Community discussions

MikroTik App

Search found 11 matches

by rexilafa
Fri Nov 15, 2019 4:56 pm
Forum: General
Topic: Internet access on static IP without PPPoE [SOLVED]
Replies: 5
Views: 1281

Re: Internet access on static IP without PPPoE [SOLVED]

Thanks ingdaka and mkx!
I checked on IP adresses and found an IP with 192.168.5.1/24. I changed it to 192.168.5.1 and that was it (kept it for another purpose).
by rexilafa
Fri Nov 08, 2019 5:54 pm
Forum: General
Topic: Internet access on static IP without PPPoE [SOLVED]
Replies: 5
Views: 1281

Re: Internet access on static IP without PPPoE [SOLVED]

Hi!
I want to disable internet access without PPPoE.
I have eth1 on WAN and eth2 as PPPoE server. Eth2 IP of mikrotik it's 192.168.5.1. If I configure any PC that access through eth2 on 192.168.5.0/24 IP range I have internet access without using PPPoE and I want to disable this.
by rexilafa
Sat Nov 02, 2019 4:12 pm
Forum: General
Topic: Internet access on static IP without PPPoE [SOLVED]
Replies: 5
Views: 1281

Internet access on static IP without PPPoE [SOLVED]

Hi!
Have a little doubt. On a PPPoE server setup, why the mikrotik allows internet access on static ip range (without pppoe user and password)?
Can't figure out where you can enable or disable this.
by rexilafa
Tue Aug 27, 2019 3:38 pm
Forum: Beginner Basics
Topic: Forward port 9081 [SOLVED]
Replies: 7
Views: 1264

Re: Forward port 9081 [SOLVED]

Thanks Sob.
by rexilafa
Fri Aug 23, 2019 6:13 pm
Forum: Beginner Basics
Topic: Forward port 9081 [SOLVED]
Replies: 7
Views: 1264

Re: Forward port 9081 [SOLVED]

Sorry to bother you with one more thing... I'm able to monitor the radios in bridge mode. But the ones in router mode are not reaching the server... From the radios in router mode I can ping the router and any other subnet without trouble. The radios get their IP assigned by the pppoe server with 17...
by rexilafa
Fri Aug 23, 2019 3:53 pm
Forum: Beginner Basics
Topic: Forward port 9081 [SOLVED]
Replies: 7
Views: 1264

Re: Forward port 9081 [SOLVED]

Added static route to radio and started monitoring.
Thanks Sob!
by rexilafa
Thu Aug 22, 2019 5:29 pm
Forum: Beginner Basics
Topic: Forward port 9081 [SOLVED]
Replies: 7
Views: 1264

Re: Forward port 9081 [SOLVED]

I don't know what you're missing, but we're missing more info. - Radios are connected to eth1-eth5, I guess? Yes, they are reachable through eth 1 and eth 2. - What's their IP config, addresses, routes? They are in 192.168.5.0/24, 192.168.10.0/24, 192.168.20.0/24, 192.168.30.0/24, 192.168.50.0/24 i...
by rexilafa
Wed Aug 21, 2019 6:00 pm
Forum: Beginner Basics
Topic: Forward port 9081 [SOLVED]
Replies: 7
Views: 1264

Forward port 9081 [SOLVED]

Hi! Needing help forwarding port 9081 (for ubiquiti aircontrol2). I added this NAT rules: add action=masquerade chain=srcnat src-address=192.168.88.88 add action=dst-nat chain=dstnat dst-port=9081 in-interface=bridge1 protocol=tcp to-addresses=192.168.88.88 Is the second one wrong? This is my setup:...
by rexilafa
Fri Aug 02, 2019 6:06 pm
Forum: Beginner Basics
Topic: Routing between bridged interfaces and a port [SOLVED]
Replies: 1
Views: 572

Routing between bridged interfaces and a port [SOLVED]

Hi! Needing a little help with setting up a router. I have a mikrotik with a bridge on ports eth1, eth2 and eth3. On eth4 I have a PC connected that I want to be able to see all subnets (there are several in 192.168.0.0/16). I have to add an ip for each subnet? (192.168.10.0, 192.168.20.0, etc) or t...
by rexilafa
Fri Jul 05, 2019 6:04 pm
Forum: Beginner Basics
Topic: Routing between subnets [SOLVED]
Replies: 2
Views: 742

Re: Routing between subnets [SOLVED]

You cannot route when you have all ports in a bridge. Take port 1 out of the bridge and route between the pppoe and the bridge.
Thanks!
by rexilafa
Mon Jun 24, 2019 6:27 pm
Forum: Beginner Basics
Topic: Routing between subnets [SOLVED]
Replies: 2
Views: 742

Routing between subnets [SOLVED]

Hi everyone! Having a little trouble with probably a simple task... - I have a mikrotik router acting as a switch with all ports bridged. - On ether 1 I have connected another router through it's wan port with a pppoe connection on the 192.168.4.0 subnet. - On ether 4 I have connected a desktop comp...