Community discussions

MikroTik App

Search found 21 matches

by hapoo
Mon Aug 03, 2020 3:39 am
Forum: General
Topic: WOL not working on subnet [SOLVED]
Replies: 10
Views: 1999

Re: WOL not working on subnet [SOLVED]

Figured it out. It had nothing to do with Mikrotik and everything to do with windows. The motherboard I was using was an Asus with an integrated Intel l211-AT NIC. The default drivers that come for windows don't actually enable WOL so the the NIC was turning off after shutting down from Windows (It ...
by hapoo
Sun Aug 02, 2020 11:40 pm
Forum: General
Topic: WOL not working on subnet [SOLVED]
Replies: 10
Views: 1999

Re: WOL not working on subnet [SOLVED]

So I modified every suggested setting in Windows, but still couldn't get it to work. Pulling up the stats for ether5, when the machine is on and I send a WOL packet, I can clearly see the Tx Broadcast increment. When the machine is off though there are no packets sent and no stats increment. So I'm ...
by hapoo
Sun Aug 02, 2020 8:11 pm
Forum: General
Topic: WOL not working on subnet [SOLVED]
Replies: 10
Views: 1999

Re: WOL not working on subnet [SOLVED]

I did as you suggested and the WOL packets are in fact getting through, at least while the system is powered on. I guess it may not be a router issue, but something due to the software/hardware on the computer. Its very frustrating since these machines are obviously remote and I don't have physical ...
by hapoo
Sun Aug 02, 2020 4:08 pm
Forum: General
Topic: WOL not working on subnet [SOLVED]
Replies: 10
Views: 1999

Re: WOL not working on subnet [SOLVED]

It’s actually not a VLAN. And I’ve tried bridge, VPN-bridge and ether5.
by hapoo
Sun Aug 02, 2020 5:24 am
Forum: General
Topic: WOL not working on subnet [SOLVED]
Replies: 10
Views: 1999

Re: WOL not working on subnet [SOLVED]

I have more than 15 of these exact systems setup. I’ve tested 4 systems so far but have only been able to get WOL working on one of them. The one that it worked on had a slightly different setup wherein ether2-ether5 are all on the standard 192.168.50.0 bridge, the computer got a 192.168.50.x addres...
by hapoo
Sun Aug 02, 2020 4:16 am
Forum: General
Topic: WOL not working on subnet [SOLVED]
Replies: 10
Views: 1999

WOL not working on subnet [SOLVED]

I have a rather strange setup and suspect that it may contribute to the fact that I can't get WOL to turn on a computer. (I have confirmed its turned on in the computers bios) On a Hex S I have ether1 connected to Wan, ether2-ether4 connected to the standard bridge on the 192.168.50.0/24 subnet (wit...
by hapoo
Sat May 09, 2020 7:13 pm
Forum: Useful user articles
Topic: Bypassing AT&T Residential Gateways with MikroTik
Replies: 181
Views: 36778

Re: Bypassing AT&T Residential Gateways with MikroTik

I want to clarify with some information provided to me. The ATT Residential RG sends all outgoing packets as 802.1p (tagged with VLAN 0). Their Commercial gateways sends all outgoing packets as 802.1q PVID 2 (tagged with VLAN 2). These are not always enforced, as I understand it. My residential 1G ...
by hapoo
Mon May 04, 2020 6:12 pm
Forum: General
Topic: trouble resolving domains using remote dns server over ipsec [SOLVED]
Replies: 2
Views: 1134

Re: trouble resolving domains using remote dns server over ipsec [SOLVED]

Once again you’ve fixed it Sindy. Thank you so much!
by hapoo
Mon May 04, 2020 9:17 am
Forum: General
Topic: trouble resolving domains using remote dns server over ipsec [SOLVED]
Replies: 2
Views: 1134

trouble resolving domains using remote dns server over ipsec [SOLVED]

I'm sure I'm doing something stupid, but no matter what I do I can't fix this issue. I have two networks connected via ipsec vpn with the following setup: /ip ipsec policy add disabled=yes dst-address=10.39.26.0/24 peer=VPN-peer proposal=VPN-proposal src-address=192.168.88.0/24 tunnel=yes /ip ipsec ...
by hapoo
Wed Apr 08, 2020 5:16 pm
Forum: General
Topic: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]
Replies: 14
Views: 3820

Re: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]

Same here. All the ones I found with 30m timeout issues were RW installations so I don’t think it was two mikrotiks.
by hapoo
Wed Apr 08, 2020 12:48 am
Forum: General
Topic: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]
Replies: 14
Views: 3820

Re: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]

sindy... you are AMAZING! That fixed it.

Thank you SO much for walking through that with me so patiently! That solved it. And now I know why there's a groups option in ipsec that I always skipped over : )
by hapoo
Tue Apr 07, 2020 10:55 pm
Forum: General
Topic: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]
Replies: 14
Views: 3820

Re: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]

Server: # apr/07/2020 15:45:46 by RouterOS 6.45.8 # software id = # # model = RB760iGS # serial number = /ip ipsec profile add dh-group=modp2048 enc-algorithm=aes-256 hash-algorithm=sha256 name=MGMT /ip ipsec peer add exchange-mode=ike2 name=MGMT passive=yes profile=MGMT send-initial-contact=no /ip ...
by hapoo
Tue Apr 07, 2020 9:38 pm
Forum: General
Topic: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]
Replies: 14
Views: 3820

Re: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]

I'll have to test one from the very second it establishes, but looking at the "uptime" on "active peers" I tested 6 of them over 20min old and without exception all pings cut out anywhere from 24m 2s to 24m 30s. Looking at their SA's, their soft lifetimes all seem to be in the same range. So it's cu...
by hapoo
Tue Apr 07, 2020 4:07 am
Forum: General
Topic: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]
Replies: 14
Views: 3820

Re: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]

Thank you for the detailed response sindy. I don't understand ipsec quite well enough to figure this out myself, so I appreciate your help. The setup is a little messy, but I'll try to explain it. The "Server" Router is currently running v6.45.8 (It was running the latest, but I just downgraded it j...
by hapoo
Sun Apr 05, 2020 8:26 pm
Forum: General
Topic: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]
Replies: 14
Views: 3820

Re: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]

Set both sides to none, same thing. It's still set to expire in 30 min on the server side
by hapoo
Sun Apr 05, 2020 2:04 am
Forum: General
Topic: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]
Replies: 14
Views: 3820

Re: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]

I had them matching and still had the issue. When googling the issue I ran across other people with similar problems with the suggestion to set the pfs-group to none on the client. Here is one such link: https://forum.mikrotik.com/viewtopic.php?t=125617 Honestly it makes no difference. The client se...
by hapoo
Sat Apr 04, 2020 4:19 am
Forum: General
Topic: IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]
Replies: 14
Views: 3820

IKE2 tunnels timing out. SA expiring in 30 min. [SOLVED]

I've read a lot of pages with people talking about this, but none of the suggestions have worked. The tunnel connects fine, but after about 25 min the connection stops working and after 30 min I get "IPsec-SA expired before finishing rekey" in the logs. The SA Typically has this: Add Lifetime 00:24:...
by hapoo
Sat Nov 09, 2019 3:44 am
Forum: Beginner Basics
Topic: Setting up Ipsec tunnel prevents access to webfig
Replies: 0
Views: 617

Setting up Ipsec tunnel prevents access to webfig

Sorry if I have trouble explaining this, bear with me. I'm attempting to setup a site-site ipsec tunnel. I only have the ability to control my end of things. I've been assigned a /30 ip range but that's within the remote sites range of /8. So for example, my side is 10.1.1.8/30 10.1.1.9 intended for...
by hapoo
Thu Apr 25, 2019 10:20 pm
Forum: Beginner Basics
Topic: wpa_supplicant on rb4011
Replies: 7
Views: 1545

Re: wpa_supplicant on rb4011

The quote talks about client side support coming next, so that should be what you need. If you're not in a big hurry, give it few days and you'll see. Thanks Sob, I saw your post after I wrote mine. Thankfully I'm at least a month away from actually needing it since they haven't actually rolled out...
by hapoo
Thu Apr 25, 2019 9:47 pm
Forum: Beginner Basics
Topic: wpa_supplicant on rb4011
Replies: 7
Views: 1545

Re: wpa_supplicant on rb4011

Is that the dot1x they just added? That seemed to me to be a 802.1x server not a client. Although as I said, I have little knowledge about networking and even less so about mikrotik. Is there any hope of it being supported any time soon? Basically should I get the rb4011 or just go for the inferior ...
by hapoo
Wed Apr 24, 2019 1:47 am
Forum: Beginner Basics
Topic: wpa_supplicant on rb4011
Replies: 7
Views: 1545

wpa_supplicant on rb4011

Hello everyone. I have a bunch of questions and I'm quite new to all this so please forgive me. I'm planning on switching to a gigabit AT&T Fiber connection in the near future. Unfortunately they force customers to use AT&T modems/routers which are quite horrible, the reason being that the modem is ...