Community discussions

Search found 1774 matches

  • 1
  • 2
  • 3
  • 4
  • 5
  • 36
by ste
Sun May 12, 2019 8:28 pm
Forum: RouterBOARD hardware
Topic: CRS317 Problems with 100MBit Devices / What a shame
Replies: 28
Views: 2831

Re: CRS317 Problems with 100MBit Devices / What a shame

The older S+RJ10 are crap. Wrong DDM information, low MTU, ... There was a post showing newer with MTU size depending on negotiation speed. So it is guesswork and luck making it work ...
Is S-RJ01 also that troublesome?
No. But not sure if the packet loss with 100Mbit devices is solved.
by ste
Sun May 12, 2019 9:29 am
Forum: RouterBOARD hardware
Topic: CRS317 Problems with 100MBit Devices / What a shame
Replies: 28
Views: 2831

Re: CRS317 Problems with 100MBit Devices / What a shame

Did anyone try actual 10/100 modules with CRS317? Or 10/100/1000 other than S-RJ01? I tried one 10/100 Cisco and some F5 Networks 1000 BASE-T but they don't seem to work with at 10/100 speed (not all that surprising). I used auto-negotiation=off speed=100mbps. S+RJ10 also doesn't work when configur...
by ste
Wed Apr 24, 2019 6:41 pm
Forum: RouterBOARD hardware
Topic: S+RJ10 Revisions
Replies: 14
Views: 1513

Re: S+RJ10 Revisions

I can confirm my S+RJ10 module (R2 18/12/06 shown on label and R2.11 shown on SFP tab in ROS) allows jumbo frame of 9000 at link speed of 2.5Gbps.
So if they negotiate down to 1G they no longer transport Jumbo Frames? Difficult to find the problem if that happens ...
by ste
Mon Apr 15, 2019 3:34 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM packet loss ether1
Replies: 7
Views: 596

Re: CRS317-1G-16S+RM packet loss ether1

Could you give me more information about "known problem with the SRJ01 module linking on 100MBit"? What is a solution for that? Changing the module doesn´t help. On one side we have a RB2011 (only copper ports) and on the other side a CRS212-1G-10S with such a module. Sporadically it goes down to 1...
by ste
Wed Apr 10, 2019 2:21 pm
Forum: RouterBOARD hardware
Topic: S+RJ10 Revisions
Replies: 14
Views: 1513

Re: S+RJ10 Revisions

@tojoe You can distinguish new S+Rj10 revision by “/r2” at the end of the serial number. There shouldn't be any issues with passing Jumbo frames, if modules are from r2 revision. Please send us email, describing your setup and problem in more detail, at support@mikrotik.com Not true. We have /r2 ve...
by ste
Thu Apr 04, 2019 5:52 pm
Forum: Forwarding Protocols
Topic: MPLS/LDP state changes
Replies: 0
Views: 174

MPLS/LDP state changes

Doing some changes to IPs/Interfaces MPLS/LDP comes to a state to not forward traffic to the interface/IP-Range of this interface. I manualy have to disable/enable LDP to make forwarding work correct. This does not heal even waiting for hours. So doesent LDP exchange information cyclic and then brin...
by ste
Mon Apr 01, 2019 2:24 pm
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 221
Views: 44819

Re: v6.45beta [testing] is released!

Its not that your router will go down if you do not install a fix for IPv6 to your router. You need IPv6 enabled. You need some that know you are running IPv6. You need someone targeting you with an attack. Quite simple. Do a traceroute to a customer. Identify the BGP-Gateway. Start Attack. Any WIS...
by ste
Thu Mar 21, 2019 2:30 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49032

Re: LHG 60G experience

Hi!

Can you give me a hint on how to transfer ALL vlans through a LHG-Link? Do I have to configure the VLANs, or is it enough to leave "VLAN Filtering" disabled on the bridge?

Thank you for your help!
Yes. Do a plain bridge and do no tagging then all packets go through.
by ste
Mon Mar 18, 2019 11:26 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49032

Re: LHG 60G experience

Hej guys, I have 750m PTP link to do and three small 230V wires by the road between these two points. Is it ok to use LHG60 kit ? I don't need 1Gbps throughput, 300Mbps will be ok. What about rain and snow, I want to sleep well :-) Snow is a problem. Expect to get problems in winter. Do a 5GHz Back...
by ste
Mon Mar 18, 2019 8:56 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49032

Re: LHG 60G experience

While Terragraph sounds interesting, it certainly can't replace P2P links (whitepaper says range is about 250m, using small antennas). The range will depend on the used antennas. PTP links will be part of the mesh. I hope different Vendors will be compatible as Radwin and Cambium has announced terr...
by ste
Mon Mar 18, 2019 5:12 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49032

Re: LHG 60G experience

On 60GHz WAP radio PCB, there is place for 5GHz radio chips, but it was never used. Mikrotik appears to be just sleeping, while competition is creeping closer and closer and may beat them at their own 60GHz game... Hopefully this will be a wakeup call and we will see some new 60GHz gear soon. They ...
by ste
Mon Mar 18, 2019 3:37 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49032

Re: LHG 60G experience

Doing backhaul + backup with one Antenna in one direction is not a good idea anyway.
Mostly it's rain backup... OK I 'll wait for ubiquiti
May take a while ...
by ste
Mon Mar 18, 2019 12:54 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49032

Re: LHG 60G experience

LHG60 is great and available (for a while now). It runs ROS which is way better than AirOS. So wrong thread to blame them sleeping. This new gear looks very small. So I guess gain is between WAP 60G and LHG60G. If you need 5GHz Backup use SXT or combine LHG60G with af5xhd using a powerbox pro. Clie...
by ste
Mon Mar 18, 2019 12:30 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49032

Re: LHG 60G experience

Mikrotik is wasting 18 months of advantage on 60 GHZ, is it possible to know if there is any hardware with 5 ghz backup in the close future? Why? UBNT will deliver such product, and there would be an AP as well, so why ask them here thinks that they now from the beginning of there 60 GHz Productlin...
by ste
Fri Mar 15, 2019 1:08 am
Forum: RouterBOARD hardware
Topic: S+RJ10 Revisions
Replies: 14
Views: 1513

Re: S+RJ10 Revisions

Interesting, I had a discussion about this after my CRS309 video last week . I was testing, including jumbo frames and it was working fine and he said it was impossible. All that I can add to this discussion is that module revision 2.11 manufactured 2018-12-06 works well. Tested it with 1Gbit Intel...
by ste
Thu Mar 14, 2019 12:35 pm
Forum: RouterBOARD hardware
Topic: S+RJ10 Revisions
Replies: 14
Views: 1513

Re: S+RJ10 Revisions

Sorry for digging up this thread. Meanwhile the RJ10 product page lists the new revision as also supporting jumbo frames (the old one did not). I have 3 rev1 modules and 1 rev2 (happely working together). Is there a way to trade/flash/... the rev1 modules to rev2? Even rev2 is old. The actual are r...
by ste
Wed Mar 13, 2019 8:40 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 279
Views: 32228

Re: wAP 60G experience

We also have two LHGG-60ad making an important 320 meters backhaul that is rock solid. Even with heavy rain it doesn't come down and 1Gb+ aggregated is not a single issue. I am replacing all my Ignitenet 60Ghz stuff (had 4 links of them) by these Mikrotik units. Mikrotik is not only 1/4 of the cost...
by ste
Wed Mar 13, 2019 6:43 am
Forum: General
Topic: Flame: Updating MT is still an adventure
Replies: 0
Views: 171

Flame: Updating MT is still an adventure

Just updated 2 CCR Core Routers to 6.42.12 (Long Term) this night. One got OSPF Problems with a neighboring router which runs a 6.39 stable version. As soon as the older router is the designated OSPF Router the connected route and all routes behind the older router do not get forwarded into the netw...
by ste
Mon Mar 11, 2019 12:42 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 7842

Re: MUM Europe 2019: new hardware

1.5km extended ethernet sounds pointless when single-mode SFP's costs next to nothing today. I still prefer a structured copper inhouse installation over fiber in many places. 1. We struggle a lot with sfp problems. Some get hot, autonegotiation is often not successful, ... 2. Some watts extra 3. N...
by ste
Fri Mar 08, 2019 7:23 pm
Forum: Wireless Networking
Topic: 802.11ax
Replies: 54
Views: 5381

Re: 802.11ax

You can buy 802.11ax routers on the shelf in retail stores already, yet zero communication from Mikrotik about their timeline... this is rather worrying. 802.11ax isn't finalized yet. You must be young. The routers on the market are "draft" ax, as in public beta. Compatibility with the final produc...
by ste
Fri Mar 08, 2019 6:40 pm
Forum: Wireless Networking
Topic: New standard 802.11ax
Replies: 25
Views: 5465

Re: New standard 802.11ax

is there even any AC pci cards we could test on a routerboard?
There is hardware: https://wikidevi.com/wiki/List_of_802.11ax_Hardware

But you need to convince MT to build a driver.
by ste
Thu Mar 07, 2019 12:27 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 7842

Re: MUM Europe 2019: new hardware

No new 60 ghz device with 5 ghz backup? First things first More and more, there is no wireless future in Mikrotik Product Roadmap........ Yes. No 802.11ax, not mentioned Terragraph (https://blog.mikrotik.com/announcements/mikrotik-accelerates-the-adoption-of-60-ghz-technologies-with-terragraph.html...
by ste
Wed Mar 06, 2019 10:32 am
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 221
Views: 44819

Re: v6.45beta [testing] is released!

Don´t cry for next new Hardware, we had to wait over 12 Month for new Arm Chipsets to get running in most cases, most here had buyed 802.11n Hardware until there is no working 802.11ac available from Mikrotik, Wave2 is completely unsupported (most available devices from MT has Wave 2 Chipset). So d...
by ste
Wed Mar 06, 2019 8:13 am
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 221
Views: 44819

Re: v6.45beta [testing] is released!

Will a new wireless driver package for 802.11ac be released in 6.45 or is it planned for a later RouterOS version? Do you have any specific information about something to happen? There are .ax Chipsets available for a while now. I guess all WISP vendors do at least some testing in Lab now. So they ...
by ste
Mon Mar 04, 2019 3:08 pm
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 29194

Re: v6.44 [stable] is released!

i update to 6.44 but when i wana use ip cloud sometimes about half of time i try "Error: request Timed out" what should i do?
Send report to support@mikrotik.com including .rif File.
by ste
Wed Feb 27, 2019 12:19 pm
Forum: General
Topic: Large route table, removing a static [SOLVED]
Replies: 8
Views: 1722

Re: Large route table, removing a static [SOLVED]

I know it is an old topic. Any changes which speeds up route changes/removals with big routing tables.

Esp. with a pending problem it is crazy to sit there waiting minutes until a command finishes.
by ste
Mon Feb 25, 2019 11:27 pm
Forum: Wireless Networking
Topic: Great news: Terragraph
Replies: 8
Views: 983

Re: Great news: Terragraph

There is no mention of mesh in that post. More likely, last mile as PtMP, especially with their last innovation: 180° coverage with single antenna https://mikrotik.com/product/wap_60gx3_ap And I meant that the wireless wire kit is available for a while. Terragraph is mesh. So if MT does Terragraph ...
by ste
Mon Feb 25, 2019 11:08 pm
Forum: Wireless Networking
Topic: Great news: Terragraph
Replies: 8
Views: 983

Re: Great news: Terragraph

It's available for a while already. And it's not competition, given the limited range. more like "last mile" solution.
It is announced for a while, not available. With this it is possible to jump from house to house with high speed. Given the high bandwidth several hops are possible.
by ste
Mon Feb 25, 2019 9:42 pm
Forum: Wireless Networking
Topic: Great news: Terragraph
Replies: 8
Views: 983

Great news: Terragraph

https://blog.mikrotik.com/announcements ... graph.html

This is competition to fiber. High speed, higher reliability through mesh. MT: I want it now.
by ste
Sat Feb 23, 2019 10:04 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50386

Re: ARM devices and NV2 protocol

With ubiquiti AF HD we are very close to have 100 mb/s download speed with 10 MHz for PtP NOW for AP side with cambium we have >300 Mb/s@20 MHz using ultra dense mu-mimo technology So if DISC Lite5 ac DiscG-5acD 240mbit (if it really works) cost is 45$, what is the cost of cambium per mbit? This is...
by ste
Sat Feb 23, 2019 9:03 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50386

Re: ARM devices and NV2 protocol

This is not AC mode, AC mode will reach around 240Mbps on 40MHz :P
yeee single TCP stream 240 Mbit from 40 Mhz :D Mby in lab.
Still a waste of spectrum these days. Hope .ax shows up soon. >100M Capacity/10MHz is 2019.
by ste
Fri Feb 08, 2019 2:54 pm
Forum: Wireless Networking
Topic: 802.11ax
Replies: 54
Views: 5381

Re: 802.11ax

And whooop .... back to topic ;-) @Normis Are you able to talk about 802.11ax ? At least what MUM to look at .... There are chipsets of your suppliers out there: https://en.wikipedia.org/wiki/IEEE_802.11ax#Silicon. So I guess you have something in your lab and as you did with 60GHz you might want to...
by ste
Thu Feb 07, 2019 8:22 am
Forum: RouterBOARD hardware
Topic: Why people pair UBNT APs with MikroTik routers?
Replies: 55
Views: 26239

Re: Why people pair UBNT APs with MikroTik routers?

Indoor: UniFi performs better than Capsman UniFi Devices had better Range than WAPac and CAPac Outdoor: Mikrotik with ARM Based Chipset is completely unusable, unstable Connections, ping lags, disconnects, TDMA not working with ARM, no Spectral Scan AirMax and other like Mimosa are miles away With ...
by ste
Wed Feb 06, 2019 3:25 pm
Forum: Wireless Networking
Topic: 802.11ax
Replies: 54
Views: 5381

Re: 802.11ax

We had the same issue in amateur packet radio and it was solved in the nineties. The solution was called DAMA and I think it is much like NV2 and AirMax, maybe less a few of the special optimizations. It is unbelievable that 25 years later there still is no 802.11xx standard that covers this and ca...
by ste
Wed Feb 06, 2019 3:20 pm
Forum: Wireless Networking
Topic: 802.11ax
Replies: 54
Views: 5381

Re: 802.11ax

LOL... Good luck with that, I'm sure manufacturers are really thrilled to publish all their secrets so they can make less money... this is simply not going to happen. Only possibility is if TDMA is part of the future official 802.11something specification. And it's a good question why this wasn't d...
by ste
Tue Feb 05, 2019 4:43 pm
Forum: Wireless Networking
Topic: 802.11ax
Replies: 54
Views: 5381

Re: 802.11ax

I heard that they are releasing new version of RoS with airmax compatibility on 1 Apr 2019
That must be RouterOS v7 !!! :D :D
Codename: Unicorn ;-)

For sure .ax will be earlier. Think back: MT was the first with .ac.
by ste
Tue Feb 05, 2019 12:21 pm
Forum: Wireless Networking
Topic: 802.11ax
Replies: 54
Views: 5381

Re: 802.11ax

I heard that they are releasing new version of RoS with airmax compatibility on 1 Apr 2019
+1 ;-)
by ste
Sun Feb 03, 2019 5:02 pm
Forum: Wireless Networking
Topic: 802.11ax
Replies: 54
Views: 5381

Re: 802.11ax

There is a (big) arm/nv2 thread already.
This thread is about 802.11ax. Would like to hear about it, too.
by ste
Tue Jan 29, 2019 3:08 pm
Forum: General
Topic: Don't buy Mikrotik hardware! NO SUPPORT
Replies: 15
Views: 1186

Re: Don't buy Mikrotik hardware! NO SUPPORT

Yeah, i know how sound this. Yes, config is not a problem! default config for WAPac and linux/windows PC with broadcom chipset have problem also. I'm certified Mikrotik user :) The problem persist from one firmware to another, even if i send all necesary info to mikrotik support. Cisco support is v...
by ste
Thu Jan 24, 2019 4:14 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM packet loss ether1
Replies: 7
Views: 596

Re: CRS317-1G-16S+RM packet loss ether1

We use this port only for management in case we mess up vlan config. Guess this is the intended use. But of course no packet loss should happen.
by ste
Thu Jan 24, 2019 3:58 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM packet loss ether1
Replies: 7
Views: 596

Re: CRS317-1G-16S+RM packet loss ether1

Hello, i have problem with CRS317-1G-16S+RM on ether1 is packet loss. if i have in ether1 device linking on 10Mbit or 1Gbit everything is allright, there is no packet loss. but if i have device linking on 100Mbit i have packet loss and rises rx fcs error and rx fragment. i have three CRS317-1G-16S+...
by ste
Thu Jan 24, 2019 1:07 pm
Forum: RouterBOARD hardware
Topic: InterCell
Replies: 42
Views: 3636

Re: InterCell

Unfortunately we can't make the Product that supports both B43 and B48 so you would need to choose which one you would need. Any other requirements - output power, CA support, bandwidth width, etc...? B43. Output power as high as possible. We use this band esp. where 5GHz does not work out. 10/20MH...
by ste
Thu Jan 24, 2019 12:23 pm
Forum: RouterBOARD hardware
Topic: InterCell
Replies: 42
Views: 3636

Re: InterCell

Unfortunately we can't make the Product that supports both B43 and B48 so you would need to choose which one you would need. Any other requirements - output power, CA support, bandwidth width, etc...? B43. Output power as high as possible. We use this band esp. where 5GHz does not work out. 10/20MH...
by ste
Wed Jan 23, 2019 3:44 pm
Forum: RouterBOARD hardware
Topic: InterCell
Replies: 42
Views: 3636

Re: InterCell

You can't "use them". InterCell is a base station that can be ONLY used if you are a licensed mobile operator. And if you are, you need to buy the license for B38 anyway. For Germany only 3,5GHz was licensable for regional WISPs. This moves to 3,7-3,8 which renders our WiMAX Equipment useless. Do y...
by ste
Wed Jan 23, 2019 2:29 pm
Forum: RouterBOARD hardware
Topic: InterCell
Replies: 42
Views: 3636

Re: InterCell

You can't "use them". InterCell is a base station that can be ONLY used if you are a licensed mobile operator. And if you are, you need to buy the license for B38 anyway. For Germany only 3,5GHz was licensable for regional WISPs. This moves to 3,7-3,8 which renders our WiMAX Equipment useless. Do y...
by ste
Thu Jan 17, 2019 11:54 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50386

Re: ARM devices and NV2 protocol

I think these could easily been avoided all by indicated in the spec sheet: Model: xxxxxxx Transfer speed via wireless link ( ideal condition ) 802 - 400mbps both directions TCP nv2 -100mbps both directions TCP nsextreme - 120mbps both directions TCP something like that. Then the customers would ha...
by ste
Wed Jan 16, 2019 6:05 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50386

Re: ARM devices and NV2 protocol

There are many reasons why older models can't be made anymore, and why new models have other types of chips, I can't go into that detail. There are other ways to resolve this, but they need new hardware. For now you can use any outdoor devices with 802.11n (non AC), they are MIPS, for example LHG, ...
by ste
Tue Jan 15, 2019 5:26 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50386

Re: ARM devices and NV2 protocol

At the end on Monday Im going to remove all my arm hardware it's too dificult for me and Too expensive but it's the solution. Bye Mikrotik see you in the hell... Dramatic. Phrasing on forums is realy dumb. Go to your local bakery and if they have old bread. Turn to the salesman and wish him to go t...
by ste
Tue Jan 15, 2019 1:00 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 531
Views: 49032

Re: LHG 60G experience

You can't just make a random aluminum dish and expect it to be better just because of material. There are calibrations done, specifically for the original grid. Antenna design is a precise science, not a form of metallurgy. Indeed. Especially remember that the higher the frequency (hence, the short...
by ste
Wed Jan 09, 2019 11:23 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 50386

Re: ARM devices and NV2 protocol

802.11ax may change things 802.11ax is useless without Software revolution, but with the delay they have had for AC, we would probably see AX in 2021, ROS 7 could be available..... Mikrotik despite doing not enough for nv2 was the first wisp vendor offering an .ac product. Problem with .ac and tdma...
  • 1
  • 2
  • 3
  • 4
  • 5
  • 36