I hope that this function will be implemented. Because of this missing function, we had to use another manufacturer for our BNGs :cry: We use central Kea DHCP servers for IPv6 prefix delegation to our customers. Feature request When a prefix delegation option is found by the relay agent, the relay a...

CRS Port Security - max-mac-count When using port security, the switch will stop learning the ports specified when the new MAC address reaches the configured maximum number. Only in the dynamic or static address table already stored on that port is the source address authorized to do the following o...

Will this feature (IPv6 DHCP Relay installing Prefix Route) perhaps be implemented in RouterOS 7?

I suspect shaper because it is egress traffic. vlan-id rate limit should be as far as I know egress direction only. Example Config /interface ethernet switch rule add ports=ether1 switch=switch1 vlan-id=123 rate=10M Is rate=10M a policer or shaper? For ingress traffic QoS policer is used, for egress...

Feature requests IPv6 DHCP Relay - Prefix Delegation - create route Currently (6.48beta48 and 7.1beta2) the relay does not create a route for the prefix. Without the route on the relay router, the prefix is not reachable. further description: https://forum.mikrotik.com/viewtopic.php?t=117283 https:/...

What's new in 6.48beta48 (2020-Oct-14 10:26):
*) traffic-flow - added NAT event logging support for IPFIX;

this is great. looking forward to the final 6.48 release.
I will test it with nfdump 1.6.21 collector.

+1
i know it's an old topic, but it's important.
the route is required, otherwise the prefix is not reachable.

viewtopic.php?t=117283

could you please share the script? that would be really nice.

Has anyone given the new MikroTik CRS326-24S+2Q+RM a try?

Yes, got a CRS326-24S+2Q+RM yesterday (great device, many switch chip features).
Works great in conjunction with CRS328-4C-20S-4S+RM.
No more SFP+ 10G Port flapping (we have one CRS317-1G-16S+RM in RMA).

Yesterday connected the new one CRS317-1G-16S+
On it, not one flap happened.

So it could really be a hardware problem

And also noticed a strange thing.
Interface status, last link up / down shows a strange time.

time is not right for me either. strange bug...

CRS317 and CRS328 would be a great hardware combination and ideal for FTTX deployments.
I hope that the error can be corrected with a software update.

Both devices work great (in my case), if they are not connected to each other.

First, I love MikroTik products and RouterOS. It was a big mistake to buy the combination (1x CRS317-1G-16S+ and 2x CRS328-4C-20S-4S+). The expectation was that it should work fine, because it goes from the same manufacturer to the same manufacturer :) 10G to 10G Fiber SFP+ Tests with RouterOS 6.45....