Community discussions

MikroTik App

Search found 39 matches

by SpongeB0B
Thu Dec 12, 2019 12:17 pm
Forum: General
Topic: Forward DNS/web site to a local IP
Replies: 13
Views: 4355

Re: Forward DNS/web site to a local IP

Thank you @mkx !

no, on this machine I run just only a reverse Proxy, Si i guess I will go for HAproxy.
Can we "easily" reverseproxy website who are running on HTTPS ? (wordpress for exemple)
by SpongeB0B
Wed Dec 11, 2019 3:08 pm
Forum: General
Topic: Forward DNS/web site to a local IP
Replies: 13
Views: 4355

Re: Forward DNS/web site to a local IP

..I do use HaProxy (free, fast) for multiple servers/cameras etc on my inside network. HaProxy can rederect/load balance use HTTPS +++ For example config, just ask, and I will give you a minimum config. finally I have the time to take care of this.. I tried with my DDNS providers (dynu.com) But I d...
by SpongeB0B
Mon Dec 09, 2019 2:50 pm
Forum: Beginner Basics
Topic: Unstopable DSTNAT
Replies: 17
Views: 4878

Re: Unstopable DSTNAT

Good to hear you resolved the issue. For future reference, the traffic between 2 IP addresses belonging to the same bridge and same subnet does NOT go through the firewall as it is a Layer-3 firewall (unless you have enabled the use-ip-firewall option under /interface bridge settings). Thank you ve...
by SpongeB0B
Wed Sep 04, 2019 9:04 pm
Forum: Beginner Basics
Topic: Unstopable DSTNAT
Replies: 17
Views: 4878

Re: Unstopable DSTNAT

Hi everyone, Little update, I've spend few hours to test everything's, I tried also with different routers (DD-wrt, OpenWRT, Stock D-Link and Stock Asus) So I don't experience this Unstoppable DSTNAT anymore, it might be the WP server itself, for what I read and experienced changing the domain or IP...
by SpongeB0B
Sun Aug 25, 2019 10:22 am
Forum: Beginner Basics
Topic: Unstopable DSTNAT
Replies: 17
Views: 4878

Re: Unstopable DSTNAT

Hi Sob, yes I do see https://192.168.0.X:54321 in browser's address bar... damn so it's the server ! damn why is doing this ? and why he is not doing it when connect directly to it.. so weird.
by SpongeB0B
Thu Aug 22, 2019 12:20 am
Forum: Beginner Basics
Topic: Unstopable DSTNAT
Replies: 17
Views: 4878

Re: Unstopable DSTNAT

Thank sob, but actually I try the opposite. So first from outside (wan side) this redirection was working (almost as I had the bug with the image not showing) but still trying to figure where is the problem coming with that. the redirection was outside :54321 to inside :443 so the port for the HTTPS...
by SpongeB0B
Wed Aug 21, 2019 8:49 pm
Forum: Beginner Basics
Topic: Unstopable DSTNAT
Replies: 17
Views: 4878

Re: Unstopable DSTNAT

Thank @Sob, So how can you explain when I plug my self (RJ45) directly to the host computer it's work (same IP) but when passing by the router not ! So I don't think it is WordPress or Browser issue but router, is doesn't contain any kind of creative module that would do anything not told it to do b...
by SpongeB0B
Wed Aug 21, 2019 7:42 pm
Forum: Beginner Basics
Topic: Unstopable DSTNAT
Replies: 17
Views: 4878

Re: Unstopable DSTNAT

@msatter, The router is not ok, Within the LAN side the router is not set to redirect anything (only if coming from WAN) furthermore the dstnat rules is disabled -> https://i.imgur.com/KB1F464.png and more the redirection point me the the outside port ! (dst-port and not the correct one ~"trans...
by SpongeB0B
Wed Aug 21, 2019 6:56 pm
Forum: Beginner Basics
Topic: Unstopable DSTNAT
Replies: 17
Views: 4878

Re: Unstopable DSTNAT

Damn 😠 ! it's the router !
I just connected directly to the machine who host the WordPress. and it work , no redirection...

Any ideas ? before I trow that piece of #@#*! in the trash ?
by SpongeB0B
Wed Aug 21, 2019 6:27 pm
Forum: Beginner Basics
Topic: Unstopable DSTNAT
Replies: 17
Views: 4878

Re: Unstopable DSTNAT

# aug/21/2019 17:07:40 by RouterOS 6.40.9 # software id = D4LD-IJ8C # # model = RB750Gr3 # serial number = xxxxxxxxxxxxx /interface ethernet set [ find default-name=ether2 ] name=ether2-master set [ find default-name=ether3 ] master-port=ether2-master set [ find default-name=ether4 ] master-port=et...
by SpongeB0B
Wed Aug 21, 2019 5:56 pm
Forum: Beginner Basics
Topic: Unstopable DSTNAT
Replies: 17
Views: 4878

Unstopable DSTNAT

Hi everyone, Few days ago I put in place a /ip firewall nat (dstnat) in order to reach a local hosted WP. So that dstnat was working. but I encounter problem witrh the WP itself (or might be the router finally) See: https://wordpress.org/support/topic/no-images-display-from-www/ Here my "dstnat...
by SpongeB0B
Sat Aug 17, 2019 12:58 am
Forum: General
Topic: DHCP server: Options
Replies: 4
Views: 1976

Re: DHCP server: Options

@Sindy Thbank you for your answer, yes I need to use the /ip dhcp-server option

Who do you get 0xc0a81301c0a82101 from 192.168.19.1 & 192.168.33.1 ?

Thank you
by SpongeB0B
Fri Aug 16, 2019 8:14 pm
Forum: General
Topic: DHCP server: Options
Replies: 4
Views: 1976

Re: DHCP server: Options

Yes, I found ! the 6 work ! but the client receive only one DNS IP
Did you know how to pass the client two IP's ? (aka the Preferred and the Alternate )
by SpongeB0B
Fri Aug 16, 2019 8:00 pm
Forum: General
Topic: DHCP server: Options
Replies: 4
Views: 1976

DHCP server: Options

Hi everyone,

I would like for a DHCP client to give it a specific DNS , so trough the DHCP server: Options.

Which code/tag is it for the DNS ?
https://www.iana.org/assignments/bootp- ... ters.xhtml

The 6 or 15 ? Thank you.
by SpongeB0B
Thu Aug 15, 2019 1:26 pm
Forum: Beginner Basics
Topic: Blocking one device to communicate outside.
Replies: 0
Views: 730

Blocking one device to communicate outside.

Hello everyone, I would to block one device to communicate outside my Lan. So I Just created the rule number 5 0 chain=forward action=passthrough 1 chain=forward action=accept ipsec-policy=in,ipsec 2 chain=forward action=accept ipsec-policy=out,ipsec 3 chain=forward action=fasttrack-connection conne...
by SpongeB0B
Sun Aug 11, 2019 3:17 pm
Forum: General
Topic: Where are the log about the SNTP ?
Replies: 1
Views: 999

Where are the log about the SNTP ?

Hi everyone, I've setup my SNTP client and it look that it's working fine. https://i.imgur.com/qy8yKlS.jpg but when I do /log print I only see the line where I changed the configuration of the SNTP 20:37:48 system,info SNTP client configuration changed by you but not when the system check/correct th...
by SpongeB0B
Sun Aug 11, 2019 1:34 pm
Forum: Beginner Basics
Topic: Default NAT
Replies: 1
Views: 821

Default NAT

Hi everyone, is it normal that by default I have two srcnat ?? -> 0 ;;; defconf: masquerade chain=srcnat action=masquerade out-interface-list=WAN ipsec-policy=out,none 1 chain=srcnat action=masquerade out-interface=ether1 Is the rule 1 is not enough by her own ? meaning can I delete the rule 0 ? (I ...
by SpongeB0B
Sun Aug 11, 2019 11:40 am
Forum: Beginner Basics
Topic: What mean : Bridge All LAN Ports [SOLVED]
Replies: 5
Views: 16241

Re: What mean : Bridge All LAN Ports [SOLVED]

OK, but by default Port 2 to 5 are switched together, but without wireless and port 1 (aka WAN) right ?

Image

port 3,4,5 are slave of Port 2 and therefore this is switched correct ?
Image
by SpongeB0B
Sat Aug 10, 2019 8:03 pm
Forum: Beginner Basics
Topic: Tools\ Btest Server
Replies: 2
Views: 1181

Re: Tools\ Btest Server

I wanted to be sure that it was the same thing because it has two different name in the WebFig and in the online help.
by SpongeB0B
Sat Aug 10, 2019 8:01 pm
Forum: Beginner Basics
Topic: Edit a firewall filter [SOLVED]
Replies: 3
Views: 1405

Re: Edit a firewall filter [SOLVED]

Thank you for the information,

But is it possible and how ?
by SpongeB0B
Sat Aug 10, 2019 7:59 pm
Forum: Beginner Basics
Topic: Trying to understand the firewall workflow in MikroTik
Replies: 5
Views: 2322

Re: Trying to understand the firewall workflow in MikroTik

Thank you very much @pe1chl for your extensive answer ! I have stopped already those services, but I would like to close also all the remaining ports from the firewall. I guess I will do this: chain=input action=accept connection-state=established,related chain=input action=drop connection-state=inv...
by SpongeB0B
Sat Aug 10, 2019 7:14 pm
Forum: Beginner Basics
Topic: Trying to understand the firewall workflow in MikroTik
Replies: 5
Views: 2322

Re: Trying to understand the firewall workflow in MikroTik

Thank you @pe1chl ! The "dynamic" rules are inserted automatically You mean they are default rules or it might happen that in the futur appear other Dynamic rules ? if yes how are they generated ? The 3rd change is not required, everything is already dropped by default. If I'm not mistaken...
by SpongeB0B
Sat Aug 10, 2019 5:59 pm
Forum: Beginner Basics
Topic: Trying to understand the firewall workflow in MikroTik
Replies: 5
Views: 2322

Trying to understand the firewall workflow in MikroTik

Hi everyone, I'm currently setup my first MikroTik router (Hex: RB750Gr3) I have read all the chapter about the firewall but still certain thing are unclear... What are Dynamic rules ? and what is this rule ? /ip firewall filter print dynamic Flags: X - disabled, I - invalid, D - dynamic 0 D ;;; spe...
by SpongeB0B
Sat Aug 10, 2019 5:37 pm
Forum: Beginner Basics
Topic: Edit a firewall filter [SOLVED]
Replies: 3
Views: 1405

Edit a firewall filter [SOLVED]

Hi everyone, I edited one of my firewall filter trough the WebFig and the WebFig add un-needed command (in red) (I just paste the needed filter (number 2) /ip firewall filter print chain input 2 ;;; defconf: accept ICMP chain=input action=accept protocol=icmp in-interface=ether2-master log=no log-pr...
by SpongeB0B
Sat Aug 10, 2019 3:07 pm
Forum: Beginner Basics
Topic: What mean : Bridge All LAN Ports [SOLVED]
Replies: 5
Views: 16241

Re: What mean : Bridge All LAN Ports [SOLVED]

OK, but by default Port 2 to 5 are switched together, but without wireless and port 1 (aka WAN) right ?

Image

port 3,4,5 are slave of Port 2 and therefore this is switched correct ?
by SpongeB0B
Sat Aug 10, 2019 12:08 pm
Forum: General
Topic: Supout.rif reader available
Replies: 34
Views: 39236

Re: Supout.rif reader available

Is MikroTik is planning an offline program to read .rif files ?
by SpongeB0B
Sat Aug 10, 2019 11:41 am
Forum: Beginner Basics
Topic: Tools\ Btest Server
Replies: 2
Views: 1181

Tools\ Btest Server

Hi everyone,

Is the Tools\Btest Server
Image

What we can read here : https://wiki.mikrotik.com/wiki/Manual:Tools/Speed_Test

?? Confused
by SpongeB0B
Sat Aug 10, 2019 10:38 am
Forum: Beginner Basics
Topic: What mean : Bridge All LAN Ports [SOLVED]
Replies: 5
Views: 16241

What mean : Bridge All LAN Ports [SOLVED]

Hi Everyone, I just reset my RB750Gr3 and on the first page : 192.168.88.1/webfig/ I can see Bridge All LAN Ports what it is meaning ? By default ports cannot communicate between them ? or it bridge port one to the rest ? I couldn't find the info on https://wiki.mikrotik.com/wiki/Manual:TOC or on th...
by SpongeB0B
Mon Jul 22, 2019 10:53 am
Forum: General
Topic: Forward DNS/web site to a local IP
Replies: 13
Views: 4355

Re: Forward DNS/web site to a local IP

I've discover an interesting solution , by the DNS record of the DDNS service (that not resources consuming) I believe that if you have multiple websites behind a router, access to each website would require different ports through the router, one for each address. I think you'd have to set up your ...
by SpongeB0B
Sun Jun 30, 2019 9:41 pm
Forum: General
Topic: Forward DNS/web site to a local IP
Replies: 13
Views: 4355

Re: Forward DNS/web site to a local IP

Thank you @ingdaka for the moment the isp router is in router mode (but I'll change this in a near futur and only my Gr3 will "route")
by SpongeB0B
Fri Jun 28, 2019 4:12 pm
Forum: General
Topic: Forward DNS/web site to a local IP
Replies: 13
Views: 4355

Forward DNS/web site to a local IP

Hi everyone, I have two Virtual Machine inside the computer A. https://i.imgur.com/JxXZqbB.png I would like the outside people be able to reach one hosted website on the VM1 Is there any possibility inside the RouterOS to redirect the traffic according the URL ? I'm using a Dynamic DNS ( VM1.DDNS.co...
by SpongeB0B
Wed May 29, 2019 1:38 pm
Forum: General
Topic: Where found good documentations, tutorials
Replies: 2
Views: 767

Where found good documentations, tutorials

Hi everyone,

Is there any books, online tutorial (not video) where we can learn everything's about the Router OS ?

Thank you,
Bob
by SpongeB0B
Wed May 29, 2019 1:31 pm
Forum: Beginner Basics
Topic: where find a good tutorial for the certificates
Replies: 1
Views: 695

where find a good tutorial for the certificates

Hi everyone,

I would like to enable the service www-ssl but to do so I need to generated a self sign certificate. how can I do that ?

Thank you.
by SpongeB0B
Wed May 29, 2019 12:55 pm
Forum: General
Topic: Default config, ether2-Master what is the master ?
Replies: 1
Views: 1324

Default config, ether2-Master what is the master ?

Hi everyone,

I see in the default DHCP server , in the interface column ether2-master
Image

So did only the port 2 will receive DHCP lease ? or do the ports 3,4,5 are bridged to the 2 ? where can I see this setup ?

Thank you
by SpongeB0B
Wed May 29, 2019 12:12 pm
Forum: General
Topic: Firewall\Nat port forward
Replies: 4
Views: 1249

Re: Firewall\Nat port forward

Thank you @vilpalu

so 0.0.0.0 by default in ROS many any IP correct ?

But If I let that as □ 0.0.0.0 (unchecked) it mean that all IP incoming dst IP will be accepted. how can I define the current ISP IP ?
by SpongeB0B
Wed May 29, 2019 12:07 pm
Forum: General
Topic: DHCP server, reserved IP
Replies: 1
Views: 614

DHCP server, reserved IP

Hi everyone,

I would like to change the default DHCP server set in my Hex router.

I would like to
  1. change the network 192.168.88.0/24 to for example 192.168.92.0/24
  2. have reserved DHCP IP for specific MAC addressee
Is this possible with the ROS ?
by SpongeB0B
Wed May 29, 2019 11:38 am
Forum: General
Topic: Firewall\Nat port forward
Replies: 4
Views: 1249

Firewall\Nat port forward

Hi everyone, I would like to create a port forwarding (From my external IP (ISP) to my internal network) I read this page https://wiki.mikrotik.com/wiki/Manual:Initial_Configuration#Static_configuration https://wiki.mikrotik.com/images/3/35/Dst-nat.png So this bring two questions : My Dst adresse is...
by SpongeB0B
Wed May 29, 2019 11:02 am
Forum: General
Topic: Enable NTP Client [SOLVED]
Replies: 4
Views: 2186

Re: Enable NTP Client [SOLVED]

Thank you @normis
Yes I just need FTP client functionality. Let say I would like to use this server NTP.example.com

So I can let the first Primary NTP server as 0.0.0.0 ?

Image
by SpongeB0B
Wed May 29, 2019 10:39 am
Forum: General
Topic: Enable NTP Client [SOLVED]
Replies: 4
Views: 2186

Enable NTP Client [SOLVED]

HI everyone,

I just bought a Hex (RB750Gr3) I would like to get the time for this device trough NTP.

I see SNTP but no NTP, I dig inside the online manual but couldn't ound how to enable/install a NTP client..

Thanks B0B