problem was in firewall rule "block invalid packets" - it blocks GRE. i set rule to "block invalid TCP packets" and now all works fine

i have windows PDC with Radius and Mikrotik with "use radius" checked and radius server set: Telegram (205082)_2021-11-29_13_33_16.jpg but pptp log shows that authentication goes as simple mschap2 no radius at all: zhura@10.10.201.1 (RVR-MT-MAIN) - WinBox (64bit) v6.49.1 on CHR (x86_64)_20...

i'm not sure i follow you... are you suggesting to move first rule down? or altering some bottom rule? or adding new rule with allow signal range (and on which position?)? see screenshot: zhura@10.10.201.1 (RVR-MT-MAIN) - WinBox (64bit) v6.48.3 on CHR (x86_64)_2021-08-02_08_45_00.jpg it seemes from ...

how is your "Access List" looks like?

like this:
https://clip2net.com/s/4cLmK8g

new problem: mikrotik hAP ac lite has two wifi bands 2.4 + 5 CAPsMAN creates two interfaces for them. some notebooks makes infifnite jumps between those interfaces. sessions constantly interrupting. users complaining on RDP and VoIP crashes maybe it's not mikrotik but windows10 needs some adjustment...

it seemed to me that i don't understand parameter "Tx power"
i've setting it to -15 .. -21 but AP ranges are still ovelapping :(
maybe i should delete cap interfaces after each parameter change and create again?

sorry for necroposting but are there any suggestions beside changing buffer from 50 to 250?
i have 2mbit ovpn connection over 30mbit internet channel :,(
before changing from 50 to 250 was 1mbit, but 2mbit are still too slow...

Welcome to WiFi world... If capsman and all wifi AP are correctly configured, the users rarely notice when AP switch happen thanks :) but please evaluate "correctly" in full possible detail... By increasing TX-Power on the AP you will, most likely just create more noise, than quality of t...

i've constructed some simple queues: /queue simple add limit-at=5M/5M max-limit=50M/50M name=total-out queue=\ pcq-upload-default/pcq-download-default target=WAN1 total-queue=\ ethernet-default add dst=bridge-g limit-at=1M/1M max-limit=10M/10M name=guest parent=total-out \ queue=pcq-upload-default/p...

thanks for clarification. i guess i must decrease tx power on AP. but doesn't this result in bad-connection or some packet-lost ? and thus leading to reconnection attempts for clients to find better AP...

thanks for reply. signal strength floating from -30 to -60 for users sitting within 3-5m from AP (hAP mini) another AP (also hAP mini) placed 30m away. maybe i can somehow increase transmitter power on problematic AP?

i have 3 hAP mini connected to a CHR central router with working CAPsMAN. wireless clients frequently jumping between AP (hAP). users are very upset - every time they loosing all connections and have to reconnect to remote_servers/vpns/chats/voise_sessions/etc. and they are not roaming office with n...

understood. thank you.

https://c2n.me/4aMVj07
see. when i do put [/ip firewall mangle get number=1 packets] in terminal i get 6 and this is right nubmer
but in my script :set numnew [ /ip firewall mangle get number=1 packets ]; returns 8(!)
what am i doing wrong??

my question was "when" not "where"

One thing i instantly noticed is that /export never terminates. Tried to reset to an empty configuration, same thing. When i run /export verbose the last thing that gets displayed is /radius incoming set accept=no port=3799 and then it hangs forever. Export problem is known, /routing menu export is...

i have another problem with wifi. it seemes to drop speed tenfold after several days of working without reboot. reboot solves wifi speed problem but again only for several days. help needed :( Write a simple scheduler and and script to reboot it every 48 hours. Professionally... We put a stop on Mi...

i have another problem with wifi. it seemes to drop speed tenfold after several days of working without reboot. reboot solves wifi speed problem but again only for several days. help needed