is this specific to v4 ? I have 3.30 running and this /tool user-manager user reset-counters [/tool user-manager user find subscriber="reception"] does nothing i tried adding a comment and searching for the comment and that doesn't work either I only have 200 users here that I want to rese...

Hello All I have the following problem with mangling, routing and simple queues. What I am trying to do is route traffic based on dst port through two interfaces, call them int1 and int2, i.e 80, 443, voip, over a certain interface and 25, 110, 143 etc over another interface. To do this I am marking...

dont worry , was having a blonde moment , i will just move CF do different machine that has ide

Dean

is an older image available ?

I dont have facility to do other options

If you add an ip pool and dont select any ip the winbox app crashes.

Dean

In that situation I'd prefer to just add a route to your wlan1 network 172.16.0.0 via your MikroTik router on your internet gateway. Ok this all makes sense with the route on my gateway I can connect to the network. I suppose my last question is how do I prevent all machines in the 172.16.0.2-172.1...

Yes, that's correct. Do I assign the lan ip 192.168.3.11 and the wlan2 ip 192.168.3.12 and then create the bridge and add these two interfaces to the bridge ? Does the bridge itself not get an IP ? Why would you want to masquerade between between lan and wlan1? Just masquerade to the internet and r...

Hi Guys I have an integrated board with an atheros5213a I want to setup 2 seperate wireless networks one for me and one for clients. I have setup already ether1 with ip on my lan 192.168.3.11/24 and wlan1 with 172.16.0.1/24 I then enable masq for wlan1 and setup dhcp etc and can connect using 40bit ...

I currently have 2 senao aps in wds mode and I am able to transmit ipx between remote networks quite happily . I intend to replace one of the aps with MK so I hope this will work.

Dean

So do you not see as much gain in using one antena-a fro transmit and antena-b for recieve , as you would for using nstreme2 what would be a fair comparison ?

Dean