MikroTik

JJT211

Can you create a second proper "type=loopback" interface or do you need to still do it the old school way of creating a bridge interface with no ports?

JJT211

IGP = Interior Gateway Protocol = OSPF, ISIS, ect

He's asking why you arent running a traditional IGP like OSPF to distribute your routes inside your AS?

JJT211

Put into production on CCR2116-12G-4S+ with 3 full BGP tables (2 IPv4 only, 1 IPv6 only) No, I haven't gone crazy, I have multiple RouterBOARDs in HA on the same link... Ive seen you post this several times that you have 2 RB's in HA. One with v6 and the other on the latest v7. Just curious, how ar...

JJT211

Well if you say so....Ill look into it. Bu there ya go, more work. The work it takes to learn more CLI shit and prep scripts. I only use CLI when absolutely necessary or when copying over large configs from one to another. I highly prefer Winbox as im not as CLI gifted as others Its just a friendly ...

JJT211

When having these numbers of static devices, you might want to consider doing it through cli.

Again, more work.

Winbox is what really sells Mikrotik to the average user wanting to break in to serious networking

Its just a suggestion to make Mikrotik more user friendly and work flow efficient

JJT211

Yes, im aware its there. Im just saying the Right Click Make Static option is far more convenient. For me at least. I use it all the time. Its one less step. v7 method 1 - Highlight DHCP lease 2 - Move mouse up top to Make Static button along top and click 3 - Move mouse back down to locate DHCP lea...

JJT211

Is it just me or did the highlight DHCP lease, right click "Make Static" option disappear?

Make static is available at the top of the DHCP lease box, but making a static lease by right clicking while highlighting is so much more convenient.

JJT211

ROS6 will be patched also?

Regards.

Yes, it says so, but it appears it hasnt been released yet. That said, it appears its a rarely used setting combination.

None of my routers have it set that way

JJT211

Agreed, not just stylistic. I recall using a short lease-time interacting poorly with power saving on iOS, likely others. 30m seems like a good middle ground. What is the reason to have such short lease-times? Maybe it is useful in a guest wifi in a restaurant or similar, but in "normal" ...

JJT211

As of 6.48.6 LTS on Tile it appears it is supported /system health print oid temperature: .1.3.6.1.4.1.14988.1.1.3.10.0 cpu-temperature: .1.3.6.1.4.1.14988.1.1.3.11.0 psu1-state: .1.3.6.1.4.1.14988.1.1.3.15.0 psu2-state: .1.3.6.1.4.1.14988.1.1.3.16.0 fan1-speed: .1.3.6.1.4.1.14988.1.1.3.17.0 fan2-sp...

JJT211

I know we are not minority that's why I said as far as MT is concern or POV, anyway honestly it makes me wonder why BGP and MPLS is in the bottom of their priorities just tired stressing this enough for over and over not only me but with a few others here I dont think its their lowest priority, its...

JJT211

Whats the advantage of using over BGP only vs hybrid OSPF/BGP? Less complexity? It seems more like a L2 network with BGP on top....Im not trying to knock it...just dont fully grasp it yet.

JJT211

So that fix...did NOT fix?

JJT211

Please use resource on getting a long term 7.x version. As it is now there are new 7.x train every week, but not may bug fixes for current train. Latest releases that should be followed up 7.1.5 - 22 Mars 2022 (maybe 7.1.6 LT next) 7.2.3 - 2 May 2022 7.3.1 - 9 Juni 2022 7.4.0 - 19 Juli 2022 Its cuz...

JJT211

Important note!!! - Container package is not available in v7.4. Development and testing continues in "testing" channel. Wow, every day we check the stable release, in order to start a project via containers. All I had to do was check again ... Honestly, something has changed in your compa...

JJT211

So stuff that was inside a release candidate is withdrawn.
Mikrotik is totally bonkers!!!!

The stuff that was not included, most likely isnt considered "stable"

JJT211

Was able to update directly from Winbox at home, but cannot update at work???

JJT211

If you're single-homed (meaning only 1 upstream ISP advertising BGP), then you'll very likely only need a default route, which in your case the 1009 should suffice

JJT211

Chateau updated without issue.
Is DNS over TLS supported yet?

What advantages does DoT have over DoH? If you had to pick one, is that the one you prefer? Why?

JJT211

*) fixed managed list category grouping when value is IP with port;

Oh nice

JJT211

Yeap, as I always read this forum before upgrade, this time I did not. My ac3 with ww2 is now bricked. Stable version, hahaha.

Netinstall possible or is it completely bricked? If so, thats fukt

EDIT: Looks like it is possible, just needs some perseverance

JJT211

Another great STABLE release from MT. Guys you should wake up and fire the person who is responsible for testing those stable builds. I have 2x hap AC3 and Im lucky I did not install this very stable biuld. The problem has been announced at 2:35 p.m. Im just curious how long MT will leave this buil...

JJT211

Ive been checking DNS this way for a while but just came across this issue just now. I guess it makes sense if you think about it as the Winbox application resides on the PC not the router but this is very misleading IMO. Moving forward, Ill be testing DNS via address-list but I would consider this ...

JJT211

Was this meant to be the new long term release?
Why would you run the cube lite 60 and the wireless wire nray on anything but long term?

Unless there's a specific fix/feature you need in the stable train for a specific reason on a specific device.....why would you run anything but on long-term?

JJT211

BUMP

FYI, Author is regularly optimizing guide. And there's some recent updates in there for Route loop prevention that all networks seem to have. Check out his blog

https://www.daryllswer.com/edge-router- ... -for-isps/

JJT211

Is anyone having issues using the Bridge method on 7.2? When I upgraded from 7.1.5, it no longer worked and the DHCP client never received an address. When I downgraded back to 7.1.5, all is fine.

JJT211

Would this fix be related to running scripts such as the ATT gateway bypass ? My ATT gateway bypass was broken in 7.2 but working in 7.1.5 EDIT: Just tested on an RB4011, ATT gateway script still not working. Reverted back to 7.1.5. What error are you getting? Im not getting anything. After booting...

JJT211

Would this fix be related to running scripts such as the ATT gateway bypass? My ATT gateway bypass was broken in 7.2 but working in 7.1.5

EDIT: Just tested on an RB4011, ATT gateway script still not working. Reverted back to 7.1.5.

JJT211

Not sure if this has been reported, as its kind of an unoffical thing, but when upgrading my home RB4011 from 7.1.5 to 7.2 my ATT Gateway bypass using bridge method is no longer working. Did multiple reboots of both gateway and router and still wont obtain dhcp address. I then downgraded back to 7.1...

JJT211

Bump +1

JJT211

once again, I admit it was my fault. to much faith. i'm with mikrotik since routerOS 2.9.27 or so. So I had many many situations up to now, with buggy routerOS. I Should have learn it. So last time after many succesfull hand made upgrades decided to do it on mass. Stupid I was. And since that time ...

JJT211

Just want to post up something positive for a change. Im definitely going to hold off on anything production related but at home my RB4011 has been running well with 0 problems on 7.1 since release.

JJT211

Wow, that was very anti-climatic. Mikrotik's definition of "stable" baffles me. I mean, even this thread itself does not have stable in its name. At the very least you could list the available features that are NOT stable. Or at least reference the routing protocol status page Ill be waiti...

JJT211

Thanks for getting this out in 2021 MikroTik!

I know sometimes it probably feels like all you get is negative feedback but the pace of development has really stepped up for v7 and it is both noticed and appreciated :)

I'll second this....y'all don't get enough credit. It's very exciting times!

JJT211

Hi MRZ,

tried upgrading to version 7 and to be honest it doesn't work, plus the bgp had a major memory leak that duplicated the learned routes every 2 mins until the box ran out of memory, so downgraded back to version 6.49.1

v7 is still in development, not for production use.

JJT211

Dont have much experience with it but ive read that Mikrotik BFD doesnt play well with other vendors atm. Should be fixed in v7

JJT211

I feel the forum is taking a turn for the worse. Asking commentators to post a config or it didn't happen and other forms of proof. All is a bit harsh. Hats off to those that did apply the proof that they were telling the truth! Geez. Have some faith in people. MT forums are usually populated by pr...

JJT211

You need to back up that claim with some hard data I took some time to capture a full 1 hour video to demonstrate the difference between 2 versions: ---------------------------------------------------------------------- total_dns_boot time_version 6.46.8___~ 1 minute total_dns_boot time_version 6.4...

JJT211

a noticeable performance decrease

"Noticeable" screams placebo and/or other issues. You need to back up that claim with some hard data homie

JJT211

I discussed about this with Normis some time ago and he insisted Mikrotik does it properly, there shouldn't be cumulative changelogs, we should read all changelogs by ourselves. Certainly Mikrotik has the authority to choose the best RouterOS release and upgrade cycle in the best interest of their ...

JJT211

FCK MIKROTIK!!!! https://yoursmiles.org/ssmile/wonder/s1003.gif https://yoursmiles.org/ssmile/wonder/s1016.gif https://yoursmiles.org/ssmile/wonder/s1003.gif https://yoursmiles.org/ssmile/wonder/s1016.gif https://yoursmiles.org/ssmile/wonder/s1003.gif https://yoursmiles.org/ssmile/wonder/s1016.gif ...

JJT211

Nice changelog! I think its possible to tell your staff these things on the Mikrotik LAN vice public forum, or were you simply trying to point out the HUGE improvement over the latest 7.1c release LOL. I would never have noticed unless you brought it up. ;-PP Yea, it wasnt until the second post tha...

JJT211

Thats likely because a single prepend to ISP B is not enough and some inbound traffic still has a shorter route through ISP B than they do ISP A. Try multiple prepends of ISP B

JJT211

Yes, that problem seems to also be present in others lists as well. Try "Interface List" -> "Ethernet" and select only the first 5 columns and any one at the end like "Tx Unicast". I see that another random column got selected. Now if I remove the "Tx Unicast"...

JJT211

This is amazing

JJT211

On all routers set redistribute-connected=no Im new to OSPF but I believe in most cases, you should only distribute routes by the network tab. Leave everything set to no with the exception of the default route CHR1 for example, should look like this /routing ospf instance set [ find default=yes ] di...

JJT211

BUMP 5 years later and we're finally in ROSv7 territory. Im curious if this issue has been addressed in a previous ROSv6 release or the current ROSv7 Beta. EDIT: I figure it better to update this thread than to necro another. According to this post , it has not been addressed and still remains. But ...

JJT211

I would start with running the LTS firmware 6.47.9

JJT211

On the CSS610-7R on 2.13, the Egress rate appears to work correctly within about ~20M. But the Ingress rate, limits to <1M no matter what setting I use.

JJT211

On my Netpower 7r (also a CSS610), im getting the temp just fine. Its located in the system tab under the health section

JJT211

UPDATE 3/12:

Appears 2.13 stable is available from the update tab on SwOS gui only (hasnt been posted to Mikrotik downloads section yet). So far so good

JJT211

Breaking news! Mikrotik has released v2.13. Here is the changelog from my device: 2.13 (built at Mon Feb 01 2021 04:43:13 GMT-0800 (Pacific Standard Time)) What's new in v2.13: *) properly report SFP port speed; *) make SFP port work in forced 1G speed mode; *) make fiber optic modules work with au...

JJT211

8 out of ~100 hap lite were bricked during upgrade from 6.46.8 to 6.47.9 and required netinstall. In some cases (seems totally random) Avaya IP phones can't get IP address from Mikrotik with ROS 6.47.9, ROS 6.46.8 is working fine. Will revert to 6.46.8 everywhere. Same exact thing happened to me wi...

JJT211

JJT211

Any updates? I have a few netpower lite 7R devices - different firmware but sharing mostly the same bugs, waiting with installation until fixed (too costly to replace on the roof if something goes wrong during remote upgrade, difficult to reboot with redundant power from several customers). I just ...

JJT211

Changelog from Mikrotik support: RC5: It should improve the management connectivity for the SFP+ interfaces. Other fixes and improvements are coming, but I cannot comment when the stable version will be released. RC6: We have created a new testing version (rc6) which addresses some of the VLAN relat...

JJT211

UPDATE 3/12: Appears 2.13 stable is available from the update tab on SwOS gui only (hasnt been posted to Mikrotik downloads section yet). So far so good ____________________________________________________________________________________ Since there is different firmware between this model (CSS610-1...

JJT211

So how is RC12 doing? Anyone using it in production? I have a few of the Netpower 7R's and all I really need is basic VLAN functionality with reverse POE at gigabit speeds. I have no use atm for the SFP. They are up to RC25 now. Check the other thread on this section. Some things are still borked, ...

JJT211

So how is RC12 doing? Anyone using it in production?

I have a few of the Netpower 7R's and all I really need is basic VLAN functionality with reverse POE at gigabit speeds. I have no use atm for the SFP.

JJT211

Same as yours:
5 sec and 1514 bytes
I wonder if those values need tweaking to give a potentially better outcome.

Yea, I was wondering the same. It seems the consensus in other places than this thread, is to use perturb=10 in order to mimic CAKE/FQ-CODEL as much as possible.

JJT211

Mikrotik support punted and gave me the "default" useless answer: "Hello, Thank you for contacting MikroTik Support. You can download the latest releases from our download page, www.mikrotik.com/download, or wait till the next version is releases with fixes. Best regards, Oskars K.&q...

JJT211

Can someone update me on the current status of the CSS610 firmware? Can one access the management site over the SFP+ ports? Do VLANs properly work now? Any other pressing issues remaining? How far away is this software from deploying in a small production environment? Thanks, MB Scroll up the page ...

JJT211

Just installed rc12 after we power cycled the router to regain access to it.

Cool, keep us posted

JJT211

I see everyone saying that links >1km should use 58320Mhz and when put into Auto mode, it always sets itself to 58320. (My link is ~400m)

But what about in heavier rain zones like the Southern US? Has anyone tried using 64800 due to the higher frequency being more rain friendly?

JJT211

Its very likely a software bug. If everything is working, I wouldnt read much into it. The firmware is still in BETA and currently at 2.13RC12. DL link is towards bottom of this thread incase you're interested. But if everything is working, I would just wait until a stable is released

JJT211

We are still running rc6 and had it stop responding to pings and SNMP today. At first I thought it was cold related (10 degrees F when the problem began) but it never cleared up once it warmed up. I have not rebooted the switch yet. It is still passing traffic but we can't get at it, it won't respo...

JJT211

^^^ This

I was just testing things out to see if I could deploy one but noticed the same thing, any change requires a reboot and I just cannot risk it.

JJT211

Changing management IP requires reboot.

JJT211

Guys, seriously? This is NEW product. Not really tested by earth and fire. If you're planning a commercial install based on an untested product - it's not MKT problem, it's your risk management. Go check Cisco forums for new products they release. Give folks some slack. We have January 25th, 2021 ....

JJT211

JJT211

Yea, DHCP still doesn't work for me. You have to set a static

JJT211

It is what it is everyone.

Thanks EdPA for sharing info and latest RC. I do have my VLANs working now with some brief testing.

JJT211

https://box.mikrotik.com/f/a72e315282d149eda481/?dl=1 There is the link they sent me for RC6. I guess if they object to this, they can delete this post. Since it is from their servers and they willingly sent me the link, I hope it is OK to put it here. I guess I should state this is a release candi...

JJT211

Firmware is still in Beta. There's still tons of bugs and we're all waiting on a stable version. The CSS610-8G-2+ is the same chipset. The SFP ports have been the biggest issues for others. See thread right above yours or click below for more info. https://forum.mikrotik.com/viewtopic.php?f=17&t...

JJT211

Support sent me a copy.

I tried contacting support and theyre stonewalling me. Which switch did you get the RC6 version from? CSS610-7R (netpower) or the CSS610-8G-2S+ ?? If you have the Netpower firmware, could you email it over?

JJT211

I am on 2.13rc5, followed support response steps in one of the first posts. I am getting 96% packet loss with vlans. I can wait anymore, I need vlans. Is there any update from MikroTik please? Any newer rc build? It can’t be any worse for me. I will be forced to order different hardware within days...

JJT211

We got VLAN support working in RC6. Nice, thanks for the heads up!! Thats all I really need! EDIT: Just stumbled upon below support response from another thread. Got my VLANs working now First, try to disable the "Add Information Option" under the System menu. For access or untagged ports...

JJT211

Agreed, the LONG wait makes it that much worse. This is going on 3+ months now right? How hard is it to fix basic VLAN functionailty? I wonder if its some core hardware issue. If thats the case, why are they still selling it? If not, and giving the development team the benefit of the doubt, its a al...

JJT211

BUMP

Anxiously waiting on basic VLAN support. I dont even care about the SFP issue. Just get the VLAN issue working ASAP. Ill take another rc firmware. As long as we at least have VLANS

JJT211

OMG, yea seriously!! Im LIVID I got this switch with a specific project in mind and cannot believe this has been released without even the most basic VLAN functionality. Ive spent hours questioning my skills and sanity. Now I have to rethink this whole thing and try to come up with some BS explainat...

JJT211

I run a WISP and started out with Mikrotik about a year ago. Im light years of where I was then and my current firewall is crap. My primary motivation though is that im pushing to move our sites to dual stack IPv6. There's loads of different firewall examples, but the one I do like the most and seem...

JJT211

Im trying to get a feel for the difference in the wifi perfomance of these 3 devices. I understand that the strength of the Audience is using 2 in Mesh mode, but how about it by itself vs the other 2? Also I see the new Hap ac3 has external antennas but the specs show that the Hap ac2 has a higher t...

JJT211

My current dual WAN mangle rules are the first list. They been working flawlessly the last 6 months or so. Now I'd like to add some addtional mangles for QOS. Would these (2nd list) interefer with the above dual WAN by changing packet marking? Does rule order matter? Should QOS be before or after th...

JJT211

Yea, im thinking of doing something very similar. I believe if both ends are configured as untagged ports, you are good to go. Just plug and play

JJT211

Ok thanks for the heads up. I noticed after I posted this a few more scripts and a few other things inside my router that I had to delete. Since, this Mikrotik is being used as a DMZ between the internet and my firewall, I figured I may be ok and wont worry about the reconfiguration. But I think you...

JJT211

Old thread, I know, but I think its worth bumping. I had same thing happen to me. There were 2 ptty scripts in my scheduler. I had my router exposed to WAN with default username only a matter of minutes but didnt notice the script until a few days later. I deleted scripts, the admin user, the new ro...

Search found 86 matches