Hi guys,

Can somebody help on this please?

Do I get you right that you want to limit throughput of the traffic being bridged (i.e. not routed) between ether2 and ether4? Hi Sindy, Sorry for this late reply. I did not manage to make any progress to fix it up, so I still need your help. Indeed, I want to limit throughput for the traffic being...

Hi guys, The only point where I can control the bandwidth is on ether3, since the traffic is untagged and I can create a simple queue which can have as target the IP address of the ServerA. I didn't find yet a solution for those two vlans (101,102) which are bridged from ether2 to ether4. Is there a...

Hi guys, I’m struggling to implement traffic shaping with a hEX S (v6.45.6) for the following design, involving traffic tagged and untagged. All my attempts were unsuccessful either with simple queue or with mangle rules + queues. I’ve created two bridges on hEX S: 1. Bridge_A = traffic tagged vlan_...

Still I want to ask you about 1PPS signal. 1. Is there any component/hardware (eg: GPS) of a Mikrotik equipment which can provide to the other LAN equipment such kind of signal (1PPS)? 2. I have a heX router (NTP client) which is synchronized to a RB1100AH (NTP server). Directly connected to heX, t...

Hi PE1CHL, I'm using also a NTP server in a hEX combined with an external 1PPS signal generator. The NTP client is a unix machine which is synchronized with the hEX NTP server and via internal bus is fetching 1PPS signal. I'm to calculate the jitter. 1. Is there a way to combine the NTP with 1PPS in...

Answer to questions 1,2,4 and 5 is: No. Variation of answer to question 2: most decent switches/routers are good enough as a (single?) step in otherwise fully IEEE1588-compliant path if they are lightly loaded so that delay jitter is really low. This way the additional constant delay due to active ...

RouterOS includes limited (S)NTP support for syncing clocks. For many applications (e.g. in telecoms and industry) more time precision is required. Protocol IEEE 1588-2008 (aka PTP, IEEE1588v2) is used for this. It would be a great benefit if Mikrotik devices would support IEEE 1588 and function as...

Thank you very much, Metod!
It's clear now.

Hi guys, I have an Access Router RB1100AHx4 (v6.45.2) which is connected to internet and his NTP client is synchronized to Stratum 1 and Stratum 2 public servers. This router will act as NTP Server for LAN. In the LAN, I have another RB1100AHx4 which must be synchronized with the Access Router NTP S...

Crystal clear.Thanks for your advice. I'll use one EoIP with multiple Vlans

Good day!

Thank you very much Sindy and Sebastia for clarification.
To be honest I didn't realized that a bridge can have multiple ports assigned to it . I was trying to use one physical port for multiple bridges.
The problem is fixed now.

Have a good day!

Hey guys, I need your help concerning the configuration of multiple bridges with the same physical interface. Here enclosed is depicted schema of what I want to achieve. From our L3 switch we have a trunk interface towards the Mikrotik router office which accommodates vlan 101 and 102. These vlans m...

Hey there, Could somebody help me to decide which is the best option having multiple vlans that will be tunneled with EoIP? Should I use one EoIP for each VLAN or should I use only one EoIP who accommodates all VLANs? Would be great if you can tell me what are the advantages/disadvantages for each o...