Topic: How to remove the static switch from this setup ?
Replies: 16
Views: 674

How to remove the static switch from this setup ?

I have the setup from the image, one utp cable from ISP, split by a static switch, one to Mikrotik and one to a home router. I want to remove that static switch, but the setup to remain the same, so the home router will still have a direct line to ISP. How can I do that in Mikrotik settings ? Now it...
by adrianTNT
Tue Mar 26, 2019 5:21 pm
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

Nah, it is open, lucky for them :mrgreen:
I was able to fix this part, now I am trying to understand them and see if any of the rules are not needed.
by adrianTNT
Tue Mar 26, 2019 5:09 pm
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

OK, I added another route "ip routes" to use pppoe-1 interface for that ISP1_conn connection mark (seen in the image) and it seems to work.
Now I need to try to understand them all and find other things that don't work :)
by adrianTNT
Tue Mar 26, 2019 4:58 pm
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

Does this show any tips on why it would not open the web interface over port 380 ?
This is an attempt over internet (failing), but it loads from local network if I access both 192.0.0.1 or public IP too.
by adrianTNT
Tue Mar 26, 2019 1:34 pm
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

Sob, if you think you can help me by some live chat method it would be great and I think I would leave you alone faster :D
by adrianTNT
Tue Mar 26, 2019 1:31 pm
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

For the 2 connections I have now, I added the rules you mentioned, except the last group which you said might not be needed, this is what I have now. Problem is ... I still cannot reach it on port 380 when accessing from outside, but from local computers I can see the web interface at 192.168.1.1:38...
by adrianTNT
Tue Mar 26, 2019 2:27 am
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

Strategy to take down a country - drop hex routers, like leaflets, on the population and watch them self destruct and go stark raving mad. No bullets need be fired, no animals hurt in the process.
OK, I need sleep and will see what this^ is tomorrow :)
by adrianTNT
Tue Mar 26, 2019 2:26 am
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

Dont play in quickset once you start configuring the router........... The router creates dynamic routing rules if thats what you are seeing (normal). I was thinking it does that, but I wasn't sure, and I applied "quick" settings there in order for it to make the local bridge, enable DHCP and VPN. ...
by adrianTNT
Tue Mar 26, 2019 2:22 am
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

Great.
Now it works and I have no idea why, I am going crazy.
Does it need reboots on each change ?
by adrianTNT
Tue Mar 26, 2019 2:17 am
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

OK, I left that as it was since you said it is one way to do it, and I have a hard time understanding all the rules. I am very close to smashing it right now, I think what I need is very simple (e.g 3 pppoe accounts each going to/from different computer) I can't understand why I need tons of rules f...
by adrianTNT
Sun Mar 24, 2019 1:15 pm
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

I need some more help :? I think previously I didn't have things set right but it just worked for some reason. With current setup, the local computer 192.168.1.16 cannot reach public IP 82.x.x.7 UNLESS I add that blue mangle routing rule and the blue route, allow to reach that public IP by local bri...
by adrianTNT
Thu Mar 21, 2019 11:52 pm
Forum: Beginner Basics
Topic: Is it OK for all leds to run at once like this ?
Replies: 2
Views: 297

Is it OK for all leds to run at once like this ?

Is it OK for MikroTik RB3011UiAS-RM leds to lit up all at once like this ? (port 4 is unplugged) They seem to run at once with some interruptions sometimes, instead of staying off and lit up on activity individually. I found other topics where they said it is a damaged router if it does this. Or is ...
by adrianTNT
Thu Mar 21, 2019 4:50 pm
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

Hmm ... that is because I don't have the routes set yet and the reply is not sent trough the right route ?! 8)
Trying now ...
Yes, that was it.

Thank you Sob :D
by adrianTNT
Thu Mar 21, 2019 4:37 pm
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

When I think I am almost done, something goes wrong :?
Right now, the ports open on 192.168.1.16 cannot be reached from the internet. But I can connect from other local computers to it, even if I use the public IP of that target.
This is what I have now (attached).
by adrianTNT
Thu Mar 21, 2019 3:36 pm
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

Normally I have 3 static public IPs but while doing the experiments I have 2 available and one that is assigned when connecting its pppoe. Before getting your reply, I was able to make it work from local and from internet with these rules based on the hairpin url: add chain=dstnat dst-address=82.X.X...
by adrianTNT
Thu Mar 21, 2019 2:42 pm
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

Hint, inspect the required srcnat rule closely, how many public addresses do you see?
Do I need to manually add the public IP ? If so, to which rule(s) ? And I have no ideea if they should be added as "source", "destination", etc, it gets very confusing, I started using Mikrotik just days ago.
by adrianTNT
Thu Mar 21, 2019 2:38 pm
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Re: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

With the attached setup, what I am trying to do is have 3 pppoe connections from my ISP, both are made trough their same ethernet cable inset in port 1. I couldnt get past the basic math. No coffee yet this morning. :-) :? I am trying to set this up for the last 10 days, so that's my excuse. And I ...
by adrianTNT
Thu Mar 21, 2019 1:38 pm
Forum: Beginner Basics
Topic: need basic understanding
Replies: 8
Views: 624

Re: need basic understanding

Megaman, I am trying something very similar now (3 pppoe connections in same Mikrotik router), it can get a bit complicated for beginner like us :/ Here is an image (attached) if you want to have a look, I want to help but I am afraid it would only make it look more complicated. As a general ideea, ...
by adrianTNT
Thu Mar 21, 2019 1:20 pm
Forum: Beginner Basics
Topic: Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]
Replies: 63
Views: 3231

Port is open when I scan from the internet, but I cannot access it from local network [SOLVED]

// I have a separate topic but I get new issues and questions along the way and it gets confusing and unproductive, I think is best to ask / solve one by one With the attached setup, what I am trying to do is have 3 pppoe connections from my ISP, both .. sorry all three are made trough their same et...
by adrianTNT
Wed Mar 20, 2019 11:43 pm
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1435

Re: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

I modified the mangle so the rules would not match local IPs, and now I can also ping the computers locally between each other.
Does this look ok ? Anyone ? :?
Image
by adrianTNT
Wed Mar 20, 2019 9:58 pm
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1435

Re: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

OK, I will try that, but I found a bigger problem... With current setup (above), I cannot seem to ping between the hosts, do you see anything that needs editing related to this ? Also, not sure if is related or not, on a quick test I seen I can reach my.host.name from internet but not from local com...
by adrianTNT
Wed Mar 20, 2019 4:01 pm
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1435

Re: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

@flaviojunior I did it by router mark mangle and then set "routes" based on that. I added a large image above. If you understand what I did maybe you can tell me if I can improve or simplify anything. On last step I made each computer be a server on separate ISP connection, and was much easier than ...
by adrianTNT
Wed Mar 20, 2019 1:28 pm
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1435

Re: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

I was able to do it , now it is relatively simple after you do it a few times. Basically I need to - add "mangle / marking rules" on connections coming from each of my local computers, - under "routes" select the ISP pppoe account / interface to use based on the markings set in previous step. http:...
by adrianTNT
Sat Mar 16, 2019 5:55 pm
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1435

Re: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

Hi Tangram :mrgreen:

// Do you know if the VRF function is the same I can see under "ROUTING > BGP > VRF" tab ? So that I know what functions to experiment with ...
by adrianTNT
Thu Mar 14, 2019 6:03 pm
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1435

Re: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

I will try more but no progress yet, the steps in the two pages seem more than necessary. Isn't it supposed to work just by creating some firewall rules ? e.g forward public ip X to lan ip Y (for each pppoe account) and then maybe another rule in a reverse direction ? Because load balancing by defin...
by adrianTNT
Thu Mar 14, 2019 3:32 pm
Forum: Beginner Basics
Topic: Mikrotik 6.34.1 Check updates fail
Replies: 44
Views: 40795

Re: Mikrotik 6.34.1 Check updates fail

I had same problem today could not update because dns didn't find the name. It was an easy fix: - go to "ip > dns" - first box under "servers" (was empty) I entered the DNS from google: 8.8.8.8 - click OK Now it should find the host name/firmware. You can add more underneath the same box, I also ent...
by adrianTNT
Thu Mar 14, 2019 12:13 pm
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1435

Re: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

I was about to start another topic, but this already has the right title ... So using MikroTik RB3011UiAS-RM and RouterOS v6.42.10 , I want to create these 3 ppoe accounts, I am half way there ... In router port 1 I plugged my ISPs ethernet cable (comes from a fiber device/bridge but is not that imp...
by adrianTNT
Tue Mar 12, 2019 6:09 pm
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1435

Re: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

Name sounded similar to Romanian, that is why I asked :P So ... not sure if we say the same thing but I am ok with current setup... just to clarify ... I don't think they have limits at their end besides per ppoe account and modem/gpon limitation. Using both modems with different accounts should all...
by adrianTNT
Tue Mar 12, 2019 3:11 pm
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1435

Re: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

Solar77, I guess I will try a fiber module in that cage and cloning the ISP device’s mac, probably a 50/50 chance :D Victorsoares, are you from Romania too ? The ISP modem/ont might actually be limited to 1Gbps but it might still work for me if any of the 3 pppoe connectrions can reach that as max a...
by adrianTNT
Tue Mar 12, 2019 2:13 pm
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1435

Re: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

I ordered a MikroTik RB3011UiAS-RM because it has 10 gigabit ports, faster cpu, a fsp port. It was around $190 :? It has some space inside, I might end up placing my ISP fiber modem inside the Mikrotik box if it fits :) Because my ISP said today they would still not allow me to change their fiber de...
by adrianTNT
Mon Mar 11, 2019 6:10 pm
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1435

Re: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

Thanks for the details. I will try to list my requirements... It would be great if ISP would allow me to replace their device, but people that tried it were not successful. However, my same PPPOE connection(s) works from various locations in the country, where I am behind different devices of same I...
by adrianTNT
Mon Mar 11, 2019 4:23 pm
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1435

Re: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

So Cloud Core are above average speed ? I am not very familiar with the products, I find so many models confusing. On each individual pppoe account limit set at ISP is: The downlink is 1000mbps The uplink is 500mbps But the optic fiber modem (bridge) from them is also limited to 1000mbps from what I...
by adrianTNT
Sun Mar 10, 2019 4:36 am
Forum: Beginner Basics
Topic: Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?
Replies: 23
Views: 1435

Can Mikrotik / RouterOS do multiple PPPOE trough same WAN cable ?

Hello. I have 3 different PPPOE accounts from my ISP .. ISP gave me one fiber modem (now set as a bridge), I get ONE Ethernet cable out of it ... Normally I would plug that to a basic switch and connect 3 computers to it. Each computer would need to have its own PPPOE account set in windows or Linux...