MikroTik

zerounu

I was searching a resolve for this problem and i found this post. I tried some things posted by other users here but with no success. I have many ipsec tunnels and i didn't look carefully at ipsec policy - peer name and i looked only at numbers: it seems that they are changed and all my tunnels used...

zerounu

Hello, I'm planning to have about 4-5 vlans on our office : office with new operating systems, old xp (few with win 95 (i know, please don't laugh) computers with industrial stuff that i can't upgrade and i want to be isolated from everything except one fileserver, some old equipments, vlan x, y, z....

zerounu

Hi,

I didn't worked with lte ports but did you make a ppp connection where you do the dialing and receive the ip address ? Maybe you can make a workaround using the ppp interface .

Good luck and sorry for my poor English .

zerounu

I have 2 questions number 1: can /tool sms support multiple recipient? number2: what is channels in /tool sms. Sent from my HM 1S using Tapatalk 1. From what I know, you can't use multiple recipient directly via winbox tool . Still, you can use scripting to send the same message to multiple recipie...

zerounu

Hello, I have a CRS125 with 24 ports and I want to find what port a mac address use after 1 day . I excluded some ports but there are 10 ports and I need to be sure what port he use . I cant find it on switch fdb table because the mac address expire and I'm not in the location to see when this perso...

zerounu

Today I finally found solution to this problem: ip firewall mangle print Flags: X - disabled, I - invalid, D - dynamic 0 chain=forward action=change-mss new-mss=1410 passthrough=yes tcp-flags=syn protocol=tcp src-address=10.0.34.0/24 tcp-mss=1411-65535 log=no log-prefix="" Where 10.0.34.0...

zerounu

Thank you both very much for your help. MTU was the problem. Now it's working correctly. Have a nice day Hi, Can you post how you resolved the problem? What was the old MTU set at and to what value did you change it? Just for future reference if someone in the future is having the same issue as you...

zerounu

It was the MTU on the bridge ! When I added the vpn to my office (pptp with eoip) and bridged the eoip with switch master port, the bridge "Actual MTU" value changed to 1408 and the MTU field was grey . I added 1500 to the bridge MTU field and everything is working now . Somehow, the MTU f...

zerounu

Thank you for your responses !
I will try both suggestions and I will post here the results .

Have a nice day,
Chris

zerounu

Hello, I have installed many mikrotik routers who still works for years without any problems but I have problems with 2 of them and I could not find a solution . I have one RB951ui-2hnd and one Hap Lite and they don't load all the web pages no matter what MTU i use, mikrotik version or dns . They ar...

zerounu

Hello guys! I need to work with load balance in my router but i need to do it only using one physical network interface. All rules about LB i see use one interface for lan and every wan interface use as "exclusive" physical interface, any way to create a rule using one only interface to w...

zerounu

Use fast-track only for the private network .

zerounu

how to properly configure NAT with dynamic ip address, so i can open some ports and access them? i've gone through a lot of tutorials, but none of those works for me. tried, instead of giving dst address, to give in interface, but that doesnt work :( - for dynamic ip's you can activate ip cloud fun...

zerounu

Hello, I have a building with 5 switches (non cisco) connected to a mikrotik router . Every port on these switches belong to an apartment and I use the mikrotik router to offer them internet access . From time to time, some users started to offer dhpc services on the network, creating me problems : ...

zerounu

Hello, Is any elegant solution to restrict users access to only 2 (http and https) domains like *.abc.com and *.xyz.net and block all the other requests without using 3rd party tools ? Right now I'm using Microsoft Family Safety to achieve this but with any new user who join the corporation it becom...

zerounu

yes you can

Can you detail a little how to achieve this goal ? I dont want to use a splitter, only the left connector on the minipci card .
Can you tell me how should i config this ?

Thank you for your time .

zerounu

Hello, I've just buyed one Mikrotik RouterBOARD 711UA-2HnD and i started using it for a hotspot with a single sectorial antenna connected at j1 minipci connector . Can anyone tell me if i can use a secondary antenna on the same minipci so i can extend the coverage on a different direction (using the...

zerounu

I dont understand . If you limit client1 traffic on gateway to max 1Mb or if you limit him on cpe to 1Mb is not the same ? The queue will be on the gateway, so client1 cant overload the sector . Only 1Mb traffic will pass . It will be a problem if client1 copy from client2 something but you can drop...

zerounu

For a internet provider you need limits only on gateway and/or on client device . I use LMS open source billing solution on gateway and the traffic limits are generated on the same gateway (fedora linux) . It's working perfectly . i'm curious how others manage the bandwidth, billing, invoices . We'v...

zerounu

Shame on me :) . I use lan management system to achieve goals like this . It's a web based billing solution with bandwidth management capabilities . It's fitting very well with transparent bridges mikrotik solutions . LMs - http://lms.org.pl Mail me . i can help Why do you want everyone to mail you?...

zerounu

mail me . i can help you I have been planning on setting up a small wisp for a while now and i really want to go ahead with it. What is the basic way that you would set up a wisp? like what type of connections would you use? I want to use Ubiquiti NanoStation 2 for each client and then have a Mikrot...

zerounu

Mail me . i can help Hi ,, we have wireless network providing point to point internet service , our main controller is RB1000 with v4 OS . for the point to point links i'm using RB433 as transparent bridge in both sides how i can limit the BW for my customers , i.e. one of my customers need 1 Mbps d...

zerounu

I looked over this forum for solution of ip accounting with static IP users but no complete solution. We have about 1.000 users with static IP addresses (no pppoe, no pptp). What is the best solution for ip accounting and billing ? We used iptables for this but we want to move to full mikrotik rout...

zerounu

I have a web based billing solution . maybe we will have a chat to see if we can help each other .

my mail is cristi.stanciu@easynet.ro

zerounu

ok . i will take the laptop, serial cable and the hammer

zerounu

Hi,

I put all message type logging on, with output to memory, 1000 output lines .
I perform routerboard upgrade, update the key . But nothing . No error or output related to this upgrade or licence .
Uffff ... should i climb the tower with a hammer ?

zerounu

Here we go again ... I run mikrotik 3.10 on my rb133 . I have 1 day until my licence expires, but ... the licence don't expire . If i login again i have 23 min 56-59 minutes until expire, again and again . How can i get away from this situation ? I will soon change the board with a computer, but i w...

zerounu

Hi, If i request a key for my software id i receive the same key stored by me on a hard disk . Can be the problem the fact that if i run <system routerboard print> i receive : routerboard: yes model: "" serial-number: "" current-firmware: "" upgrade-firmware: "2.12...

zerounu

Hello, I have 1 bridge with 2 rb133 . I did not have problems until now . One RB133 become unusable after ver 3.10 upgrade . I've climbed the tower, get the board, put console cable . No boot sequence . I installed mikrotik 2.9.51 with NetInstall . The key was ok, lvl 4 licence . I maked a upgrade t...

zerounu

Try to not use shit products . I have a pcmcia tp-link card . After a while my windows computer freeze . If i unplug the card on this state, everything is ok .
Tp-link wireless is a shit .

zerounu

The problem was computer . It was an P2 450, 256 ram, hdd4 gb . After i take the hdd and put it on p3, my laptop can make association with mikrotik computer . On my bandwidth test i score 16-20Mbits udp send . Ca i obtain about >30Mbits on 2.4g ? I use r52 on mikrotik box, and the laptop have athero...

zerounu

HI, I have mikrotik 2.9.27 installed on a computer with pci to minipci bridge and one r52 card . I put computer on ap-bridge mode. I put ssid "mikrotik', channel 2432, default auth, default fw . On my first test i tried to associate with my laptop (wireless chipset is AR5005g) . I see the SSID ...

Search found 32 matches

Re: IPSec failed to pre-process ph2 packet

Multiple vlans and 2 servers

Re: Reward €50 - MikroTik LTE "bridge-mode" to ETHER1

Re: sms related query

ARP find on CRS125-24

Re: Problem when adding EoIP tunnel to interface with hotspot

Re: Can't access microsoft sites or services after bridging lan with eoip

Re: Some websites not loading on 2 routers

Re: Some websites not loading on 2 routers

Some websites not loading on 2 routers

Re: load balance with only one interface

Re: Prioritize bandwidth between private lan\wlan and guest wlan

Re: need help with dynamic ip NAT

Port Isolation

Domains whitelist few - blacklist the rest

Re: One minipci -> 2 antenna [SOLVED]

One minipci -> 2 antenna [SOLVED]

Re: BW managing for WISP

Re: BW managing for WISP

Re: BW managing for WISP

Re: Setting up a small WISP

Re: BW managing for WISP

Re: Static IP traffic accounting

Re: Redirect to Hotspot/Web Page

Re: NEED HELP WITH LVL4 KEY

Re: NEED HELP WITH LVL4 KEY

Re: NEED HELP WITH LVL4 KEY

Re: NEED HELP WITH LVL4 KEY

NEED HELP WITH LVL4 KEY

Re: Add wirless pci card to server runing MT

Re: Client association

Client association